- Featured in:
-
More Helicopter Mechanic Resumes
Use these Helicopter Mechanic samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Aviation Resume Samples
Helicopter Mechanic Resume Samples
No results found
0-5 years of experience
Coordinated with multiple personnel in a work center supervisor position to oversee proper and timely maintenance was performed.
- Conducted quality Maintenance on aircraft in extremely hazardous environments during poor conditions with very little to no supervision.
- Managed the squadrons’ hazardous material and hazardous waste program and served as the squadrons’ representative for environmental issues.
- Directly supervised and trained over 20 personnel on military standards and maintenance procedures.
- Preform daily and turn around inspections on $26.2M aircraft in order to maintain aircraft airworthiness.
- Operated various tools and ground support equipment while preforming quality maintenance in accordance with publications in high stress, and time critical environments.
0-5 years of experience
Managed $102M+ in classified equipment vital to national security and the safety of 6 employees; resulted in zero losses, and the integrity of all classified materials
- Operated UH-60 Blackhawk repairs; performed scheduled and unscheduled maintenance to over 200 helicopters; conducted pre and post-flight inspections
- Managed, read and interpreted technical manuals; maintained repair logs; documented all preventative and corrective aircraft maintenance
- Conducted routine inspections; examined and inspected aircraft components to include landing gear, hydraulic systems an deices to locate cracks, beaks and leaks
- Maintained, repaired and rebuilt aircraft structures, functional components, rigging, hydraulic units, fuel systems, gaskets and seals
- Replaced or repaired worn, defective or damaged components using hand tools, gauges and testing equipment
6-10 years of experience
Assisted in the repairs on the AH64D/E Attack Helicopter by using special tools and replacing major and minor components.
- Performed periodic and special inspection on the AH64D/E aircraft systems.
- Completed and updated aircraft logbook forms and records.
- Hand selected to assist as a Production Control Clerk due to organizational skills and communication skills.
- Depended on to complete numerous tasks while running a night shift.
- Was hand selected to work as an Administrative Assistant to manage personnel files and administrative data on over 300 employees.
0-5 years of experience
Managed, mentored, counseled and trained 37 helicopter repairers, supervising scheduled and unscheduled maintenance on 8 UH-60 Helicopters
- Oversaw & maintained safety and cleanliness of a 4 bay helicopter maintenance hangar
- Supervised a tool room with more than $2million in special aviation tools
- Directed a 18 person helicopter transfer team that safely relocated 16 helicopters via C-17 Aircraft, valued in excess of $74 Million
- Flew on aircraft and made necessary in-flight adjustments and corrections. Reinstall repaired or replacement parts using common and special aviation tools
0-5 years of experience
Performed overall safety and maintenance inspections allocated by Boeing specifications to ensure safe operation of aircraft
- In charge of tracking and keeping inventory of my assigned disassembled aircraft in transport to and from Afghanistan; 37.5 million dollar Chinook helicopter
- Supervised maintenance projects to include replacing flight critical components, locating specific parts, and ensuring the proper tracking and installation
- Directed flight operations, emergency procedures, and logging of personnel and cargo
- Knowledge of principles and methods for transporting materials by air
- Facilitated the management of personal effects operations including recovery, inventory, storage, planning, transportation and deadline compliance with all standard regulations for transportation to and from a hostile territory-Afghanistan
- Coordinated pickup, delivery and distribution of multi-million dollar aircraft parts and ensured all required documentation was provided to respective personnel in the process
- Tracked work order status, identified constraints and implemented changes to maintain scheduling effectiveness, inventory tracking mandates, and expedite maintenance processes
10+ years of experience
Performed scheduled/unscheduled maintenance, repairs, and crash recovery for UH-IH and primarily on UH-60 Blackhawk and MH-60K Aircraft for 160th Special Operations Aviation Regiment (ABN)
- Supervised, trained, and oversaw performances of up to 400 personnel and evaluated their work, offering guidance and counseling.
- Provided instruction in the field and classroom through the use of computers and PowerPoint presentations.
- Ensured adequacy of equipment and parts inventory and handled purchasing, warehousing, HAZMAT, and security. Safety Manager/Risk Manager.
- Appointed to position of Unit Tax Advisor
0-5 years of experience
Collateral Duty Inspector in the Flightline, Phase Crew, and Corrosion Control shops
- Directly responsible for the safe repair and proper operation of U.S. aircraft
- Supervised and inspected maintenance to ensure proper performance techniques and safety protocol
- Performed pre-flight safety inspections improving mission readiness
- Administratively and personally supervised all phase maintenance performed by the squadron and supporting civilian companies
- Provided instruction and qualification for newly assigned personnel
- Responsible for the development and implementation of written and oral examinations for prospective inspectors
- Scheduled and organized periodic on the job training
6-10 years of experience
Preformed five years of incident free UH-60A&L maintenance experience to include GE700 series engines, flight control systems, main/tail rotor track and balance, and main/tail landing gear systems
- Completed AMCOM approved aircraft rotor rigging training
- Conducted 850 hours of aircrew duties, 750 hours of which were performed in a hostile environment
- Led a team of mechanics in the on schedule completion of three overhauls of UH-60, to standard
- Led a shift of UH-60 mechanics during hostile training exercises, maintaining an Operations Rate of over 99 percent
0-5 years of experience
- Analyzed parts to determine whether discrepancies were part of U.S. Government or foreign contract. If not, would create work order, sell directly to the customer, input all applicable data into SAP program and Solumina program.
- Worked directly with process engineers in order to reconfigure SAP program to workable status.
- Updated and maintained financial status reports for assembly shop.
- Repaired electrical mechanical and composite components for UH-60-A to UH-60-L program.
- Instrumental in selling over $1 million dollars in o and a’s (discrepancies that were not covered under the statement of work job scope) within 4.5 days in order to accommodate the Columbian foreign government to be able to reach their quota. All o and a’s needed to be verifiable and legitimate for this program and reviewed by their army generals as well as their congress.
0-5 years of experience
- Instructed, mentored and certified more than 40 CH-53E helicopter mechanics annually to maintain, troubleshoot and repair $35 million aircraft.
- Maintained all training aircraft and equipment on a daily basis.
- Obtained the highest qualification as a Master Training Specialist responsible for the training and certification of new instructors.
0-5 years of experience
Rotor Systems and Drive Systems Specialist
- Repaired, inspected, and maintained UH-60, AH-64, and CH-47 helicopter and sub-systems
- Completed non-destructive inspections of all helicopters parts through means of X-ray, Ultrasound, Eddy Current, Magnetic Particle, and Fluorescent Penetrate
- Guarded training sites, equipment, and senior leadership
- Trained new military personnel in helicopter maintenance and responsibilities as a soldier
6-10 years of experience
- Supervised and performed scheduled and unscheduled helicopter maintenance on the H-60.
- Performed technical troubleshooting during high tempo flight operations onboard Naval Aircraft Carrier and on land.
- Performed Flight Line maintenance, to include servicing, troubleshooting, and removal and replacement of failed components and other safety of flight items.
- Performed flight tests on the HH-60H and SH-60F
- Supervised and inspected government contractor work to verify compliance with Navy/Marine Corp aviation guidelines. Acted as a quality assurance representative overseeing maintenance on over 20 different type/model/series aircraft to include the H-60.
0-5 years of experience
Responsible for maintaining both scheduled and unscheduled maintenance on the AH-64 Apache helicopters
- As a phase team member, ensured that work was conducted per AH-64 Apache maintenance manual
- Responsible for maintaining up to date aircraft logbooks
- Maintained line maintenance on AH-64
0-5 years of experience
Conducted scheduled and unscheduled maintenance on CH-47 helicopter.
- Overseen the performance of scheduled and special inspections.
- Experience performing phase maintenance.
- Accomplished at troubleshooting mechanical, electrical and hydraulic systems.
- Performed aircraft tear down for transport.
- Conducted unscheduled and scheduled maintenance on UH-60 helicopter.
- Prepared forms and records related to aircraft maintenance.
0-5 years of experience
Collaborated with artisans, Naval Aviation Depot (NADEP) aircraft mechanics, sheet metal mechanics, electricians, electrical and environmental (E&E), aviation safety inspectors (ASI), and quality assurance inspectors to maintain aircraft.
- Evaluated aircraft and component issues; determined most feasible and efficient repair methods.
- Identified processes and necessary materials utilizing airframes changes/bulletins (AFC/AFB), blueprints, technical manuals, local engineering specifications (LES), local process specifications (LPS), 3Rs, engineering drawings, and illustrated parts breakdowns.
- Disassembled and assembled aircraft; inspected, adjusted, tested, and installed aircraft components.
0-5 years of experience
Conducted preventative maintenance, corrective maintenance, and troubleshooting of the drive trains, power trains, flight controls, and rotor systems of the UH-1Y and AH-1W helicopters. As well as the inspection of the entire aircraft to verify safe for flight.
- Supervised and managed 50 personnel for the quality maintenance of 29 aircraft.
- Responsible for the care and upkeep of $460 million dollars of government assets.
- Received a certificate of commendation for the safe for flight inspection of 49 aircraft, while performing 110.3 worker hours resulting in a total of 849.2 mishap free flight hours in a period of 6 weeks.
- Replaced engines, gearboxes, and rotor systems, as well as many other tasks.
6-10 years of experience
Complied with Aviation Safety Action Messages, Aviation Maintenance Action Messages, Safety of Flights, and other applicable FAA and Army Aviation messages.
- Consistently inspected aircraft for airworthiness and safety.
- Performed and maintained records of aircraft weight and balance using Automated Weight and Balance System program.
- Trained and supervised personnel on field level aircraft maintenance and flight line operations.
- Performed routine inspections and unscheduled maintenance on a company of 8 helicopters.
- Serviced aircraft and aircraft components in accordance with applicable Technical Manuals.
- Removed and installed aircraft components such as engines, rotors, gearboxes, and transmissions to facilitate other maintenance or perform major inspections.
- Used competent troubleshooting abilities to repair aircraft for mission readiness.
0-5 years of experience
Served in support of Operation New Dawn and Operation Spartan Shield
- Directly responsible for maintenance operations and oversight of 10 Blackhawk helicopters
- Executed over 50 missions and accrued more than 200 accident-free flight hours in a desert environment with degraded weather conditions to include extreme temperatures, turbulence, dust and reduced visibility.
- In charge of lead crew chief duties, extensive cargo along with sensitive items, coordination with airfield arrivals/departures and passengers while executing combat air assault training, infantry troop movement and VIP support missions
- Supervised new soldiers in performing operational checks and aircraft maintenance on multiple aircraft subsystems while enforcing standard operation procedures
- Responsible for assisting pilots and crew members in all phases of mission planning, execution and after action reviews
- Ensured 100% accountability and mission ready status of all equipment, tools, flight gear and aircrafts
0-5 years of experience
Performed EMS helicopter maintenance (scheduled & unscheduled) on Airbus BK117 B-1, BK117 B-2 & AS350 B-2 airframes under FAA Part 135 and Part 91 certificates.
- Approved aircraft for Return to Service.
- Performed maintenance and inspections I/A/W Airbus BK117 B-1, BK117 B-2 & AS350 B-2 Maintenance & Parts manuals, Lycoming & Turbomecca Engine manuals, AAIP inspection system, applicable STC’s, AD’s, ASB’s, Engineering Orders, Information Notices, MEL list and company GMM / GOM manuals.
- Maintained RAMCO, aircraft logbook and reviewed aircraft status sheets on a daily basis.
- Performed 600hr Inspections on Airbus AS350 airframes.
- Proficient with BK117 main rotor track & balance and tail rotor balancing.
0-5 years of experience
Maintains UH-60 helicopter on a daily basis, at an AVIM Intermediate Aviation Unit Level Maintenance Facility – regularly troubleshoots mid-air problems in aircraft with pilot
- Generates detailed logs on specific maintenance actions such as preventative maintenance daily (PMD) checks
- 100% accident-free work history with no safety violations during entire tour
- Performs all computer generated maintenance checks on time and with proficiency
- Monitors updates and publications for any recall notices – keeps up-to-date on maintenance procedures
10+ years of experience
- Maintenance Flight Superintendent, led 156 personnel performing maintenance on 54 F-15C/D, 15 KC-135, 2 E-3, 1 RC-135, 12 MC-130 and 10 HH-60 aircraft. Managed eight work centers performing throttle, pressurization, flight control and landing gear repair, rigging and operational checks, wheel and tire build-up and Transient maintenance services for more than 2,500 aircraft. Managed base Crash Recovery Program and ensures equipment and personnel availability to respond to all ground and in-flight emergencies within the Kadena AB. Responsible for $1.1 million in assets. Leads Quality Air Force improvement initiatives.
- Section Chief, Managed 12 maintenance personnel in performing phase inspections on 10 aircraft valued at $158M. Enforced strict adherence to technical data. Performed production, supervisory and maintenance staff functions.
- Flight line expediter directed coordinated, scheduled and unscheduled maintenance on 10 HH-60 Helicopter. Monitored and Supervised 30 personnel on assigned aircraft and coordinates job starts and completions to ensure full utilization. Directed technicians and mechanics in disassembly, inspection, repair, reassemble, testing, and modifying aircraft systems, components, and related support equipment. Inspected and evaluated maintenance activities for quality of work.
- Helicopter Crew Chief, adhered to and comply with technical data and management procedures. Ensured aerospace equipment forms completed, accurate, accomplished. Ensured timely corrective action is taken on delayed and deferred discrepancies. Coordinated to accomplish scheduled and unscheduled maintenance. Performed ground handling, servicing, basic post-flight, pre-flight, thru-flight, home station checks, phase and ISO inspections, acceptance and transfer inspections, special inspections, maintenance ground test, corrosion control, wash, lubrication, and maintenance and modification preparations as applicable on their aircraft. Performed engine operations. Ensured replacement parts were requisitioned and documentation is completed.
- Helicopter Maintenance Instructor, (Spanish bilingual) taught helicopter maintenance course at Lackland AFB to Latin American Forces, helicopter power plant main/tail rotor , power train, flight control and landing gear systems. Taught T-53-1-13B Engine systems and components.
- Environmental Safety and Occupational Health Compliance Assessment Manager, Informed educated squadron personnel on ESOHCAMP inspections, perform pre-inspections to prepare shops for assessment’s, performed ESOHCAMP assessor duties, brief command on any preliminary findings.
- Squadron Facility Manager, responsible for care, custody of assigned real property in accordance with directives. Conducted inspections of heating and air conditioning, windows, doors, lights and plumbing. Briefed facility users on their collective responsibilities for care/custody. Scheduled routine maintenance Via Civil Engineering. Notify occupants of poor housekeeping and insure correction.
0-5 years of experience
- Conducted 18 500 hour inspections a year with 100% accuracy.
- Managed and inventoried tool room of $3M with 100% accountability and zero losses.
- Implemented standard operating procedures for the tool room and assured all 25 co-workers followed the entirety of the procedures.
0-5 years of experience
Collaborated with artisans, Naval Aviation Depot (NADEP) aircraft mechanics, sheet metal mechanics, electricians, electrical and environmental (E&E), aviation safety inspectors (ASI), and quality assurance inspectors to maintain aircraft.
- Evaluated aircraft and component issues; determined most feasible and efficient repair methods.
- Identified processes and necessary materials utilizing airframes changes/bulletins (AFC/AFB), blueprints, technical manuals, local engineering specifications (LES), local process specifications (LPS), 3Rs, engineering drawings, and illustrated parts breakdowns.
- Disassembled and assembled aircraft; inspected, adjusted, tested, and installed aircraft components.
6-10 years of experience
Effectively led teams with various diversities in very stressful situations, while enforcing policies and procedures of the [company name].
- Provided employees with guidance in handling difficult and complex situations, and in resolving
- Identified and analyzed problems along with gathering information and recognizing resources needed to meet our mission goals.
- Instructed employee training activities, counseled soldiers monthly while managing employee conflicts and delegating responsibilities.
- Quickly adapted to an extremely fast paced environment without prior experience.
- Managed and maintained Executives’ heavy calendars and schedules with precision.
- Coordinated and set up high-level conference calls, board and management meetings,
- Acted as a liaison and maintained open lines of communication among stateside and deployed
- Researched, compiled, and prepared reports, correspondence, and other information required by management and other government agencies.
- Maintained records relating to inventory, incoming and outgoing personnel, employee deployment
0-5 years of experience
Removed and installed aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, and mechanical flight controls.
- Serviced and lubricated aircraft and subsystems.
- Performed basic aircraft inspections and repairs.
- Ensured that all work accomplished met quality standards and specifications.
- Assisted with the movement of aircraft.
- Properly completed all required paperwork in a timely manner.
- Prepared aircraft for and performed inspections and maintenance checks.
- Assisted in diagnosing and troubleshooting of aircraft.
- Properly identified aircraft parts and components with the proper tags
10+ years of experience
Maintenance of Bell 206 series, BK-117, AS-350, BO-105 and Sikorsky S-58 series helicopters
- Maintenance of Piper Chieftain fixed wing aircraft
- Conducted independent pre-purchase helicopter inspections for third party companies
- Assisted with start-up and standardization of new bases
6-10 years of experience
Oversaw all documents & records for over one hundred and fifty personnel
- Facilitated duties to a team of personnel in excess of twenty-five
- Coordinated schedules & correspondence for Upper Management
- Administered & developed a system of organization for more enhanced use of workspace
- Envisioned, developed, and implemented a successful tracking systems for paperwork
- Developed filing systems
- Co-facilitated and conducted weekly training meetings
- Conveyed all correspondence within office assignments, requirements, and impromptu personnel matters
- Performed under extremely stressful situations & deadlines ensuring personal and team safety without incident while deployed in a warzone
0-5 years of experience
- Assisted in twelve downed aircraft recoveries while deployed to Operation Enduring Freedom 1
- Accomplished a total of 15 aircraft phases on the CH-47D model helicopters
- Assisted in Aircraft sling load recovery operations
- Assigned as a contact team leader for a total of 5 personnel for quick release force
- Supervised multiple aircraft phase inspections on the CH-47D model helicopters
0-5 years of experience
Maintain a fleet of UH-60 Blackhawks: including dailies to annual inspections, phase inspections, safety checks
- Certified and trained with the Goodrich hoist systems with experience in installation, inspection, service, repair and removal
- Trained and Certified on FLIR systems with experience in installation, inspection, service, repair and removal of the side mounted STARSAFIRE II FLIR system
- Experience in BambiBucket inspection and repair
- Affirm a clean work environment, situational awareness, highly detailed yet efficient work ethic, accurately recording and keeping maintenance log books
- Trained on Zephyer hoist servicing GSE
0-5 years of experience
Inspected and maintained airframe, power plant, and aircraft components: performed duties related to flight line operations.
- Performed Plane Captain Functions on AH-1W and UH-1N helicopters.
- Performed CDI, and Quality Assurance responsibilities, including technical troubleshooting and shift supervisor functions.
- Operated and maintained special shop and ground handling equipment.
0-5 years of experience
- Supervised three personnel on night shift maintenance team, maintaining aircraft without incident.
- Maintained accountability of company Tool Room valued at $25 million.
- Conducted scheduled and unscheduled maintenance on 10 aircraft in a hostile environment.
0-5 years of experience
Collateral Duty Inspector for work center. Quality control.
- Clarified and revamped many work center programs needed for training and daily productivity.
- Administered training sessions for work center Marines.
- Mentored 4 individuals and supervised performances of 45 plus Marines.
0-5 years of experience
Led and trained Marines in personal and professional development.
- Attained CDI qualification (Level 3 Maintenance) as a junior ranking Marine.
- Continuously assisted in increased standards squadron wide following audits and inspections.
- Contributed to reduction in man hours and increased mission capabilities by repairing aircraft and training others to do so effectively with minimal parts usage, and time consumption.
- Directly supervised and inspected aircraft repairs and training in accordance with publications and standards.
- Completed 3 tours of duty overseas in Iraq.
- Acquired various certifications and skills.
0-5 years of experience
- Collateral Duty Maintenance Inspector, and Shop Supervisor
- Recognized and awarded for work ethic and attention to detail
- Part of HMM-265, Marine Corps Squadron of the Year 2009
- Trained roughly 20 mechanics to be proficient maintainers and 4 Collateral Duty Inspectors
- Supported flight operations on Navy Ship countless times, rated one of the most time strict, dangerous, and demanding jobs in the military
0-5 years of experience
Maintained aircraft, ensured safe for flight
- Supervised maintenance actions and coordinated between actions multiple divisions
- Ordered supplies and tools from vendors
- Trained and counseled new Marines
- Completed Recruit Training and a foreign deployment
0-5 years of experience
Performs A&P maintenance on Bell 206L-1 and L-3 and Eurocopter 130B4 AS350B3 EC130T2 model helicopters
- Performs line maintenance and daily inspections
- Incremental and annual inspections
- Experienced with fuel systems and tailboom & components
- Work includes government contract with National Park Service in support of wildland fire-fighting and med-evac
- Fast-paced, quick turn-around, high-volume helicopter touring company
- Fleet of 20+ helicopters – late model Eurocopters and aging Bell 206s
0-5 years of experience
Performs reset inspection on Black Hawk Helicopters to include cleaning, trouble shooting and rigging of flight controls.
- Fabricated and installed parts for electronic subsystem installations in military systems such as fixed and rotary wing aircraft.
- Facilitated customer satisfaction by providing thorough post-maintenance test flight operations.
- Disassembled, cleaned, inspected, and reassembled struts, brake assemblies, and rotor blade dampers.
0-5 years of experience
Employed as an Aircraft mechanic on a UH-60 series RESET team at Ft. Campbell, KY.
- UH-60 series models worked on included 60A, L and M.
- Conducted extensive cleaning and corrosion control techniques on the UH-60 series helicopter.
- Performed detailed inspections on helicopter systems, components and sub-components.
- Replaced or repaired parts and components as required.
- Primary areas of responsibility were the main module transmission, flight control system, hydraulics systems and flight control rigging procedures.
- Responsible for recording all maintenance procedural data using the Army ULLSA (E) computer system.
- Provided flight line maintenance support during the power on and ground run phase of maintenance test flights.
- Used diagnostic test procedures and equipment to troubleshoot aircraft system malfunctions.
- Ordered replacement parts and components.
- Prepared faulty components and parts for turn in through the Army supply system.
10+ years of experience
Supervised 50 personnel in all safety and instructed on aircraft maintenance procedures
- Conducted Scheduled/Unscheduled maintenance, downed aircraft recovery of AH-64E/D/A helicopters
- Complete 500/ 250 hour overhaul and inspection of AH-64 Apache helicopters
- Foreign Object Debris (FOD) coordinator and facilitator
- Conducted precision measurement tolerance inspections on multiple aircraft components
- Corrosion control inspections and applications to prolong mission capable aircraft
6-10 years of experience
Oversee activities directly related to making products or providing services.
- Manage staff, preparing work schedules and assigning specific duties.
- Designate maintenance tasks to subordinate personnel
- Performed operation checklists for Ground Support Equipment
- Ensured accurate communication of personnel during shift change
- Vigilant participation in safety drills
- Coordinated respiratory mask fittings for personnel
0-5 years of experience
- Perform scheduled and unscheduled maintenance on military aircraft, OH58D, UH60A/L, and CH47F as a part of an OCONUS Field Team with L3 Vertex ([company name].).
- Work as a team to ensure the safe delivery of timely and quality products to the Military.
- Comply with a complex legal and regulatory structure governing overseas expatriates and U.S. government contractors, in compliance with UCMJ and Federal Guidelines.
- Work under current ISO Quality Standards and appropriate Safety/Quality Requirements as established in conjunction with L3 Vertex and U.S. Military Guidelines/Procedures.
- Strive to comply with OSHA and EH&S International Standards.
- Worked in austere environments in Iraq and Afghanistan, with minimal provisions while delivering quality products within a highly technical and security sensitive field.
0-5 years of experience
Performed heavy overhaul maintenance on 5 UH-60 (Sikorsky S-70) helicopters
- Performed line maintenance on CH-47, OH-58, UH-1 helicopters
- Assisted in minor sheet metal repairs such as floor repairs, skin repairs, and blade repairs
- Assisted in minor electrical repairs such as wire repair, and component trouble shooting
- Performed maintenance on Ground Support Equipment such as Tugs, Stands (various sizes), and Platforms
6-10 years of experience
- Performed the highest quality maintenance on 10 HH-60 for Pacific’s sole Combat Search and Rescue (CSAR) helicopter maintenance unit (HMU)
- Expertise in Function Check Flights and Repairs at home and deployed
- Supervised and Mentored Airmen and Peer Non-Commissioned Officers
- Fabricated Aircraft Battle Damage Repair kit via reutilized materials in deployed environment and used kit on austere location downed aircraft
- Adept in Troubleshooting Hydraulics, Pneumatics, Mechanical, Electrical
- Managed, Planned, Designed 17 Programs for the Command Staff
- Directly executed training program for maintenance squadron of 500
0-5 years of experience
Preformed reset maintenance on CH-47D and UH-60 helicopters.
- Maintained Ground Support Equipment, tugs, forklifts, gators, mules, wash carts, nitrogen carts, golf carts.
- Inspected Special Tools and worked in Tool Room.
- Handled and was proficient working with Hazardous Materials.
- Worked as the Fuel System and Landing Gear expert.
- Completed Track and Balances after completion of reset maintenance.
- Repaired hydraulic systems on CH-47D.
- Did composite material repairs.
6-10 years of experience
UH-1H & UH-1V )/ Flight Engineer (CH-47D Helicopter)
- CH-47D mechanic/repairer
- Deployed to Iraq in 2004-2005
- Works on 12 Chinooks / also a fully qualified flight engineer
- TAD to 160th (SOAR) for special operations in support of Iraqi Freedom
- Maintained two Huey Helicopters for Camp Shelby Medivac; UH-1H & UH-1V
Helicopter Mechanic Duties and Responsibilities
While a helicopter mechanic’s duties and responsibilities are determined by the type of helicopters they maintain and the specific hangar they work in, there are many core tasks associated with the role. Based on our analysis of the position, these include:
Inspect Helicopters Regularly The bulk of a helicopter mechanic’s time is spent performing regular inspections on all the helicopters in their hangar. These inspections are performed slowly and methodically, and helicopter mechanics are often required to follow specific inspection regulations.
Troubleshoot and Diagnose Potential Problems As helicopter mechanics identify potential problems, they perform troubleshooting and diagnosis processes to narrow down their causes. These processes often include following specific, step-by-step actions and using specialized tools.
Perform Necessary Maintenance After problems have been diagnosed, helicopter mechanics perform the necessary repairs to correct them. This needs to be done in a timely manner so helicopters aren’t grounded for too long. Helicopter mechanics are also responsible for performing scheduled maintenance such as oil changes.
Communicate with Pilots Helicopter mechanics communicate often with helicopter pilots to learn how well the helicopter is performing. Pilots also notify mechanics of problems they encounter during their flights, and mechanics start troubleshooting immediately.
Make Retirement Recommendations After a certain amount of time flying, a helicopter needs to be retired for safety reasons. Helicopter mechanics are responsible for making these recommendations based on previous maintenance, repairs, and flight time.
Helicopter Mechanic Skills and Qualifications
Helicopter mechanics are technically and mechanically minded individuals. They understand the intricacies of engines and aviation. Employers look to hire candidates who possess the following skills and qualifications:
- Previous aviation experience – helicopter mechanics are knowledgeable in their field, and they possess at least some experience working on aircraft in previous positions. This can include planes, but most employers prefer previous helicopter mechanic experience
- Previous mechanic experience – experience working on any kind of mechanical engine is always helpful. All engines function on the same basic premise, and candidates who already have mechanic experience can learn new skills
- Troubleshooting – helicopter mechanics are skilled troubleshooters and know how to methodically approach a problem to identify its source
- Critical thinking – helicopter mechanics can think about the big picture and identify how problems in one area may affect the entire helicopter. They also know how to pay close attention to details
- Communication skills – taking care of a helicopter is more than a one-person job. Helicopter mechanics need to constantly communicate with pilots, other mechanics, and hangar managers to ensure everyone is aware of performed maintenance
Helicopter Mechanic Education and Training
Helicopter mechanics must undergo extensive training as required by the Federal Aviation Association (FAA). This includes certification courses, which must be completed successfully before becoming a helicopter mechanic. Training typically includes a full 18 months of practical experience and attendance at an FAA-approved Aviation Maintenance Technician program. Once on the job, helicopter mechanics may undergo additional training so they become familiar with the specific helicopters at the hangar where they work.
Helicopter Mechanic Salary and Outlook
According to the Bureau of Labor Statistics (BLS), helicopter mechanics fall under the aviation mechanics and category. Employees in this category can expect to make an average yearly salary of $63,000. Those with more experience can earn more, making upward of $93,000 per year. Those just starting out can expect to earn a little less, making around $36,000 per year. Helicopter mechanics are typically eligible to receive benefits from their employers, including health insurance and paid time off. The BLS reports that this industry can expect to experience job growth of 5 percent over the next 10 years, which is an average growth rate when compared to other industries. As the aviation industry continues to expand, so will the need for more mechanics.
Helpful Resources
Read through some of these helpful resources to learn more about the duties and responsibilities of helicopter mechanics:
Federal Aviation Association: Mechanics – this is the official website of the FAA, and it contains a wealth of information about aviation mechanics and the requirements to become one. This is a great starting place for anyone new to the industry. You can find information here about certifications, safety advisories, and regulations and policies
Aviation Professionals – this is a LinkedIn group with over 170,000 members. It’s a great place to network with other like-minded individuals. If you want to get information from someone working directly in the field, don’t hesitate to check out this helpful and friendly online networking group
Standard Aircraft Handbook for Mechanics and Technicians – this guide is a must-have for all aircraft mechanics, including helicopter mechanics. This is the book most trusted by the industry to contain up-to-date information about maintaining and repairing aircraft. It covers topics like the proper use of tools, corrosion detection, and riveting, among others
General Test Guide 2018 – this book focuses on giving you the resources you need to pass the FAA certification tests to become a certified aviation mechanic. It reviews common questions and provides practice tests with answers. This is a good resource to use while you’re getting ready for the certification exams
Rate This Article
[Helicopter Mechanic]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
