- Featured in:
-
More Marine Mechanic Resumes
Use these Marine Mechanic samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanics Resume Samples
Marine Mechanic Resume Samples
No results found
0-5 years of experience
Trouble shoot, repaired and tested ship propulsion machinery, auxiliary equipment, various electric motor and steam drive pumps.
- Determined the nature and extent of damaged or malfunction of equipment. Planned work procedures, using charts, technical manuals.
- Processed, labeled and secured parts of equipment. Kept area work clean prior to reassemble, ensured proper torque specification. Supervised and corrected parts ordered.
- Performed Automobile preventive maintenance such as brakes, tune ups, cooling system service, automatic transmission service, and clutch replacement.
- Constructed a customer data base to schedule upcoming vehicle maintenance.
- Inspected and scheduled maintenance repairs to keep all rooms in good living conditions.
- Identify automotive shop hazards and apply necessary steps required.
- Avoid personal or property damages by always emphasize on safety first.
- Identify and use of special equipment, measuring tools, pressure gauges, and instruments required to perform practical work on automotive.
- Ability to operate, read and interpret hand held scanner tools and data perform scheduled preventive maintenance tasks.
10+ years of experience
Diagnose and repair Yamaha and Mercury inboard and outboard engines and drives; engine tear downs and rebuilds.
- Performed carburetor overhauls of all outboard and inboard engines; interior refurbishes; boat detailing; gel coat and fiberglass repair of boats, wave runners.
- Handled boat re-rigging and rigging of new boats; mounting of outboard motors and all steering and electrical components.
- Performed motorcycle and ATV repairs; all warehousing duties; and maintenance on all shop equipment.
- Initiated and completed all assessments of boats for trade in values, and fiberglass repair estimates.
- Set up boats for all major boat shows.
0-5 years of experience
Industry: Transmission Engineering Company specializing in Power train Components for the Marine, Industrial and Off-Road Markets
- Primary responsibilities were troubleshooting and conducting repairs/rebuilds on power train components, such as Marine Transmissions, Electronic Controls, Power shift Transmissions, Torque Converters, etc
- Demonstrated continual customer satisfaction with driven customer service skills, and the ability to interact with a multi-level customer base ranging from crew members, captains, to boat owners.
- Performed duties involving the guidance, or training to lower level mechanics and assisted the senior-level mechanic.
- Maintained the working knowledge of the mechanical, hydraulic, and pneumatic systems and components of diverse marine and industrial machinery and their attachments
- Demonstrated the ability to read and interpret symbols, blue prints, layout sheets, diagrams, schematics, technical orders, and manufacturer’s specifications.
- Analyzing and establishing degree of repairs necessary on engines, transmission and other boating systems.
- Ability to operate forklifts, pallet jacks and hand trucks.
0-5 years of experience
Industry: Transmission Engineering Company specializing in Power train Components for the Marine, Industrial and Off-Road Markets
- Primary responsibilities were troubleshooting and conducting repairs/rebuilds on power train components, such as Marine Transmissions, Electronic Controls, Power shift Transmissions, Torque Converters, etc
- Demonstrated continual customer satisfaction with driven customer service skills, and the ability to interact with a multi-level customer base ranging from crew members, captains, to boat owners.
- Performed duties involving the guidance, or training to lower level mechanics and assisted the senior-level mechanic.
- Maintained the working knowledge of the mechanical, hydraulic, and pneumatic systems and components of diverse marine and industrial machinery and their attachments
- Demonstrated the ability to read and interpret symbols, blue prints, layout sheets, diagrams, schematics, technical orders, and manufacturer’s specifications.
- Analyzing and establishing degree of repairs necessary on engines, transmission and other boating systems.
- Ability to operate forklifts, pallet jacks and hand trucks.
0-5 years of experience
Marine mechanic of primarily sail boats, custom boats and yachts
- Expert in gas, inboard and outboard motors, general maintenance on diesel engines
- Maintained all marina equipment and grounds.
- Performed routine maintenance on equipment on as-needed basis
- Repaired AC/DC circuits and multiple volt type 3-phase circuits
- Serviced equipment daily, reducing the need for new equipment leading to extensive cost savings
0-5 years of experience
Assisted in the Relocation and re-cabling of an over speed governor from inside the trunk to inside the machinery room.
- Replaced Knurl Rollers on 2 weapons elevators.
- Helped with a stanchion modification on an Air Craft Elevator on board the USS George H W Busch
- Replaced a guide roller on a sliding door on a personnel elevator on board the USNS Zeus.
0-5 years of experience
Responsible for repairing or detailing customers boats according to the work order that was written.
- Troubleshot and repaired electrical, fuel, ignition, and cooling systems.
- Installed accessories, such as; trolling motors, depth finders, lights, and stereo systems.
- Removed and replaced inboard and outboard engines.
- Winterized and summarized boats.
- Wrote work orders and collaborated with customer to help diagnose any problems.
- Called customers with estimates and explanations of what needed to be done to fix any problems.
- Attended OMC outboard service school.
0-5 years of experience
Repair maritime vessels for customers as needed.
- Worked on engines, plumbing and electric.
- Fabricated new parts and worked sheet metal as necessary.
- Evaluated problems and prepared estimates on time, work and parts needed to complete the work order.
- Prioritized work flow.
- Trained colleagues and new employees as needed.
- Communicated with management on a daily basis.
0-5 years of experience
Rebuilt marine engines including Mercruisers, Volvo Pentas, outdrives
- Completed oil changes, tune ups, winterizations, seasonal start ups
- Troubleshoot and diagnosed engines to identify problems
- Communicate problem to customer or business owner
- Ordered parts for repairs
- Conducted sea trials to ensure problem was corrected and vessel ran properly
- Utilized customer service skills to build customer relations
0-5 years of experience
Conducted and observed tests on machinery and auxiliary equipment. Performed periodic maintenance and repairs of ships main propulsion plant. Assist in the planning an implementation of maintenance and repair schedules. Completed dry dock operation. Trouble shoot and diagnose malfunctions in electrical equipment and controls, auxiliary equipment, hydraulic systems, and HVAC systems.
- Assist in dry dock removal and installation of Hydraulic steering system pump
- Conduct maintenance and repair of ship main propulsion plant([company name]), pneumatic system, and diesel generator
- Compiled readings for reverses osmosis system and fresh water tanks
- Calibrated and troubleshot auxiliary machinery and ships service diesel generator
0-5 years of experience
Develop and direct 12 Marine Mechanics during port and underway operations to inspect, perform preventive and unscheduled maintenance, troubleshoot and repair aircraft catapult steam launch and mechanical systems, engine boiler plant and mechanics, hydraulic aircraft elevator and steering systems, lifeboat hoists and pneumatic lift equipment.
- Prioritize and plan work, assigning to qualified 12 personnel. Review and approve work plans and materials, and conduct quality assurance inspections at all stages.
- Conduct daily inspections and tests of systems. Ensure clean spaces to protect systems and safety. Proactively identify and address any signs of wear, leak, corrosion or deficiency.
- Maintain technical resource library. Interpret and train staff in use of blueprints, schematics, engineering drawings, technical diagrams, troubleshooting and repair instructions.
- Coordinate work with other shops, trades and departments, planning for efficient troubleshooting, repair test processes. Work productively with electrical, fabrication, and hull technicians to maintain readiness and adapt to emerging priorities. Provide expertise to any department to troubleshoot complex and critical issues with mechanics, pressure systems, refrigeration, pumps or distillers.
- Prepare technical drawings of parts and components for fabrication department. Specify material and strength requirements.
- Mentor and train staff, continually aligning advanced challenges while providing oversight and support. Consistently instill strong ownership of mission.
- Present daily safety briefings and oversee safe work practices. Maintain MSDS and HAZMAT programs. Oversee 18 investigators in damage control inspections, drills and investigations.
- While underway, planned and executed critical replacements of catapult reducing stations, and complex repair to maintain mission. During overhaul period, coordinated with shipyard and other shops to replace 4 steering units, working in tight time frames while ensuring quality assurance throughout project.
- Recognized for achieving continuous outstanding readiness of Catapult systems, facilitating over 11,700 aircraft launches per year. Achieved no accidents/no incidents/no discrepancies.
6-10 years of experience
Performing specialized mechanical repair and overhaul work on marine engines, outboard motors, gasoline and other related system
- Performing the tasks of testing marine engines and related equipment
- Handling the tasks of repairing and maintaining valves and hydraulic equipment
- Performing the tasks of repairing marine engine as well as equipment by using power and hand tools
- Handling the responsibilities of writing specifications for purchase of marine equipment
6-10 years of experience
Idle motors and observe thermometers to determine the effectiveness of cooling systems.
- Set starter locks and align and repair steering or throttle controls, using gauges, screwdrivers, or wrenches.
- Adjust carburetor mixtures, electrical point settings, or timing while motors are running in water-filled test tanks.
- Repair engine mechanical equipment, such as power tilts, bilge pumps, or power take-offs.
- Inspect and repair or adjust propellers or propeller shafts.
0-5 years of experience
- Repaired and maintained outboard, inboard, and stern drive marine engines.
- Overhauled engines, rebuilt carburetors, and repaired drive trains.
- Rewired electrical systems, tuned up engines, repaired fiberglass bodies and fuel systems.
- Maintained and repaired boat trailers, including brakes, electrical systems, and structural repairs.
0-5 years of experience
As a mechanic and electrician in a large yacht yard I was responsible for entire yard maintenance as well as yachts.
- Gained experience in new yacht construction and wiring gauges.
- Installation and removal of diesel engines.
- Removal, repair and reinstallation of bow thrusters, bearings, seals and wheels, steering components, pumps, motors both A/C and D/C, engine and shaft alignment.
- Performed installation, removal and repair on satellite tracking dishes
- Installation of low voltage lighting and underwater lighting.
0-5 years of experience
Responsible for all mechanical problems and maintenance
- Performed oil changes and rigging, as well as the repair and maintenance of water pumps, starters, and props
- Responsible for submitting work orders
- Provided excellent Customer Service
0-5 years of experience
Repairs to Wood damage, Painting, Plumbing, Electrical, Appliances needed to restore items to a functioning condition
- Install or replace new Appliances such as Insert Ovens, Stoves, Stove tops, Dishwashers, Microwaves
- Repair, relocate or replace doors, cabinets, windows according to customers needs
- Diagnose, repair Outboard, In-board Outboard, full inboard, Jet ski
- Rig ready / Restore new purchase, used purchased and customer boats with depth finders, GPS, Anchor winches, Radios and anything not on board at time of service
- Gel coat repairs
- Trailer repairs, bearing replacement, repacking, Bunk repair, winch repair, ect
0-5 years of experience
Assisted sales team members with product information.
- Performed routine maintenance and diagnostic procedures on marine craft
- Assembled/Disassembled as well as installed and repaired: engines, electronics, and marine outdrives
- Tested defective wiring with multi-meters
- Maintained mechanical parts (bushings, bearings, etc) by using micrometers and feeler gages
- Performed metal, wood and fiberglass fabrication
6-10 years of experience
Repair marine vessels including tubs, barges, cranes, onshore equipment.
- Successfully repair generators, pumps and drive engines to bring all equipment to working order.
- Responsible for welding on all equipment.
- Electrical repair from 12V to 440V.
- Follow safety procedures ensuring a safe work environment.
- Recognized for knowledge of diesel engines.
0-5 years of experience
- Laying out, aligning, installing and repairing the Ships main propulsion.
- Installing reduction gears, bearings, shafting, shafting propeller and rudders.
- Connecting various systems, parts, accessories, and lubricating systems.
- Installing cooler, compressors, pump, blowers and similar equipment.
- Assisting in the installation, overhaul, modification, maintenance on board ships.
10+ years of experience
Diagnosed and repaired boats and other marine vehicles.
- Obtained knowledge and experience on the operations and repair of ATVs, snowmobiles and automobiles.
- Created repeat business by treating each customer as a highly valued individual.
- Sold boats and motors, along with a variety of marine accessories.
- Self-managed for the last six years and also chosen to train new employees.
0-5 years of experience
Daily marine mechanic work on various sizes and styles of boat crafts
- Sub contractor on engine work, electrical, plumbing and rigging
- Responsible for mobile and on water repairs, water testing and trouble shoot all problems that occurred.
- Prepared accurate assessment for repair with allotted time, parts list, and availability
- Prepared information needed to obtain price quotes
10+ years of experience
Maintained, repaired, overhauled and operated
- diesel engines, steam generators, machines and related mechanical equipment on ocean-going vessels
- fuel system components, such as fuel injectors, high pressure fuel pumps
- variety of hydraulic and pneumatic equipment
- various types of pumps
- Read and interpreted engineering blueprints, diagrams, and sketches
0-5 years of experience
Proficient in maintenance, repair, rebuilds and repowers of inboard, outboard and stern drives
- Performed extensive fiberglass repair
- Installed marine electronic and navigational instruments/systems
- Used forklift and travel lift for boat placement in and out of water
0-5 years of experience
Responsible for maintenance & repair of auto and marine engines
- Performs specialized mechanical overhaul & repair on gasoline and marine engines, outboard motors, and related marine equipment & systems using schematic charts and technical manuals
- Establishes and maintains a preventative maintenance program for marine engines
- Test engines and equipment to determine need for repairs or adjustments
- Repairs and maintains hydraulic equipment and valves
- Operates hand and power tools associated with engines
10+ years of experience
Troubleshoot ,repair, overhaul marine Cat engines such as 3400E, ACERT C-18, 3500E series, HEUI C-30
- Repairing Hamilton jets, marine gears, compressors.
- Fixing hydraulic steering, Pneumatic and electric control systems.
- HAVC work.
10+ years of experience
Examines vessels to determine maintenance and repairs required.
- Performs repair work on vessels; maintains repair records.
- Installs in-ground piping; completes plumbing and electrical as needed.
- Travels to various locations to pick up boats for transport by water.
- Communicates with customers to discuss repair work and cost estimates.
0-5 years of experience
Installed complete hydraulic and mechanical steering systems
- Built engine beds and installed and aligned engines, prop shafts and struts
- Laid out and installed fuel and freshwater systems including all tanks
- Created layout for all heat and air conditioning systems
- Located and installed all through-hull fittings and seacocks
- Fabricated fiberglass and wood shelving for various components throughout the hull
0-5 years of experience
Perform general maintenance and warranty work
- Pull prop, lap props, inspect props for damage
- Split couplings, dial indicate shafts, check strut bearing for play and wear
- Check zincs for wear and replace as needed
- Fix items on work order in a timely matter and order parts as needed
- Work with other technicians as needed to troubleshoot problems and install equipment
0-5 years of experience
- Rigging and installation of new equipment on new and used boats
- Experienced in Customer Service Relations as acting Service Manager
- Prepared and filed warranty work between dealer and manufacturer
- Prepared customer invoices
- Provided repair and maintenance on inboard and outboard engines (Mercury & Yamaha)
- Ability to work independently with an attention to details
- Highly skilled in problem solving, able to devise and implement solutions in a timely manner
10+ years of experience
Machining of made to order parts for specific projects
- Large prototype project; World’s first submersible power boat
- Supervisor of operation and construction
- Production and maintenance of fiber glass molds
- Fabrication and testing of electrical, mechanical, hydraulic, and air systems
- Construction of all steel and stainless steel materials for projects
0-5 years of experience
Tested machinery, equipment and parts to identify any defects
- Disassembled broken and defective equipment to facilitate repair, and reassembled when complete
- Assembled and installed wiring, electric and computer components
- Cleaned and lubricated boats, machinery and equipment
- Assembled and maintained physical structures using hand and power tools
- Operated hoists
- Checked fluid levels and replaced filters
- Replaced worn and damaged hoses, wiring and belts
- Maintained up-to-date and accurate repair logs
- Read manufacturer manuals, diagrams and specifications prior to repairing equipment
0-5 years of experience
Organization and tracking of all customer warranty paperwork and payments
- Scheduling of Maintenance & Delivery of boats, Boat Rigging
- Several phases of marine mechanics, including light electrical work
- Organization of boatyard
- Oversight of all customer relations and quality assurance issues
0-5 years of experience
Cultivate interest from prospective clients and partners. Responsible for “as found” reports for clients.
- Pump and Valve rebuilds and maintenance
- Rebuilt High Pressure Air valves on an assortment of US Navy
- Supports systems alterations, new installations, and repairs.
0-5 years of experience
Rigged new boats and installed various outboard engines
- Installed stereo systems, VHF radios and options
- Water tested and inspected all boats.
- Welcraft warranty work.
0-5 years of experience
- Repair and tune-up and re-power engines
- Install pumps, radios and accessories on boats
- Sea trial troubleshoot and repair boats
Rate This Article
[Marine Mechanic]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
