- Featured in:
-
More Controls Engineer Resumes
Use these Controls Engineer samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Looking for cover letter ideas? See our sample Controls Engineer Cover Letter.
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Electrical Engineering Resume Samples
Controls Engineer Resume Samples
No results found
0-5 years of experience
Served as electrical design specialist for all controls in company products using NEC standards.
- Successfully designed and integrated Control Logix software into waste water management equipment.
- Performed instrumentation, control testing and verification on water equipment using GE Fanuc, GE Proficy, Interact Express, Siemens 505 Workshop Factory Talk View and Allen-Bradley PLC’s.
- Organized and managed PLC/HMI programs to be accessible by the Field Technicians, Engineers and [company name] management.
0-5 years of experience
Directly responsible for the management of sub-consultants providing service to WMATA (Washington Metropolitan Area Transit Authority).
- Currently working with 36 approved ICS (Insurance Certificate Systems) sub-consultants that completed the process authorized to work on projects.
- Oversee the on-boarding, certificate of insurance compliance management, and document collection to ensure speedy delivery and execution of agreements and task orders, which reduced sub-consultant downtime and delay in payment.
- Developed a system to track outstanding sub-consultant issues in order to analyze and ensure all documents were in compliance before sub-consultants begin work.
- Performed audits on documents stored on our document controls system to verify that our Requests for Proposals (RFPs) tracker and backup documents matched
- Drafted correspondence letters between the joint venture and the client, as well as between the joint venture and the sub-consultants, such as Limited Notice to Proceed (LNTP) letters, and 80% and 100% completion letters.
- Accomplishments: Streamlined and restructured department with discrepancies in sub-consultant insurances and pertinent document. Increased compliance of sub-consultants to meet company objectives.
0-5 years of experience
Engineering support team for the GMPT I4/I5 and 3.9L Engine New and Major Project – Model Year 2004. Oversaw all plant facilities process related equipment, including Coolant Circulation and Filtration Systems for all CNC Engine Machining Cells. Worked with National Electric Code (NEC) and OSHA codes.
- Received Washington Group International Project Team Safety Award for attendance & safety compliance.
- Authored a Master Facility Power Bus Plan to facilitate & manage power distribution for the Engine Plant.
- Composed Machine Safety Plans (lockout, layout graphics, and emergency shutdown) for I4/I5 Operations to facilitate and conform to OSHA and GMPT Safety standards.
- Contributed to successful completion of two major engine projects at GMPT on-time and under budget.
0-5 years of experience
Served as Lead and focal point for project controls cost and schedule processes on assigned project teams.
- Demonstrated proficiency in baseline management, change control, trending, and Earned Value Management (EVM).
- Aided project team in developing estimates and monthly forecasts.
- Proven ability to plan, organize and implement project controls processes.
- Developed and maintained schedules primarily using Primavera 6.0 software.
- Developed and maintained various cost reports using a variety of software.
0-5 years of experience
Motion control systems design and implementation for laser-based semiconductor dicing and scribing tools.
- Developed and implemented design of motion control system for micron-level, galvo-based, high-speed laser positioning system for IC device singulation.
- Modeled system dynamics, designed and simulated single and cascade feedback loop structures, with feedforward, for 3-phase linear-motor-driven stacked/vertical stages based real-time systems
- Programmed and implemented real-time motion control loop for proprietary custom designed controller powered by a TigerSHARC DSP using C++ as well as OTS controllers, such as ACS MC4U, PMDi Polaris, and Parker ACR/ViX.
- Developed and utilized throughput analysis software for complex, multi-station wafer dicing system to select platform architecture options.
- Lead role in planning and development of next generation control system architecture for semiconductor division: defined system requirement, selected options, and evaluated solutions.
- Extensive interaction with off-site engineering teams and other business units.
10+ years of experience
Completed over 100 instrumentation and control systems projects. The range of duties included relay based systems, researching specialized technologies, writing estimates and proposals, automated assembly and packaging machinery, chemical plants, web converting equipment, and large web line applications.
- Successfully completed over 100 project assignments. No control system has ever failed to perform to expectations.
- Very broad background in controls experience, research, and education allowing new problems to be solved in an efficient manner.
- Managed projects with budgets over $1,000,000 under direct control.
- List of specific project accomplishment available on request.
0-5 years of experience
Supplier of liquefied CO2 and LNG manufacturing equipment to local and international markets for industries ranging from petrochemical, food & beverage to energy.
- Designed and implemented PLC and HMI applications.
- Conducted factory acceptance test of PLC and HMI applications, skid instruments and control panels.
- Configured computer equipment for SCADA operation using Microsoft SQL Server.
- Prepared SCADA procedures, computer setup procedures and test result reports.
- Prepared and reviewed designs for wiring, installation and configuration for field instrumentation, PLC hardware and panels.
- Provided consultation and technical support on issues relating to HMI and computer configuration.
- Utilized RSLogix 5000, FactoryTalk View Studio, KepServer Enterprise, Wonderware InTouch, Wonderware Historian, Microsoft SQL Server, Microsoft Office.
0-5 years of experience
- Turner/Gilbane Joint Venture, Fort Belvoir Community Hospital, US Army Corp of Engineers
- Senior Planner / Scheduler assigned to a 1.275 Million square feet, multi-story 120 bed in-patient community hospital and four attached clinic buildings with central utility plant, helipad and two parking garages.
- Responsible for schedule updating using Primavera P3 software.
- Developed Construction Fragments for project change orders and incorporated into project schedule logic for impact and Critical Path analysis.
- Resource loading of activities into Primavera (P3) program to identify actual and forecasted resource utilization.
- Reported and monitored actual and forecasted total project cost for engineering, procurement and construction.
0-5 years of experience
- Planned, designed, drafted, and commissioned furnaces for the steel and aluminum industry.
- Responsible for all electrical aspects of the furnaces including PLCs, Network Architecture, VFDs, Power Distribution, and Controls.
- Assisted the estimation & proposal department achieve their goal of budgeting projects down to a 5% profit margin.
- Reduced project costs by after redesigning the Material Handling and Combustion systems for a multi-million dollar Dual-Line Tunnel furnace.
- Improved the estimating & proposal process from 2 weeks to 3 days.
- Completed international commissioning milestones 2 weeks ahead of the allotted 10 week schedule.
0-5 years of experience
Before my arrival, programs had been written in Japan, I designed and developed PLC programs and electrical schematics for leading tire industry manufacturer for new and existing machinery, included the control upgrading of equipment such as extruders, banbury mixers, tire machines and conveyor systems, using US built controls. In addition, I directed and trained maintenance in troubleshooting various types of machine and also coordinated preventive maintenance in an effort to decrease machine downtime.
- Developed program, electrical schematics, and conduit schedule for $750K tire machine upgrade. Converted controls from relay logic to PLC (PLC-5/PanelView), thereby increasing troubleshooting capabilities and reducing production downtime.
- Designed and developed program (PLC-5/PanelView), and electrical schematics for a $500K Bias Cutter modification. Upgrade increased productivity and reduced ergonomic risk to operators due to control improvements.
- Collaborated in the Project Management of new Calendar Line upgrade (+10M) for existing plant.
- Directed all electrical and control installations, including developing timeline, ordering materials and supervising contractors. Completed project ahead of schedule facilitating an additional savings in man-hours and production downtime.
- Upgraded existing conveyor system program by replacing analog to digital drives. Controlled dancer bars by PI&D control from PLC.
0-5 years of experience
Managed and validated the reverse engineering of the overall stability and controls systems of the North American X-15 hypersonic research plane.
- Conducted stability analysis, stability derivative charts, and RCS (Reaction Control Syst.) weight approximation.
- Calculated and verified stability derivative of the X-15 at launch, pullout, and landing with respect to Mach Numbers.
- Determined stab. and controls cost drivers in order to maximize efficiency for a sub-orbital space tourism commercial variant of the X-15.
0-5 years of experience
Led the onsite set up and troubleshooting of products for several Fortune 100 customers. Included providing installation and start up assistance throughout North America.
- Coordinated and executed the design and programming of PLC, HMI, VFD and Servo Motion projects from hardware design and software integration throughout the construction set up.
- Managed multiple assignments simultaneously. Including reviewing project documentation and communicating with project engineers, customers, and coworkers to ensure complete understanding of process being controlled and meeting compliance requirements.
- Interfaced with engineering to resolve electrical and mechanical issues on shop floor.
- Provided electrical troubleshooting for PLC hardware and programs. Also control panels which included 480V, 120V, 24VDC, transformers, servo amps, motor starters, HMI’s, and other wiring issues.
0-5 years of experience
Produced scaled installation drawings, wiring schematics and as built drawings using AutoCAD
- Created O&M Manuals, startup procedures, test procedures and specifications for control systems
- Designed, built, installed, tested, serviced and commissioned new and existing control systems
- Trained customers on the functions of their newly installed or modified systems
- Ordered parts, completed purchase orders and tracked expenses
0-5 years of experience
Collaborated with mechanical engineers to program custom controls to improve HVAC efficiency
- Programmed control systems, developed software and assembled hardware
- Commissioned HVAC plants with new control software
- Provided training, performance monitoring and customer support for building operators and end-users
- Certified Tridium Niagara AX software development environment
- Developed new software to improve modularity and scalability
- Assembled prototype rooftop air handling unit for new software development
0-5 years of experience
Worked on the development and installation of vertical seal vertical fill packaging machinery.
- Diagnosed electrical issues with servo drives, DC power supplies, and electrical control panels.
- Optimized production processes to increase BPM (bags per minute) and reduce waste materials.
- Implemented of new production features such as Modbus/TCP multi-zone temperature controllers
0-5 years of experience
Pilz Safety Lead for an Underbody main-line for BMW in South Carolina using the F25 standard
- Commissioned the safety, ethernet, and interbus networks to come online for six systems
- Designed, commissioned and debugged logic using Pilz for six safety processors
- Worked in a team of nine engineers to develop and commission the Siemen’s logic for the six
- Participated in meetings with BMW to ensure we were on track for making deadlines and clarify
- Worked as a team to troubleshoot mechanical/electrical problems that came up along the way and found a solution to minimize downtime
0-5 years of experience
- Continuously provided software development support to GE Aviation Jet Striker Fighter F136 FADEC engine.
- Collaborated with a team to efficiently complete work projects for GE aviation in a timely manner.
- Assisted in designing and performing multiple software tests, to ensure the highest quality in FADEC engine.
0-5 years of experience
Responsible for the maintenance and troubleshooting of electrical control systems on continuous production lines including PLC, RIO, Ethernet communications, level and pressure transducers, proximity switches, laser mark up stations, chiller units, washers, conveyors, and gantries.
- Updated and optimized existing and new manufacturing electrical systems by changing hardware and programming ladder logic for Allen Bradley and Siemens PLC, HMI, setting drives parameters and calibrating instrumentation.
- In charge with working with contractors for installing and commissioning new machines for manufacturing.
- Engineered and designed electrical panels and wiring schematics utilizing AutoCAD Electrical.
- Responsible for bill of materials, cost and timing, and procuring electrical materials and contractor services.
0-5 years of experience
- Managed projects to make sure all work is completed in a timely manner without exceeding budget.
- Assisted Controls Engineer in creating wiring diagrams and network risers in Visio.
- Compiled together submittals for each project. Created commissioning reports for customer to sign off on when job was complete.
- Completed a Level 2 Technical Certification in Reliable Controls.
0-5 years of experience
- Designed and deployed control logic and diagnostics for the charge system.
- Designed and maintained control logic for Proterra’s FastFill system.
- Designed and documented electrical, mechanical and pneumatic components for building next generation charge station.
- Reduced cost by 30% per unit.
- Prepared installation and validation document for both manual and FastFill charger.
- Prepared trouble tree diagram to help diagnose on-field issue.
0-5 years of experience
Modified existing hydrogen sulfide burning process with the help of relay co-ordination techniques to avoid shutdown of the process in the event of voltage sags; received commendation from manager as instrumental player throughout project. This process was crucial to meet CARB (California Air Regulatory Board) standards.
- Developed automated standby systems to deliver power to auxiliary loads in the event of power failure.
- Supported AC-DC transfer scheme for instrumentation on the Geysers.
- Developed single line and three line diagrams using Auto-CAD for 33KW substation.
- Assisted Engineers in the design of a safe and reliable transmission system.
0-5 years of experience
- Analyzed, tracked, forecasted, and reported cost and schedule information for a $80MM+ bridge and gravel/ice road project
- Controlled costs via contract change orders, forecast communication with project team, cost coding
- Assisted team with material submittals, owner/engineer Requests for Information (RFI’s), Equipment and Personnel Mobilization Requests, material requisitions, and project execution planning
- Reported project progress, status, and changing conditions to team daily
0-5 years of experience
Designed and simulated model based software using Matlab-Simulink and autocode generation tools
- Developed CAN diagnostics and functional validation test plan and conduct tests using Peak CAN and CANalyzer
- Integrate CAN protocol (SAE J1939/ISO15765) message databases with successive software builds
- Supported OBD Team for EcoFit urea doser at Cummins Emission Solutions
- Developed diagnostics and performed DVP&R and Failure Modes and Effects Testing (FMET) for OBD Diagnostic
- Developed software to detect rationality errors for sensors on a diesel engine in order to meet OBD monitoring requirements
- Preparation of System requirements document, Tuning Guides, Parameter Ownership Matrix, Test plans, Trouble shooting document, user training documents
- Trained New Recruits and Interns for OBD, DVP&R and FMET
0-5 years of experience
Supported site commissioning of Concentrated Solar Plant (CSP) prototype in Bakersfield
- Designed SCADA screens using Wonderware System Platform
- Worked in team to design supervisory controls for full plant automation in MATLAB
- Led the effort to document and port supervisory code from MATLAB to Siemens PLC
0-5 years of experience
Programmed PLCs to monitor raw materials
- Wrote programs in to monitor and log cable specifications
- Created & revised AutoCAD drawings of electrical cabinets
- Built & tested analog circuits
- Modeled building wiring for OSHA arc flash compliance
0-5 years of experience
Daily servicing and custom scripting in Honeywell Experion and Emerson DeltaV DCS environments.
- Attended advanced courses in configuring and commissioning both DeltaV and Experion environments in a professional and standardized method.
- Programmed multiple PLC platforms including Allen Bradley RSLogix 5000 and Siemens 7.
- Experienced with Allen Bradley 1336, PowerFlex 700, and Powerflex 755 series drives and associated drive software: DriveExecutive and DriveExplorer.
- Led projects for alarm management, DCS graphics clean-up, and drive upgrades.
- Diagnosed various problems such as equipment failure, poor loop tuning, and communications problems.
0-5 years of experience
Leader and coordinator of the safety and functionality designs of highly automated process controls utilizing robots and material handling solutions. Worked closely with several engineering departments develop Electrical, PAC/PLC, and Pneumatic controls.
- Design safe equipment based on customer process requirements.
- Designs involved SCADA systems using ControlLogix5000 PLC’s, GuardLogix Safety PLC’s, Safety Relay circuits, PowerFlex VFD’s, and other custom devices.
- Developed safety control designs to meet SiL3 and RIA protection standards.
- Design all electrical controls for UL508A/cUL requirements.
- Consultant for Mechanical Engineers for OSHA concerns and understanding of Controls capabilities.
6-10 years of experience
- Developed PLC code and HMI / SCADA interface corresponding to electrical drawings / schematics and customer specifications.
- Created system functional specifications.
- Developed user manuals for system’s operators and maintenance.
- Assisted with system full functional test in house; supported system start-up in the field, trained operators.
0-5 years of experience
- Prepared bill of materials for vacuum deposition systems
- Analyzed costs for projects and sub assemblies
- Drafted electrical schematics and cabinet drawings in AutoCAD
- Completed ladder logic programming of PLCs used for system automation
- Programmed human machine interfaces (HMIs) and graphical user interfaces (GUIs)
- Performed equipment and material testing and evaluation before product delivery
0-5 years of experience
Test lead for SAT and FAT testing on ride vehicles, and related show effects for the Harry Potter ride.
- Supported testing and software development for the Harry Potter Ride.
- Performed engineering calculations for design, analysis, test and implementation of electrical and control systems on Harry Potter ride vehicles and show effects.
- Performed data acquisition in order to characterize ride vehicle dynamics to ensure ASTM F 2137-04 standards were met.
- Project management
0-5 years of experience
Worked on Allen-Bradley Control Logix controller 1756 PLC for chiller plants and Heat Exchangers using serial communication for programming. Worked on Totalizer sewage project.
- Programming for XL-500 and XL- 800 as per customer specifications using Care 2.1, Care 5.0, Care 7.0 and Care 8.0 for alarm remediation and set point modifications.
- Temperature and Pressure control by modifying various parameters like Heating and Cooling Control valves, Return Air and Discharge Air Flows, percentage of Damper position, Fan speed.
- Creation of HMI projections for industrial Air Handler Units using HMI Web Display Builder 3.5.
- In depth knowledge in monitoring all system functions and is responsible for proper operation.
- Worked for customers like Merck pharmaceutical company in GMP/GLP environment.
0-5 years of experience
Execute quality assurance for automotive embedded systems software builds through manual validation verification test on HIL test benches and prototype engines
- Design, develop, and continual improvement of test plans through use of technical documentation such as Engineering Standards of Work, Application Engineering Bulletins, System Requirement Specifications and Society of Automotive Engineers
- Reduced test bench fault codes by 50% and saved $100,000/yr for time spent troubleshooting bench issues by developing HIL test-bench setup process control plan through Six Sigma Methodologies
- Prevented 2 software recycles per year due to database inaccuracies or almost $200,000/yr by redesigning Controller Area Network/J1939 Database through Six Sigma that added or updated 62 Cummins-specific PGNS (431 SPNs)
- Executed over 500 truck work requests by consulting with internal stakeholders on truck schedules, truck information, and coordinating minor equipment and technicians needed for truck testing
- Worked with test equipment such as Inline, PEAK, and CANcaseXL log adapters, Gartech LUIS boxes, Oscilloscopes, DMMs, Spectrum Analyzers, Function Generators
- Worked with software such as PCAN Explorer, CANalyzer, LUIS, Calterm, and INSITE, VEPS, MATLAB
- Experience with MS Office tools: Word, Visio, PowerPoint, Excel, Project
0-5 years of experience
Went out to remote locations for start ups
- Facilitated FAT Tests onsite at our facilities and customer facilities
- Programmed, modified, and trouble shot PLC and HMI programs for varying applications.
- Experience mainly with RSLogix/Studio 5000 and FactoryTalk View ME
- Lots of field experience fixing small problems such as PLC and HMI programming issues as well as electrical issues inside the PLC cabinet, pumps, transmitters, etc.
- In charge of making sure projects stayed on schedule
- Helped manage/run electrical department
0-5 years of experience
- Designed automated equipment with IDEC, Omron, and Keyence PLC controllers to manufacture connectors for the automotive industry.
- Developed automated test equipment to perform continuity testing and air leak testing on automotive connectors.
- Developed Machine Vision Systems with Keyence CV 2100, DVT 600 SmartImage Sensor, and Legend 530 SmartImage Sensor using programming software FrameWork and Intellect to inspect connectors for defects.
- Setup CO2 Laser Marking systems from Mecco Marking and Traceability to mark connectors with Date Code.
0-5 years of experience
- Improved the function and work flow of the company’s existing HMI (Human Machine Interface) application for both setup techs and operators.
- Developed and applied an XP to windows 7 upgrade process for HMI Industrial computers.
- Developed and documented a new presentation method for HMI systems based on server 2008 R2 Terminal Sessions
- Outlined reasons for HMI upgrades for use by the internal sales department.
- Provided Tier III phone support for customers and internal service techs as needed.
0-5 years of experience
Organized and lead teams of union electricians on large-scale installation projects.
- Worked with a small team of engineers to design, install, and test an automation project integrated into local Kellogg’s plants.
- Aided in programming/implementing conveyor and oven control using Rockwell equipment.
- Worked side by side with electricians on PLC troubleshooting and support.
- Company’s leading expert in electrical motors.
0-5 years of experience
Responsible for the design, construction and startup of two new chemical processing plants in Oak Ridge, TN
- Led the design, construction, and startup of a waste recycling plant that used a molten metal catalyst as the primary reactor solvent for destruction of the waste stream.
- Integrated and installed all field instrumentation, control room and control system components.
- Developed P&ID’s, instrument loop diagrams, control panel drawings, controller logic diagrams, I/O list and instrument index.
- Development of PLC ladder logic and graphics. Vendors included Rosemount field instrumentation, Fisher Controls field, Rockwell PLC-5 with Wonderware HMI.
- Integrated variable speed AC drives with the PLC-5 via Ethernet.
- Developed and implemented analog and discrete control logic using Mod-Soft PLC software with the Modicon 984 PLC using Wonderware HMI graphics.
- Set up a PC based control room with operator consoles and a redundant plant wide Ethernet network.
0-5 years of experience
Specify, design, rebuild and reassembly of legacy manufacturing equipment in the company’s
overseas facility
- Provided troubleshooting and repair support to maintenance personnel
- Multiple legacy equipment retrofit projects
- Emergency retrofitting of equipment due to legacy component failure (i.e. motor drive
- Identifying, investigating and repairing system faults
- Overseeing the installation, repair and re-assembly of acquired equipment
- Demonstrated new and existing equipment to support staff and production managers
- Discussed and evaluated systems failures with plant managers and non-technical personnel
- Co-inventor of a new product line
6-10 years of experience
- Participated in a Major Product Transfer Project as Process/Controls Engineer for Sealing and Labeling conversion process steps and as Controls Engineer support for Coating, Dispense/Dry and Cut/Vial process steps.
- Participated in FAT and site validation for Coat and Dry, Sealing, Dispense and Dry and Labeling processes.
- Provided technical support and troubleshooting to process automation systems for Conversion Process that includes: Web Coating, Sealing, Dispensing, Labeling and Cut and Vial Equipment.
- Application of Control and Automation knowledge and techniques to achieve manufacturing process yield goals and process improvements/developments..
- Developed and executed validation protocols for conversion manufacturing process.
6-10 years of experience
- Automated Cheese Vats for filling and cooking Cottage Cheese
- Redesigned butter re-worker
- Updated DH485 RIO to current technology
- Technical Lead and PLC programmer on Cottage Cheese and Sour Cream project which increased output by 40%
- Build Installed and maintain FactoryTalk transaction manager with interfacing with MSSQL for Downtime Tracking and Daily Production Reports
0-5 years of experience
Designed electrical and pneumatic schematics.
- Programmed program logic controllers, and related control systems.
- Quoted project costs, created forms, and wrote manuals.
- Coordinated customer service, scheduling, detailed record keeping, technical assistance, quality, and inventory control.
0-5 years of experience
- Programmed and configured Rockwell Automation PLCs including ControlLogix, CompactLogix, PLC5 and SLC500.
- Configured and started up AC and DC variable speed drives on AS/RS machines, and integrated into PLC via Ethernet, digital and analog I/O.
- Programmed and commissioned box conveyor system using ControlLogix platform.
- Programmed HMI for Panelviews using FactoryTalk View.
10+ years of experience
Worked with a design team developing machinery designed to automate apparel construction (sewing). Some of the machines involved robotic servo systems.
- Developed devices for detecting defects in knit fabrics during the knitting process.
- Developed controls for material-handling equipment in the yarn manufacturing industry.
- Designed control hardware and software for controlling process water supply in an offshore facility. The application involved pump controls and tank-level sensing and control.
- Improved the control software for a large heat-exchanger system in a textile-manufacturing facility.
- Designed controls for managing and handling process chemicals in a textile plant.
0-5 years of experience
Developed, Managed and Directed, several non-[company name] Suppliers for Carpet Matting in Dalton, GA.
- Directed/Lead process improvements, increasing supplier efficiency and supplier productivity and reducing [company name] manufacturing cost by 25%.
- Controls engineering and process improvements improved the technology and raised the Quality Standards for [company name] products.
- Software Integration of [company name] and Supplier Electronic Order Management Systems.
- Established the “Business Systems” for Technical Writing and Management of Manufacturing Standards.
0-5 years of experience
- Hands-on experience with diesel engine controls (Speed Governing, Controls Model, System Diagrams, Wiring, and CAN).
- Developed a model based engine controls strategy using MATLAB Simulink & MotoHawk for 5.9L diesel engine as well as calibrated the controls using MotoTune tool.
- Hardware-in-the-loop (HIL) Testing of the designed control strategy.
- Developed controls strategy for electronic engine throttle and fuel injector for gasoline engines.
- Generated code for production embedded controllers (electronic control unit) using MATLAB Simulink.
- Developed CAN messages using J1939 Protocol using Simulink.
0-5 years of experience
Design PLC/HMI based control systems for high volume natural gas turbo compressor
- Utilized AutoCAD, SAP, RS Logix and Factory Talk software
- Generated P&IDs Schematic Drawings, Control Narratives, I/O Lists, Bill of Materials, Cause and Effect Diagrams, Alarm and Shutdown Lists, Systems Architecture Diagrams, Factory Acceptance Tests and Interconnection Diagrams
- Installed Bently Nevada vibration detection/alarm system and Rosemont analytical instruments
- Interfaced with plant wide PCS and SIS control systems
- Worked directly with customer to resolve problems/conflicts between the project specs and supplied equipment
0-5 years of experience
Provided sustaining engineering and product enhancements to current OnSun and SFC control system
- Responsible for the redesign of SkyTrakker embedded control board to accommodate domestic and international power supplies.
- Developed technology roadmap for new SFC and SkyTrakker embedded control board
- Sustaining engineering of .NET Framework, C#, WPF Solar Field Computer Windows application
0-5 years of experience
- Troubleshoot control systems to keep machines running efficient
- Incorporate new controls into machining lines to improves Jobs Per Hr.
- Update Electrical Drawings for Electricians
- Contribute as a team member to eliminate production losses
- Execute tasks that are put in place to improve production for the company
- Provide Controls support in machining areas when called for
0-5 years of experience
During my training at Wichita Technical Institute, I was mentored by Larry Asher, formerly the Engineering Director at [company name], and a member of WTI’s program advisory committee. I was offered employment in September of 2013 as a Control System Technician, before being promoted to the role of Controls Engineer in November of that same year. During my time at Tec, my tasks, responsibilities, and core competencies included but were not limited to:
- Project management support from development through implementation phases
- Follow-up troubleshooting and support services
- Programmable Logic Controller (PLC) and Human Machine Interface Systems (HMI) tools and techniques
- Implementation of applications
- General support and issue resolution to key clientele
0-5 years of experience
- Programmed and designed SCADA systems including HMIs, historians, reporting, and alarming using ICONICS Genesis 64, Cimplicity, and iFix
- Worked with Kepware OPC servers
- Worked with SQL databases
- Worked on BACnet HVAC projects in pharmaceutical and data center environments
- Created technical documents including Functional Design Specifications, Site Acceptance Tests, and Point Verification Tests for validated environments
- Worked with customers in the design and implementation of automation projects
- Obtained clearances with DOD
Electrical Engineering Cover Letter Examples
Rate This Article
[Controls Engineer]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
