- Featured in:
-
More Naval Architect Resumes
Use these Naval Architect samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Architecture Resume Samples
Naval Architect Resume Samples
No results found
6-10 years of experience
Performed field investigations to evaluate existing conditions and deterioration of steel structure and made recommendations for repairs.
- Designed and analyzed structural elements including decks, bulkheads, hulls, platforms, foundations and structural supports for shipboard systems.
- Prepared and checked plans assuring the work complied with AISC and applicable navy specifications and standards.
- Provided engineering design support to the production department to solve problems that arose during fabrication and construction.
- Provided construction management support on a large water system improvement contract which installed over 12,000 feet of piping and two new pumping stations along with other improvements.
- Worked on a special team which used new technologies for highly accurate industrial measuring. Led the team for three months, incorporating industrial photogrammetry as a measurement tool for rehabilitation work.
0-5 years of experience
Developed hull lines in Rhino for a fireboat, used GHS to make initial stability predictions for hullform, and performed
initial ABS structural calculations for Ice-class.
- Analyzed three separate hullforms (monohull, catamaran, and trimaran) using ShipX and VERES motions analysis tools in specific oceanic conditions for a CCDOTT project.
- Developed and designed a Ro/Ro-type cargo ship for a short sea shipping CCDOTT project.
- Aided in setting up a computer ship model (HSSL), which was sent to a model manufacturer, and supported and managed the execution of model tests.
- Provided Engineering support for drawing and document validation on USCG RB-M Project.
- Performed RCM (Reliability Centered Maintenance) Analysis on USCG vessels’ mechanical systems.
- Computed power estimates and stability parameters for fireboat models.
0-5 years of experience
Served in Basic Design Group in support of conceptual design of ULCC for foreign owners and VLCC for domestic petroleum company.
- Conducted computer aided design for the first environmental friendly tanker design in Taiwan.
- Participated in the feasibility study for the establishment of national shipping fleet including tanker, bulk carrier, container ship, etc., for a South East Asian country.
- Successful in developing the first MARPOL SBT/PL tanker design and assisted the local shipyard in securing the first newbuilding contract with a major US oil company.
0-5 years of experience
[company name], LLC was founded to provide design, engineering, and consulting services directly to clients.
- Consulted on business strategy, tooling design and new boat construction at the manufacturer’s facility.
- Developed a product expansion roadmap with the builder.
- Created a manufacturing process flow for a new product line.
- Collaborated with suppliers to maximize efficiency in manufacturing while minimizing costs.
- Designed a performance center console fishing boat and the superstructure for a port security boat.
6-10 years of experience
Determined the ballasting needs for US Navy submarines and ships based on naval architectural experiments. Planned and executed naval architectural experiments such as inclining, trim drives and pier-side checks. Developed reports to document the experiments and to provide ballasting requirements.
- Led over 30 naval architectural experiments, including obtaining the joint cooperation of U.S. Naval officers, engineers and technicians, and shop workers.
- Attended and made presentations at Navy-wide naval architectural symposiums.
- Provided on-site technical guidance for docking and undocking evolutions at PSNS.
0-5 years of experience
Spent three months working on the plant line to gain knowledge of every aspect of the build process.
- Performed speed and weight prediction calculations for new production models.
- Took part in sea trials where vibration, sound, maneuvering and performance testing took place.
- Performed Trim and Stability Calculations on new construction projects.
- Spent a week at Steven’s Institute testing various design models in a tow tank.
- Assisted in preliminary layout design.
- Worked on design work of Viking 60 Convertible, 50 Convertible, 46 Convertible, 46 Open, 82 Convertible, 42 Convertible, 42 Open, 57 Convertible, 66 Convertible, 70 Convertible and 76 convertible.
6-10 years of experience
Performed structural and stability calculations in accordance with US Navy Standards
- Conducted inclining experiments and produce stability books
- Wrote operations manuals
- Estimated cost and change orders for navy ship repairs
6-10 years of experience
Ship design for technical division of U.S. Navy. Highest Grade: GS-13 / ND-IV
- Principal naval architect for USS Freedom-class Littoral Combatant Ship (LCS); oversaw technical development of $300M+ naval ship. Produced specifications and contract documentation and served as contractor liaison. Identified early signs of weight overruns that were corrected on later productions. First ship launched in 2006.
- Led group of approximately 15 scientists to investigate the hydrodynamics of hull-propulsor interactions. Produced proposal that obtained $1M+ funding from Office of Naval Research.
- Team leader for Navy-wide ship modularity study, produced internal Navy publication.
10+ years of experience
Prepared LCS Damage Control diagrams, evaluated corrosion issues and recommended design and manufacturing improvements.
- Lead Engineer for the development of the hydraulic vehicle ramp structural and operating system for the arctic ferry M/V SUSITNA (E-Craft).
- Responsible for the development, design and integration of ship systems for advanced marine vessels.
- Familiar with IMO, ABS & DNV High Speed Vessel Rules. Performed scantling selection using class rules and optimized structures using finite element modeling & analysis. Developed detailed weight estimates and updates during design and construction.
- On-site technical representative for construction of KILO MOANA (AGOR-26) SWATH Oceanographic research vessel. Project Manager for the maintenance, modification and operation of SEA SLICE test vessel to accept modular sensor, communication and weapon packages for participation if FBE-J naval experiment
- Provided development marine structural and mechanical engineering support for offshore renewable energy systems to convert wave and tidal current energy.
- As Subject Matter Expert, provide technical support for marine design projects on classification and regulatory standards and approval processes.
0-5 years of experience
- Made drawings of the hull structures according to the requirements.
- Created detailed 3D models of the vessels’ scantlings to allow the Naval Architects of the Mechanical Department and Naval Architects of the Electrical Department to simulate pipes and electrical routing to avoid interference with hull constructions.
- Counted the weight and dimensions of the metal sheets required to build the ship.
- Maintained communication with Chief Designer, Chief of Hull Department, Marine Architects of Hull Department, Marine Architects of Mechanical Department, Marine Architects of Electrical Department, and Marine Foreman.
- Prioritized work on the most important drawings.
- Checked that vessels were built per drawing requirements.
0-5 years of experience
Chair and facilitate engineering and manager design events to optimize fabrication, installation, test, to attain a reduced total cost throughout a ship’s construction and service life cycle, and meet engineering and design savings goals
- Scope, supervise, mentor and assign work to Green Belts
- Perform area based design events using design for production (DfP) and design for sustainability (DfS) principles
- Facilitated a multi disciplined conceptual design event which enabled a system description document to be modified, component engineers to challenge requirements and vendor’s capabilities and fine tuned the Design, Build and Sustain process
0-5 years of experience
- Studied engineering drafts with Lead Naval Architect to determine dock size, fittings, and repair scheduling.
- Assisted in daily duties of maintaining logs, conducting inspections on work items, and ad-hoc projects.
- Participated in floating dock project which involved the replacement of anodes of the entire dock.
0-5 years of experience
Designed complete hull and superstructure according to specifications and test data, in conformity with standards of classification societies, safety, efficiency, and economy.
- Made hydrostatics and hydrodynamics calculations.
- Modulated detailed 3D models of the vessels’ structure according to the drawings.
- Checked all the vessels structural drawings for inconsistencies and errors.
- Prepared detail CAD production drawings and material lists.
- Counted the weight and dimensions of the metal sheets required to build the ship.
- Maintained communication with Chief Designer, Chief of Hull Department, Naval Architects of Hull Department, Mechanical Department, and Electrical Department.
- Prioritized work on the most important drawings.
10+ years of experience
Provided contract and bidding technical specification.
- Developed contract and key structural drawing and general arrangement
- Developed hull form, initial propeller design and evaluation of propulsion performance, rudder and tank layout and basic hydrostatic properties calculations for oil tankers, bulk carriers, containerships and multi purpose cargo carrier.
- Witnessed ship model test in towing tank laboratory and evaluated test results of the model basin.
- Provided bidding documents for new shipbuilding tender projects.
0-5 years of experience
- Designed recovery barge for oil spill operations.
- Interfaced with manufacturers for non-sparking, non-corrosive supplies suitable for marine environments.
- Ensured that oil spill recovery equipment was transport-ready and met safety standards for applicable environment.
- Installed test instrumentation on U.S. Navy boom handling boats for bollard pull and assisted in performing open water trials.
- Licensed to operate a small forklift to move salvage materials and related equipment in the warehouse facility.
0-5 years of experience
Perform load line and freeboard calculations using in house programs and GHS.
- Review incline test results and LL11D for ABS Load Line certification.
- Check hydrostatics of vessels in compliance with current regulations.
- Verify lightship surveys and estimate weights using drawings and material lists.
- Implement and review ships for compliance with SOLAS and CFR regulations.
0-5 years of experience
- Project coordinator of a design team for several ship design projects including the detailed design of a 35 m firefighting tugboat.
- Preliminary and detailed design of ships including resistance, propulsion and stability calculations.
- Develop faired hull lines plan for lofting and construction, including a 215m long tanker with bulbous bow.
- Prepare intact and damaged stability reports for various ship types.
- Review and submit design drawings for approval to classification societies and shipyard.
- Planning and conducting inclining experiment, lightship survey and sea trials after the design ship are built.
0-5 years of experience
R&D of remote control system for high speed target boat
- Created the interior design, worked with engineering teams that created the actual projects of vessels, and suppliers that are responsible for providing the boats with the equipment needed
- Coordination of several custom-designed yachts and boats (from 45′ to 130′) from concept, CAD, 3D renderings, engineering, fabrication, installation, to final assembly
- R&D and FEA of Surface drives and water jets
- Design of AC/DC system layouts
- Offsite design work for projects of various complexity for remote clients from Russia and Ukraine
0-5 years of experience
- Oversee shipbuilding evolutions such as translations, launches, and inclining experiments
- Perform technical reviews of contractor-submitted documents and drawings
- Ensure hurricane preparedness of vessels
- Ensure proper hydrostatic loading and stability of vessels
- Perform ballast evolutions during LPD-17 class trials
0-5 years of experience
Fully integrated time domain dynamic analysis of the jacket lifting with the DP class heavy lifting vessel
- Dynamic positioning capability verification of the HLV
- Jacket and topside transportation analyses, including frequency domain motion analysis, stability and longitudinal strength verification and bollard pull estimation
- Dynamic floatover analysis of the topside including LMU and DSU design, development of ballasting plans, mating and mooring analysis
- Offshore support as a ballasting supervisor for the jacket lifting and the topside floatover operations
0-5 years of experience
Prepared stability calculations for US Navy Destroyers, Guided Missile Cruisers, and commercial barge loading and towing projects
- Prepared calculations for mooring vessels pierside at US Government contractor facilities
- Prepared blocking arrangement plans for drydocking various vessels at contractor facilities
- Designed cofferdams for Government contractors’ projects
- Fieldwork includes lightweight, tank and underwater hull surveys
0-5 years of experience
Detailed structural design – scantlings calculations, first principle, end connections, etc including FEA
- Experienced in stability analyses, incline tests, speed power calculations and sea trials
- Lead of field test program of Multipurpose Light Construction vessel subsea loadout trials
- Special projects – Arctic loadout /ballast planning, side launch pass/fail analysis
- Lead of anti-roll tank design and tuning, sloshing studies for tanks, and seakeeping analyses
- Use of equipment selection matrices
- Specification development in-charge for RFQ for purchase of seakeeping analyses software
0-5 years of experience
Experience with Nastran Software (Finite Element Analysis Software)
- Designed platform structure for aircraft carrier using Nastran Software
- Platform had to withstand dead load, live load, wave splash, and shock
- Used AutoCAD to convert the 3D model of platform to a 2D drawing
- Performed onsite ship checks of aircraft carrier to verify proper installation of new design projects
- Evaluated a naval ship’s structural integrity and reported deficiencies to the Navy
- Analyzed and photographed corroded structure throughout the ship and organized into a report
- Performed onsite evaluation of submarine structural damage and deficiencies
- Utilized as-built drawings of submarine to evaluate and locate damaged ship structure
- Wrote work technical documents to properly repair damaged submarine structure
0-5 years of experience
Responsible for coordination between System Integrator and the Design Agent, utilizing project mgmt to realize program goals, weight control efforts, mass properties calculation, and reporting.
- Tracked Littoral Combat Ship weight configuration for PSA-1
- Developed weight estimates for design changes
- Developed design solutions for ship issues
0-5 years of experience
- Performed HM&E Hull, Mechanical and Electrical design and production scheduling
- Provided mechanical engineering and Naval architect technical support to Sup Ship Gulf Coast (SSGC) and NAVSEA PMS377 for administration and execution of LHD 8 Hull, Mechanical & Electrical (HM&E) and C4I contractual documentation including contract drawings, contract specifications, Technical Purchase Requisition Statement of Work (TPRSOW), CDRL reviews/questions, and test issues.
- Reviewed detail design products such as new design drawings and other drawings for new spaces, SPAWAR, TCIP, C4ISR, structural foundations, calculations, purchase descriptions, logistics plans/documentation and test criteria/procedures, specifically in the HM&E area.
- Provided recommendations to Sup Ship and NAVSEA on evolving issues.
- Provided Engineering and programmatic support to Sup Ship and NAVSEA PMS377 Integrated Product Teams (IPT) relative to LHD 8 design issues and documentation.
- Participated as part of the SSGC/PMS377 LHD 8 Critical Design Review Team prior to the LHD 8 Design/Construction Contract.
- Provided program support to Omni Management on various contractual and technical issues.
- Member of SSGC Underwater Hull Inspection team to resolve hull damages from welding, dry-docking and corrosion, unpainted areas and dry docking block slippage. LHD 8 inspection report with comments and noted ship check interferences provided to SSGC.
- Utilized AutoCAD 2000 & 2005.
0-5 years of experience
- Performed careful engineering calculations to predict ship and barge motions
- Station keeping analyses of oil spill response platforms
- Mooring line fatigue on drilling platforms and floating offshore wind turbines
- Computer programmer on POWERSEA program (high speed planing craft simulator) for Office of Naval Research contract (2011)
0-5 years of experience
- Successful completion of structural modification of King Post and Deck Structure assembly for special type vessel Cape Ray by using NEi-Nastran (v 9.2) and Femap (v 10.2). The objective of this conversion project was to modify the stern hull structure to support the new loads coming by installation of King Post and WT doors. ABS approved this design (July 2010).
- Completion of cargo securing specifications for barges which included stability calculations for both symmetrical and unsymmetrical barges, deck strength calculations, cargo lashing calculations, general arrangement plan & preparation of Cargo Securing Manual report.
- Feasibility study to convert an old drill barge for Caspian offshore operations. The major part of this work was to size side pontoons to reduce the operational draft, ice strengthening and scantling calculations using ABS rules and regulations.
0-5 years of experience
Created hydrostatic models for mobile offshore drilling units
- Prepared tank characteristic tables
- Intact and damage stability analysis with analytical wind calculations
- Section modulus calculations
- Prepared an onboard loading program for a 79.9 MW combined cycle power barge (220’x100’x16′)
- Weight estimation
- Reviewed a strength and stability report for a double skin unmanned tank barge (275.3’x54’x15′)
- Wind overturning moment calculations
- Reviewed the effect of a larger helideck on stability
0-5 years of experience
- Coordinate engineering and production activities in the shipyard.
- Responsible for structural analysis, stability analysis, outfit design and design verification of new build vessels and conversion projects.
- Interfacing with classification societies, regulatory and government bodies.
- Develop in-house programs for ship scantlings, and structural analysis.
0-5 years of experience
Work Description
- Create Auto-CAD drawings and 3D modeling from offsets
- Perform Maxsurf and Hydromax calculations
- Check loading and buoyancy distributions
0-5 years of experience
- Lead engineer for providing engineering support of barge shipment operations for hull modules in excess of 1000 tons, sub-modules, and equipment in the construction process of Virginia Class nuclear submarines.
- Responsible for determining optimum cargo layout and ballasting arrangement for adequate barge static and dynamic stability and shipyard operational limitations, as well as designing cargo restraints.
- Responsible for providing on-site direction to tradesmen during loading and off-loading of barge as well as coordinating these operations with other engineering personnel.
0-5 years of experience
Perform ship stability analyses
- Ship member sizing calculations
- Ship structural design
- Salvage technician for marine salvage operations
Architecture Cover Letter Examples
Rate This Article
[Naval Architect]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
