- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Machine Operation Resume Samples
Extruder Operator Resume Samples
No results found
0-5 years of experience
Supervised a team of extruder operators and blender-men for the manufacturing of high-quality thermoplastic resins
- Trained new hires on job-related tasks including extruder machine operations, blending, and safety and ISO 9001 procedures
- Performed routine quality inspections on final product and safety inspections on machines
- Initiated and maintained communications with plant and product managers, lab technicians, and other shift supervisors regarding machine performance and produced material
0-5 years of experience
Oversaw final jacketing process of 1.5 inch fiber optic cables.
- Programmed extruder and selected proper cabling materials per customer specifications.
- Ran test samples of cable for quality control inspection and made adjustments as needed prior to producing final cable.
- Ensured that all aspects of machinery were running properly during the manufacturing process.
- Performed regular preventative maintenance and cleaning of equipment.
0-5 years of experience
- Inspected, tested and operated extruder machinery and Toyota fork-lift equipment for PVC pipe
- Contributing member of a high-performing team that produced up to 317,000 feet of PVC pipe
- Conducted daily quality control checks on product up to 3,000 pounds resulting in low return rates
0-5 years of experience
Responsible for set-up and operations of extruder machinery.
- Provided production report of the product produced as required; processing information and verifying information or data.
- Maintained a safe work environment and used proper safety devices as provided.
- Adjusted machine components to regulate speeds, pressures, and temperature, and amounts, dimensions, and flow of materials or ingredients.
- Clear jams, and remove defective or substandard materials and products.
- Move materials, supplies, components, and finished products between storage, and work areas, using work aids such as racks, hoists, and forklifts.
- Monitored productivity and maintained production levels to support plant objectives.
- Contributed in enhancing plant projects output.
6-10 years of experience
- Operated Troester, Berstorff and Davis Standard extruders.
- Diagnosed, and repaired equipment to operate efficiently and safely.
- Reviewed incoming, and completed production orders and maintains related records.
- Trained several new employees.
0-5 years of experience
Manufacturing of medical catheters and tubing using several different polymers (nylon, peak, PE, PVC, etc.)
- Products from single Lumen to 24 Lumen OD’s from .015″ to 3″, walls as thin as .002″, specs with a tolerance of +/- of 2 thousandths of an inch
- Maintained the high quality standard mandatory in medical manufacturing, while upholding quantity demands
- Operated extruders that used ranges from 12mm to 1.5″, vacuum tank, RDN cutters and pullers
6-10 years of experience
- Second in charge of all machine operations for entire department.
- Trained all new employees and ensure all new hires are versed in safety policies.
- Product tracking via computer generated labeling, operators reports, and holding
- Maintained a 100% safety record, reducing liability claims/ losses by numerous
- Helped build morale and reduce employee/ operator turnover.
- Outstanding technical/ mechanical aptitude. Troubleshooting and problem solving during all phases of production.
0-5 years of experience
Perform as a key component to the copper wire making process by applying nonconductive insulation around bare copper.
- Insures strict quality of finished product to one thousandths of an inch.
- Trained in the use of precision tools such as a micrometer.
- Trained in the use of forklifts and proper techniques to palletize products.
6-10 years of experience
Began working as a packer and became an extrusion operator after 11 months
- Responsible for set-up and operations of extruder machinery
- Monitored productivity and maintained production levels to support plant objectives
- Examine extruded products to ensure defective product is located and corrected
- Change products on extruding machines according to production line changes
- Preformed quality control on product testing to ensure consistency
- Maintained a safe work environment
- Ability to use hand tools, wrenches, scrapers, die gauges, screwdrivers and tape measures
0-5 years of experience
Detail oriented and able to follow detailed instructions
- Prepared, operated, and monitored equipment
- Extensively cleaned equipment to code procedures
- Performed machine adjustments and routing maintenance
- Performed product testing, entered data and compiled results as needed
10+ years of experience
Demonstrated ability to troubleshoot creatively, solve problems effectively, and make informed decisions while successfully guiding others through constant change
- Demonstrated excellent communication skills with staff, managers, and clients
- 8+ years of increasing responsibilities in the maintenence ceramic/brick industry
- My main machine is a cnc based x y z axis all computer controlled
6-10 years of experience
Prepare Extruder machine for operation and selecting all raw materials, additives and tooling needed for job.
- Continually conducts visual checks to insure equipment and devices maintain settings to meet specifications.
- Successfully meets standard production times.
- Maintains all equipment and workstation in clean and orderly condition following prescribed safety rules and regulations.
- Communicates scheduling with production supervisor.
- Conduct yearly inventory.
0-5 years of experience
Installation of injection molds 1000cc and 500cc, in addition to operating vulcanization presses
- Trouble shooting mold and machine issues while inspecting and maintaining quality parts
- Cleaned and prepped; cold jetting, sand blasting equipment and injection molds
- Follow quality standard work procedures while achieving every production target
- Entered daily records in data system
6-10 years of experience
- Operate, maintain, and repair the extruder machinery.
- Operate and maintain material flow machinery
- Perform quality control tasks, including caliper measurements, material density, material cohesion and adhesion,, and material constituent quality.
- Set up the dies, press tools and other hand-tools within the extrusion machinery and make certain the configuration matches the expected product specifications.
- Provided production reports of the product produced as required
- Assisted other operators in the daily operation of the extruder machinery.
0-5 years of experience
Performed double screw machine, finishing operator
- Utilized Honeywell 3000 monitoring and ERP Systems
- Followed all safety policies and procedures and immediately reported any unsafe conditions
- Set up equipment for production by operating valves and pumps, and ensured line ups were correct
- Tracked and recorded process information and production data
- Drew samples of products so analysis could be performed
- Monitored gauges, recorded instruments, flow meters, and products and ensured specified conditions were maintained
- Loaded and unloaded material containers such as tank cars, tank trucks, drums and totes
- Completed equipment log sheets
- Processed chemical products using batch sheet instructions
- Operated heavy equipment including: forklift, Aeril lift
0-5 years of experience
Load rubber in machine, set up computer to start product operations and control temperatures of machine.
- Assemble, change and disassemble parts, trim sector flash off tires
- Maintain quality assurance of production line by watching and reporting defects in product
- Supervised daily operations such as relief operation and producton assistance in a team oriented environment
- Record hourly production reports and ensure that quality assurance status’ are up to date
- Responsible for training new hires
0-5 years of experience
Responsible for mixing certain materials together to create thermoplastic pellets of all different shapes, color and sizes
- Process included oil injection, adding liquid color, disassembling and cleaning equipment for the next order.
- Scanned materials to place them into the order
- Operated a grinding wheel to sharpen blades for the extruder.
- Troubleshoot and repair end product.
6-10 years of experience
Tends machine equipped with air-jet chambers through which continous filament yarn is processed to change texture and increase bulk of yarn.
- Responsible for threading yard ends through machine guides, over feed rollers, air-jet chambers, and tension guides.
- Observed the process of yarn to dect any breaks in the yarn.
- Responsible for duffing, packaging, and inspecting the yarn.
0-5 years of experience
- Trained and educated new employees about materials, operations, and the set standards of the company
- Machine maintenance
- Forklift operator
- Produced acrylic, poly-carbon, PVC rigid and durable pellets
10+ years of experience
Operate machinery used in the production process, or assist machine operators.
- Examine products to verify conformance to quality standards.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Count finished products to determine if product orders are complete.
- Mark or tag identification on parts. Load and unload items from machines, conveyors, and conveyances.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
0-5 years of experience
- Executed daily operations of reading control plans, raw materials, kept a clean and safe working environment
- Loaded machine hoppers with mixed materials
- Started machines and set controls to regulate vacuum, air pressure, temperature and to synchronize speed of extrusion
- Changed dies on extruding machines according to production line changes
- Determined setup procedures and selected machine dies and parts, according to specifications.
- Shut down and complete changeover to run new product
- Replaced worn dies when products varied from specifications
- Troubleshot, maintained and made minor repairs to equipment.
- Trained new employees in loading hoppers and receivers, calibrating feeders and receivers, starting extruder, shutting down extruders, discharging hoppers and receivers
- Measured and examined extruded products in order to locate defects and to check for conformance to specifications and adjusted controls as necessary to alter products
0-5 years of experience
- Perform all tasks involved in the production of cable
- Follow standard work procedures and comply with all safety rules
- Perform machine set-ups, changeovers, and troubleshooting
- Perform equipment adjustments within the guidelines of the process master to meet production and quality expectations
- Complete and interpret statistical process control charts to keep the production process within limits
- Obtain and track the necessary materials for manufacturing on work orders
0-5 years of experience
Extrude PVC and Polyurethanes compounds to bare and preinsulated copper wire.
- Verify work orders and execute them as per specifications and knowledge.
- Perform Setups as necessary or as specifications.
- Maintenance of Jet Printers and Program them to specifications of the work orders.
- Maintenance of work area.
0-5 years of experience
Make sure that the part I am forming complies with the work order.
- At start of shift make sure the part tolerances are within pre-order specs.
- Every 20 mins check tolerances and profile.
- Make sure machine is filled at all times with plastic hips.
- Pack parts in boxes.
- Maintain a clean work area during and before end of shift.
0-5 years of experience
- Routinely inspected extruder to ensure and maintain operation
- Adjusted extruder during operation to keep hose within specifications
- Inspected hose for porosity and other malfunctions in hose
6-10 years of experience
- Operate plastic extrusion machines manufacturing plastic bottles (High Density, Polypropylene and/or PVC material)
- Make machine set up and adjustments as necessary
- Inspect material for defects (Improper weight, incorrect distribution, color issues, etc.)
- Maintain correct mixture/ blend of material and color utilizing Novatec and TruBlend blenders
- Work closely with quality control
- Record and calculate data for quality inspections and production report
6-10 years of experience
- Setup and run seven types of extruders
- Set and maintain pellet size and quality to customer specifications
- Trouble shoot any problems during extrution process
- Check material from mill area for contamination before extrution
- List all down times and run times for the exturder
0-5 years of experience
- Safely operated extruder machine
- Filled reservoir with correct plastic beads based on customer specifications
- Cleaned extruder between batches to ensure mixing didn’t occur
- Responsible for setting machine to operate at maximum efficiency
- Met or exceeded daily production quotas
0-5 years of experience
- Setting up and operating extrusion machinery according to customer-provided size tolerance
- Extruding, inspecting, packaging, and weighing product
- Documenting machine settings, product inventory and weight
- Certified in five different types of plastic extrusion – ISO 9001:2008