- Featured in:
-
More Aviation Mechanic Resumes
Use these Aviation Mechanic samples as a guideline or visit our extensive library of customizable best resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Aviation Resume Samples
Aviation Mechanic Resume Samples
No results found
0-5 years of experience
Facilitated maintenance for $50 million of unique and complex aircraft and aircraft parts resulting in a zero loss in a 3-year period.
- Identified complex trouble shooting skills to reduce down time for over 12 aircraft.
- Demonstrated the expert set of skills to over 500 personnel on how to succeed and adapt in a live fire exercise using fire arms.
- Mentored and trained over 15 coaches to qualify 500 personnel aboard Marine Corps Hathcock Rifle Range.
- Consistently motivated over 2,000 personnel to qualify safely during constant stress and pressure.
- Supervised and provided leadership skills to over 30 personnel resulting in a 10% increase in promotions.
0-5 years of experience
Successfully supported Cryogenic operations of eight different squadrons by supplying both liquid and gaseous nitrogen and oxygen as scheduled, and on emergency basis.
- Operated, diagnosed and repaired cryogenic equipment in accordance to military specifications.
- Operated and monitored Cryogenic Plant with little supervision
- Trained new personnel on all operations, quality controls and USMC standards.
- Maintained thirty seven storage and transfer tanks in accordance with technical and quality control publications with 100% accountability
- Devised more efficient and cost effective ways to preform daily tasks by adding a consumables locker to the building. Which cut back on maintenance and troubleshooting by half the time.
0-5 years of experience
Performed preventive, scheduled maintenance, unscheduled maintenance, and troubleshooted on various aircraft, including the Bombardier Q400, Saab 340 and Beech 1900
- Repaired aircraft components including actuators, gear components, engine, and flight controls
- Installed and removed various electrical and mechanical aircraft components
- Communicated effectively with team members and assisted in APU runs
- Run-taxi qualified on Saab 340.
0-5 years of experience
Maintained the highest standards of air conditioning, heating and cabin pressurization system
- Inspected, troubleshot and replaced components temperature and pressure control units and components of cooling system equipment
- Occasionally, conducted minor repairs of components by filing riveting and drilling from aircraft seats and the exterior and interior fuselage of the C-2A and E-2C/D aircrafts.
- Planned, organized and managed the work of subordinates under my direction
- Ensured that each worker was properly equipped with adequate tooling and parts inventoried to complete assigned tasks.
- Supervised 15 workers that conducted maintenance of 14 aircraft, associated aeronautical equipment and aircraft support equipment.
- Organized and conducted training activities for 23 workers that increased production by 25%.
- Scanned over 100 medical documents and completed certificates that were uploaded to Microsoft Excel.
- Assisted 16 workers to order viable aircraft parts and document completion through Microsoft Excel.
0-5 years of experience
- Supervised and managed a six person work center
- Participated in weekly high level discussions with senior management regarding aircraft maintenance and delegated daily mandates to my team
- Launched and recovered FA-18 aircraft
- Fueled, serviced and performed pre and post-flight inspections
- Changed defective and worn equipment
6-10 years of experience
Maintained a multimillion dollar aircraft
- Received a high and sensitive security clearance with direct participation to top secret and priority mission during war time and peace time.
- Provided a high quality of service with integrity, discipline and loyalty.
- Conducted trouble-shooting in a resourceful way without sacrificing the standard and quality.
- Acted as first line supervisor with Project Management in identifying which unit and unit’s process needs workflow automation.
- Presented a professional ethical manner. Sets and leads by example among its peers.
6-10 years of experience
Examine vital aircraft components, including landing gear, hydraulic systems, to locate problems such as leaks and cracks
- Supervised junior personnel in proper maintenance procedures and hydraulic contamination, setting the command up for future deployment readiness.
- Monitored and inspected work areas and examined tools and equipment to assure safe conditions
- Tested avionics equipment to determine performance and air readiness
- Performed scheduled maintenance assessments in a timely manner
6-10 years of experience
Review technical publications and directives to determine their applicability to the maintenance department, prepare or assist in the preparation of local command procedures and distribute recommended changes to program managers.
- Inspect and audit shop programs to ensure programs are up to date and ready for inspection. Ensure safe maintenance practices are being performed. Perform complex maintenance tasks and make qualified decisions involving “safe for flight” status of aircraft.
- Balance available resources and manpower within the work center to complete maintenance and repairs on squadron aircraft and aircraft components.
- Demonstrated skills in an extremely productive, high volume, high stressed environment
- Provided personnel management for a team of 60, while conducting maintenance operations on 20 aircraft daily
- Managed the Periodic Maintenance program
- Established record for solving problems in a timely and efficient manner
- Accounted for over $100K worth of equipment under the Embark program, conducting movements to and from Iraq
0-5 years of experience
Review technical publications and directives to determine their applicability to the maintenance department, prepare or assist in the preparation of local command procedures and distribute recommended changes to program managers.
- Inspect and audit shop programs to ensure programs are up to date and ready for inspection. Ensure safe maintenance practices are being performed. Perform complex maintenance tasks and make qualified decisions involving “safe for flight” status of aircraft.
- Balance available resources and manpower within the work center to complete maintenance and repairs on squadron aircraft and aircraft components.
- Demonstrated skills in an extremely productive, high volume, high stressed environment
- Provided personnel management for a team of 54, while conducting maintenance operations on 18 aircraft daily
- Managed the Periodic Maintenance program
0-5 years of experience
Reported on the job performance of technicians
- Maintained F14B/D Engines (110-GE-400) which included dropping and installing engines on airplanes.
- Tracked and recorded serial gearbox and engine/engine parts, updated, and maintained appropriate records for maintenance.
- Utilized safety practices and procedures.
0-5 years of experience
Worked under pressure, multi-tasked, and met tight deadlines.
- Conducted high quality training for groups up to 60 personnel.
- Operated computers and utilized the Navy’s maintenance operating system to input and access maintenance data.
- Provided counseling and corrective action plans for multiple individuals through formalized disciplinary policies.
- Managed multiple programs associated with command and maintenance policies.
- Effectively lead teams in accomplishing projects.
- Ensured maintenance was conducted safely and in a timely manner.
0-5 years of experience
Completed Basic training.
- Completed Aviation training, as well as attended Aviation mechanic school.
- Participated in Mediterranean tour of duty.
- Performed ship detail, including ship maintenance and repair, security, quality control, and ensured helicopters were secure.
6-10 years of experience
Small Unit Leader responsible for the training and mentoring of 75 military personnel
- Replace or repair worn, defective, or damaged components
- Manage supply logistics for parts and maintenance requirements
- F-18 Plane Captain: Responsible for maintenance delay prevention and participated in the repairs of different varieties of F-18 fighter jets. Received a performance rating of 100% effectiveness
10+ years of experience
Aviation Mechanic
- Tested repairs, made final adjustments for inspection, and releasing to mission-ready status.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, to locate
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other signal circuit plans and schematic electronic diagrams
0-5 years of experience
Repaired, and rebuilt rigging, hydraulic units, fuel systems, electrical systems, gaskets, seals, and engines.
- Inspected aircraft maintenance was met according to Army standards and aircrafts were operational.
- Read and interpreted maintenance manuals, service bulletins, and other specifications.
- Determined the feasibility and method of repair on various aircrafts.
- Replaced malfunctioned or damaged components as needed on aircrafts.
0-5 years of experience
Four years of military active duty service and one year Navy reserve inactive and active duty. My duties as a helicopter line maintenance and powerplant mechanic on the H-60B, H-60F, H-60H and H-3 military helicopters. I am familiar with (H-60 and H-3), maintenance manuals, blueprints and illustrated parts breakdown manuals. Used basic aircraft hand tools, specialized precision aircraft tools and calibrated tools to ensure safety of aircraft maintenance.
- Performed daily inspections, phase inspections, turn around inspections, rigging of flight controls and vibration analysis.
- Used automated computer programs Nalcomis and SAP for aircraft maintenance, discrepancies, and to accomplish tasks before deadlines.
- Qualified to remove and install subsystems, troubleshoot powerplant systems, inspect powerplant T400-GE-401C turbo shaft engines and T58 turbo shaft engines and airframe systems and structures.
0-5 years of experience
Identify, repair and replace faulty components on hydraulics systems and all movable flight control surfaces on F/A-18A+.
- Perform all scheduled maintenance on aircraft every 200 flight hours.
- Coordinate the efforts of over thirty maintenance personnel to ensure the proper inspections, modifications and safety requirements have been met and are being met on all twelve aircraft in the squadron. This includes ensuring all the proper documentation, procedures and recurring inspection requirements have been met in accordance with the Naval Aviation Maintenance Program and all associated governing policies and procedures.
- Qualified Quality Assurance Auditor
- Lean Six Sigma Greenbelt Certified
- Qualified Quality Assurance Receiver/Inspector for inspection required materials and products received at Michoud.
- Technical Writer and standing member of Policy/Procedure/Work Instructions Review Board
0-5 years of experience
- Performed Scheduled and Unscheduled Maintenance to ensure aircraft are flight worthy.
- Conducted Pre-Deployment and Post-Deployment Inspections and Repairs.
- Designated Collateral Duty Inspector for the CH-53 Airframes Division.
0-5 years of experience
Troubleshooting maintenance issues
- Repaired or replaced malfunctioning or worn mechanical components
- Created and maintained accurate flight and maintenance records
- Collaborated with staff recruiters to conceptualize and organize successful recruiting events
6-10 years of experience
Performed all scheduled and unscheduled maintenance, rigs, gearbox replacements, engine replacements, troubleshoot electrical issues, landing gear brake and tire replacements, rotor blade and paddle replacements on 25 aircraft while maintaining a 94% Operational Rate.
- Trained and supervised 25 new soldiers on how to perform proper maintenance on the aircraft.
- Preformed over 6000 maintenance hours on the UH-60A/L airframes.
- Logged over 650 flight hours of the UH-60L
0-5 years of experience
- Built the foundation of my aviation career while becoming known as a person who could be relied upon to do whatever was needed to get the job done.
- Performed 125-, 250-, and 500- hour inspections on AH-64D airframe.
- Became experienced in the removal and replacement of major aircraft components such as rotor blades, engines, transmissions, landing gear, hydraulic systems, auxiliary power units (APU), main rotor heads, windows, and blast shields.
- Familiarized and mastered the use of the general aviation mechanics toolbox, special tools, hoist, and other machinery designed to aid and assist aviation mechanics.
0-5 years of experience
Performed inspections and repairs on Bombardier Dash 8 series aircraft.
- Accomplished flight deck and passenger compartment interior modifications, repairs.
- Assisted in Quality Control functions- Auditing paperwork for Part 135
- Accomplished paperwork functions including but not limited to creating aircraft specific
0-5 years of experience
- Installed engine STC’s and fabricated interior modifications for a Cessna 172.
- Completed a full stripping and repainting of a Cessna 172H and applied vinyl graphics.
- Performed routine maintenance, such as landing gear strut rebuilds, weight and balance
6-10 years of experience
Maintained performance and pre-flight inspections on all aircraft.
- Trained new soldiers in Non Destructive Inspection techniques and protocols.
- Managed a team of 12 soldiers on deployments to maintain and repair aircraft.
- Inventory control of over $4 million worth of equipment and components.
0-5 years of experience
Performed scheduled and unscheduled maintenance and inspection of F/A-18F Super Hornet
- Maintained Environmental Control Systems such as air conditioning, pressurization, Gaseous oxygen systems, egress systems, fire detection and extinguishing systems.
- Work Center Manager managed 11 workers while up keeping 12 aircraft.
- Removed and replaced various aircraft parts and modification maintenance
- Tool Control and Foreign object damage manager
- Collateral Duty Inspector, as well as obtaining all Shop ground support qualifications
0-5 years of experience
Managed to service and repair inspect airplanes
- Responsible to upkeep of four c130 airplanes cleaned and ready to operate
- Provided leadership and supervised over 20 sailors to maintain daily routines
- Upkeep the hangar cleanliness and ready to operate.
0-5 years of experience
- Servicing, repairing, and overhauling aircraft engines to ensure air worthiness.
- Repaired or replaced defective engine parts and installed it into the aircraft.
- Maintained aircraft engines and their related systems. Preflight aircraft and conducted periodic inspections and oil analyses on engines and engine-related systems.
0-5 years of experience
Inspected new, repaired and modified aircraft to identify damage and defects and to assess airworthiness and conformance to FAA standards, using checklists, hand tools and test instruments
- Executed daily operations of testing of fuel samples: Jet A and low lead, prior to line service daily duty
- Executed daily operations of driving fuel trucks to pumping station and filling them for daily line service duties
- Examined maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals
- Examined landing gear, tires and exteriors of fuselage, wings and engines for evidence of damage and corrosion and to determine whether repairs were needed
- Examined aircraft access plates and doors for security
- Prepared and maintained detailed repair, inspection, investigation and certification records and reports
- Responded to written and telephone requests for work to be performed on air craft and avionics
0-5 years of experience
- Supervised a maintenance team, managing equipment and aircraft exceeding strict operational readiness standards under various time constraints and flight schedules.
- Performed duties as Collateral Duty Inspector and Quality Assurance of all maintenance task and inspections.
- Supervised trouble shooting procedures and maintenance training on the Bell-Boeing MV-22 Tilt-Rotor Aircraft.
- Performed duties as a program manager such as FOD prevention, safety, GSE Training, Tool Control, Corrosion Control and Fluid Contamination.
0-5 years of experience
Read layouts, blueprints, and schematics
- Supervised shop of over 30 crew members and 12 aircraft
- Troubleshoot electrical, mechanical, and fuel systems.
- Used oscilloscopes, digital meters, counters and circuit analyzers
- Conducted informal OJT/technical training
- Received certificates for training in powerplants and related systems
0-5 years of experience
Perform routine maintenance, troubleshooting, repair, inspection and testing of Rolls Royce T56-A-427 turboprop engines.
- Qualified on wing engine test operator with over 200 engine starts.
- Shift supervisor, responsible for the safety and well-being of shop personnel while ensuring that all aircraft maintenance is performed at the highest possible level and in accordance with the appropriate maintenance manuals.
- Held a Secret Security Clearance for 10 years.
- Recipient of 10 awards for exemplary performance while serving four honorable years in the [company name].
- Chosen over thousands of other maintenance technicians to assist Navy engineers in implementing more effective and efficient aircraft maintenance procedures used in maintenance manuals throughout the Navy.
- Worked as a technical writer to implement maintenance procedures for manuals used on a new gas turbine engine line.
- Chosen to work with a small group of gas turbine professionals, providing research and development for tooling and maintenance procedures of a new gas turbine engine line.
- Received Dean’s List Honors Award for maintaining a 3.73 GPA Fall 2012/Spring 2013.
6-10 years of experience
Entrusted with keeping the Aircraft in the Air while officers are entrusted with flying them
- Serviced KC-130; Arial Re-fueler & Transport Planes
- Highly trained in safety, survival & leadership
- As a Corporal; responsible for 14 Aircrafts & 7 Marines
- Participated in Iraqi Freedom
- Participated in Operation Enduring Freedom
- Combat Tour of Iraq in 2003
0-5 years of experience
Performed aircraft maintenance to include pre-flights, cleaning, installing ordinates, and support equipment
- Followed orders from Supervisor and worked in a team environment
- Read serial numbers on all aircraft components
- Installed mechanic components
- Helped organized the tool room and maintained inventory
- Handed out tools
- Stood watch in the guard house
0-5 years of experience
Serviced and repaired aircrafts (A/C) and engines to ensure airworthiness according to customer specifications and FAA standards
- Provided instructions and training regarding A/C work and company procedures and safety standards to personnel
- Removed and replaced A/C components and installed A/C engines using appropriate procedures and specifications
- Perform flight control rigging and adjusts A/C secondary systems
- Identified the structural composition of A/C
- Performed A/C lubrications, filter replacement and other preventive maintenance
- Identified and repaired all discrepancies utilizing manufacturer’s technical manuals for appropriate repair procedures
- Carried hand tools, parts, and work materials; ascends and descends ladders and platforms; and frequently works in a variety of positions such as stooping, kneeling or squatting
- Followed safety procedures and wears/uses appropriate safety equipment for the work being performed
- Prepared and maintained simple records such as work order documentation, logs, and time and material
0-5 years of experience
Used SAP logistical program to complete everyday tasks
- Contributed to a team effort to achieve a bronze achievement award for the Sky Harbor plant
- Inducted and evaluated incoming military components including oil pumps, starters, clutches, and torque converters
- Disassembled and prepared parts for analytical operations
- Operated computer to access blueprints and schematics
- Reassembled components with new parts
- Lock wired and completed final out operations after components passed the lab tests
- Worked on FOD prevention
0-5 years of experience
Assemble aircraft wings for the 777’s and 737’s using different types of rivets guns, winslow guns and different hand tools and power tools
- Perform SPC by using a Faro edge on different parts of the aircraft wings and flaps
- Use various sealants to seal wings, flats, skins, and ribs to aircraft frames
- Operate overhead cranes to move finished aircraft assemblies
- Read blueprints and following a work order
0-5 years of experience
Perform preventive maintenance, repairs, part replacement and modifications for aircrafts.
- Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customer’s approved maintenance program, approved or acceptable data.
- Troubleshoot problems, make repairs, and prepare areas for complete inspections.
- Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead.
- Follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work.
- Ensure the issued Task Card is properly scanned together before beginning the assigned task.
- Accurately and legibly record the maintenance or alteration on the proper repair station and customer supplied forms including my signature and employee number.
- Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to my supervisor
- Report any tool issues to stores and ensure the correct tag is attached and properly completed.
0-5 years of experience
Inspection, repair, and removal/reinstallation of transmission assembles, controllable swash plate, rotor head assembly, and rotor drive train assembly.
- Perform inspection, repair of rotor blade systems, and adjustments to the main rotor blade pitch control rods.
- Inspection, repair, troubleshooting, and removal/reinstallation of fuel system components, fuel cell repair, testing, and replacement.
- Hot end inspections and bore scope inspection; compressor section inspection, and cleaning; rework compressor blades, engine acceleration schedule adjustments; fuel control inspections; removal/reinstallation and rigging; fuel control and bleed band adjustments based upon technical publication specifications.
- Perform auxiliary power plant inspections; replacement and operational checks.
- Inspection, repair and removal/reinstallation of flight control linkages, flight control cables, tension check, hydraulic pumps, and complete aircraft flight control linkage rigging.
- Perform inspection of landing gear assemblies; removal, repair and reinstallation of brake assemblies, struts, and wheel assemblies.
- Perform corrosion control inspection and treatment.
0-5 years of experience
Examining and inspecting engines or other components for cracks, breaks or leaks
- Installed electrical systems, plumbing for brake lines, anti-icing and oxygen systems, mechanical & hydraulic systems such as landing gear and structural components.
- Performing 100-hour, periodic, pre-flight, post flight and other hourly inspections
- Interpreting of aircraft manuals to determine method of repair
- Servicing and maintaining aircraft systems by flushing crankcases, cleaning screens, greasing moving parts and checking brakes
0-5 years of experience
- Responsible for daily inspections of aircrafts and replacement of faulty parts
- Supported Pacific Fleet with Pacific Realm aeronautical reconnaissance missions
- Maintained rigorous work and travel schedule
10+ years of experience
- Power plants Collateral Duty Inspector. Inspected scheduled and unscheduled maintenance on 8 MH-60S as well as 7 MH-60 F/H helicopters power plants and related fuel system.
- Performed 27 phase inspections, 6 546- day inspection, 3 364 day inspections, 1 aircraft transfer, 3 aircraft acceptance inspections, 126 maintenance discrepancies, removal and replacement of 10 T-700 engines and 2 main gearboxes.
- Actively trained and qualified junior personnel in the work center, ensured qualification requirements in support of the command’s Commander, Helicopter Sea Combat Wing, U.S. Pacific Fleet Safe-to-Operate inspection.
10+ years of experience
Sheet metal/Tech. A. – Repair H60 structures, manufacture parts, and install structural modifications, field composite repairs and modifications.
- Perform aircraft structural and assembly, engines, accessories, hydraulic, control, electrical, avionic and servo systems.
- Work from engineering drawings, specifications, Engineering Order’s, and other orders as required
- Travel to various foreign countries and other states to perform aircraft repairs and structural modifications installations
0-5 years of experience
Document work perform per appropriate manuals including, but not limited to, Structural Repair Manual, Maintenance Manual and Component Maintenance Manual
- Perform inspections, making adjustments and repairs, replacing components, and correcting malfunctions or deficiencies
- Perform maintenance on aircraft in accordance with applicable technical data and FAA regulations
- Perform basic mechanical and electrical removals and installations
- Perform overhaul of aircraft
0-5 years of experience
Working on CV-22 from May 2009 until present day for Bering Strait Aerospace in service for Air force.
- Obtained 7 level assignment as part of contractor maintenance for Air force in five different AFSC’s to include: Crew Chief, Engines, Hydraulics, Fuel Systems, and environmental and electrical AFSC’s.
- Obtained 15 ton crane qualification through Air force Standards.
- Can navigate and accomplish tasks through the use of air force integrated maintenance data system (IMDS)
- Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components.
- Services and lubricates aircraft and subsystems. Prepare aircraft for inspections and maintenance checks.
- Performs scheduled inspections and assists in performing special inspections.
- Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required.
- Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment
0-5 years of experience
- Install floor panels, ceiling panels, carpet, moon mat, seats, gallies, and lavatories for Boeing 747, 757, and 777.
- Refurbish lavatories, galllies, and seats for Boeing 747, 757, and 777.
- Disassemble, reassemble, strip, clean, repair, seal with silicone, laminate outside and inside of lavatories and gallies.
- Overseas travel to other [company name] locations to fulfill customer contractual obligations.
0-5 years of experience
- In support of over 60 multi-million dollar aircrafts and millions of dollars in highly sensitive equipment
- Instruction, supervision and evaluation of over 10 personnel in the power plants shop
- Instruction, supervision and evaluation of over 50 personnel in the flight line operations shop
- Inspect, adjust, test, repair and overhaul aircraft engines and propellers
- Perform routine maintenance, prepare aircraft for flight and assist in handling aircraft on the ground
- Instruction, supervision and evaluation of over 50 personnel in the plane handler shop
0-5 years of experience
Supervision $50 million dollars worth of highly sensitive Military equipment
- Ability to communicate effectively in diverse environment
- Operate various windows based computer applications
- Able to work in stressful environment as well as meeting deadlines and prioritize work loads
- Coordinate work assignments
- Make risk decision in an elevated situation
- Supervised and evaluation of 6 personnel
- Disciplined work center
10+ years of experience
- FAA licensed mechanic/data specialist which was responsible for monitoring, repairing, testing, and final approval of mechanical components.
- Test cell supervisor responsible for 4 employees, which included training, monitoring, and final approval of all worked performed.
- Maintain test data and safety records for test cell department.
- ISO 9001 data and policy implementation team member.
Rate This Article
[Aviation Mechanic]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
