- Featured in:
-
More Electrical Assembler Resumes
Use these Electrical Assembler samples as a guideline or visit our extensive library of customizable good resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Electrical Engineering Resume Samples
Electrical Assembler Resume Samples
No results found
10+ years of experience
Met individual product timing assembly goals to maintain 100% on time delivery standard.
- Demonstrated accuracy in the assembly of components requiring adept soldering skills achieving near 100% of quality goals.
- Repaired surface mount components.
- Served on plant “Green Team” that provided recycling and energy saving methods to plant employees.
- Joined other team members volunteering for company Association Activities committee for company picnics, ice cream socials and morale booster events.
10+ years of experience
Tested, trouble-shot and repaired component level printed circuit board assemblies and electronic systems. Performed inspections using circuit board schematic assembly, soldering, blueprints and other procedures. Executed calibrations of equipment.
- Implemented new job description by learning technical testing and repair of printed circuit boards, saving time and handling.
- Documented product failures and served as key reference for problem solving technical and mechanical problems.
- Oversaw research and development in the building, testing and calibration of a new product.
- Identified a cost saving method for cosmetic repair of product that is currently in use and saved company thousands of dollars.
- Selected to conduct staff training for the building, repairing and calibration of a new product. Collaborated with engineers to develop training.
- Served on numerous committees including Safety Committee and earning a 98% Compliance Rate for plant.
10+ years of experience
Assembled systems and support structures and installed components, units and printed circuit boards, following specifications and using hand tools and power tools.
- Read and interpreted schematic drawings, diagrams, blueprints, specifications, work orders and reports to determine materials requirements and assembly instructions.
- Measured, cut and bent wire, copper and conduit, using measuring instruments.
- Assisted and conferred with supervisor and engineer to plan and review work activities and to resolve production problems.
- Packed finished assemblies for shipment and transports to storage areas, using hoists and forklift.
- Completed training and have certification for forklift, hoists and crane.
10+ years of experience
Assembled cabinets, modules, chassis, coaxial and ribbon cable and cable harness assemblies using manufacturing procedures and processes.
- Installed finished assemblies or subassemblies in cases and cabinets.
- Performed online inspection ensuring parts and assemblies met production specifications and standards.
- Partnered with engineering team throughout the engineering and prototype development to minimize errors and ensure on schedule completion.
- Reviewed wiring documentation and laid out the cable harnessing per specifications.
- Built various test tools for engineering for prototype and production assemblies.
- Assisted with the development and implementation of engineering cabinets, modules, chassis and prototype assemblies.
- Received multiple compensation awards for cabinet repairs, cycle time improvement, quality improvement, program development and implementation, product delivery and increased customer satisfaction.
0-5 years of experience
Assembled electrical and electronic systems and prototypes according to engineering data and knowledge of electrical principles, using hand tools and measuring instruments
- Conducted inspections for quality control and assurance programs, reporting finding and made recommendations for improvements
- Provided technical assistance and solutions when problems were encountered before, during and after construction
- Collaborated with electrical engineers and other personnel to identify, define or solve developmental problems of new projects
0-5 years of experience
Fabricated, assembled and wired controls and machinery.
- Inspected and tested wiring installations, assemblies and circuits.
- Reviewed and interpreted schematic drawings, diagrams, blueprints, specifications and work orders.
- Packed and loaded finished assemblies for shipment and transportation.
0-5 years of experience
Examined, tested and debugged all components and medical assemblies.
- Detected, handled and eliminated all assembly-related quality control problems.
- Operated and maintained a variety of automated equipments, handheld tools and bench machinery for product assembly.
- Cleaned and organized workplace and followed safety work practices.
10+ years of experience
Built small lights from beginning to end using blueprints, hand tools, air tools and hypot testers. Soldered wires and components onto PC boards, wired, tested, packed and labeled the product.
- Responsible for all inventories for five lines, rotating stock, set up and organization for lines to run efficiently. Set up product for each employee on the lines, assisted employees in production, made out tickets for other departments when product was finished.
- Problem solved when products did not work properly
- Worked closely with the scheduler and department supervisor to make them aware of any issues on the line, stock shortages, back orders and quality issues
- Responsible for training employees on the lines, hour by hour charts for each employee for upper management and requesting over time when needed on lines. Communicated with buyers when extra inventory was needed for large or special orders.
- Filled in on all lines in department when needed.
0-5 years of experience
- Assembled LED, Recessed, and Dimming lighting fixtures.
- Inspected, adjusted, and tested lighting fixtures to correct wiring schematics and diagrams.
- Performed assemblies by using hand tools, wiring tools, pneumatic power tools, and stationary drill
0-5 years of experience
Operated equipment needed to perform job
- Read blue prints
- Performed assembly-type functions using hand or power tools
- Electrical builder: assembled, installed, tested, and maintained electrical wiring and equipment
0-5 years of experience
- Assembly of mechanical subsystems and electrical subsystems in accordance with company standards, schematics, and drawings in order to meet production needs.
- Modified externally manufactured wire harnesses and constructed in-house wiring harnesses, as well as, larger electrical assemblies using schematics and cut-sheets.
- Soldered terminals to meet specification, as well as, cutting conduit to proper dimensions.
- Troubleshooting of the MA production line with supervision and guidance from diagrams and engineering.
- Installation of wiring harnesses on GT35 production line, as well as, all necessary electrical systems and subsystems to ensure timely release of tractors in accordance with schedule.
- Assisted engineering’s attempts to improve and modernize production techniques and practices.
0-5 years of experience
Performed hand soldering, modifying, reworking, reassembly, wiring diagrams, and assembly drawing.
- Checked on work and completed the units, sub-assembly and mounting.
- Followed the policies and procedures in the job and problem solving.
- Read blue-prints, checked the units, and completed the work orders.
- Performed cable cutting and labeling of equipment, as well as used crimp tools.
- Performed cable harnessing, wire harnessing, sleeving, shielding, and wraps.
0-5 years of experience
- Assembled and inspected digital aquatic and power control instruments
- Performed calibration tests on subassembly components manufactured domestically as well as product manufactured by off-shoring partners
- Monitored and tested functionality of firmware and PIC microcontrollers
- Performed tight tolerance soldering on through hole components
10+ years of experience
Worked as a key team member of the production team. Worked in groups and alone on projects and jobs. Received many rewards for excellence and getting work done on time or early. Filled in as a temporary supervisor when needed.
- Worked on jobs doing soldering, harnessing, high temp soldering, forming parts, and data entry.
- Built jobs with cards, harnesses and resisters, diodes, and many other parts on them.
- Attended regular classes, such as soldering and ethics.
- Trained employees on how to build different job.
- Helped resolve problems with jobs, when needed.
- Worked with crimpers, Torques Wrenches, and other Hand Tools.
0-5 years of experience
Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Wire 2.4Hz Recievers andTransmitters and other safety devices into PLC Panels,ACS50’s,and MCC’s.
- Test all Panels and Configure PLC Panels to ensure proper voltage for equipment.
- Assemble electrical or electronic systems or support structures and install components, units, sub-assemblies, wiring, or assembly casings, using rivets, bolts, and soldering equipment.
- Adjust, repair, or replace electrical or electronic component parts to correct defects and to ensure conformance to specifications.
- Explain assembly procedures or techniques to other workers.
- Programed and Tested all MCC’s and Panels.
6-10 years of experience
Learned manufacturing processes of various gas line heater components, kit-level assemblies and thermocouples. Assisted in improving manufacturing techniques for new product designs.
- Performed in-process quality inspections to ensure product reliability and improve workflow efficiency.
- Provided cross-training for other assemblers on techniques to improve product quality and consistency.
- Assisted other areas within the company as needed, such as packaging components and kits in preparation for shipment and assisting with year-end inventory cycle counts.
- In summary, my efforts contributed to Marchi’s ability in 2010 to ship 2.5 times the 2009 revenue using the same level of direct and indirect personnel it had coming out of the historic 2009 industry downturn.
0-5 years of experience
Assembled and repaired rigid and flexible interconnects
- Repaired and updated existing tools and electrical components
- Assembled geo-seismic tools and components according to electrical schematics
- Maintained Geospace and Avalon tool systems
- Built test equipment for field operations
6-10 years of experience
Fabricated components and assembled underground mining machinery
- Read blueprints, wiring schematics and diagrams to determine assembly requirements
- Adapt bolt-on and weld-on parts to customer specifications
- Worked with electrical currents from 24 volts DC to 1050 volts AC
- Drilled and tapped holes to create mounting locations for crucial components
- Balanced individual work with team projects across 3 shifts to meet production schedule
- Conferred with supervisors and engineering to resolve production issues
10+ years of experience
- Built various industrial laser printers, ink jet printers, label printers, control boxes, print heads, encoders, and upgraded repair kits
- Tested, troubleshot, and repaired various industrial label printers, control boxes, inkjet printers and inkjet print heads
- Took part in numerous Danaher Kaizens (Corporate Plant Improvement Initiatives)
- Initiated in updating ISO required manufacturing instructions
- Successful Completion of VAVE (Value Analysis/Value Engineering) Workshop ~210 LPA
- Performed optical and laser alignments and electromechanical adjustments
0-5 years of experience
Route and tie wires to form wire harness used in electrical and electronic equipment: Read instructions, such as work orders, diagrams, and wire lists to determine materials needed and sequence of assembly.
- Select wires of specified color, marking, or length, and loops wires between guide pegs on harness board, following color-coded lines or sequential numbers on board or diagram.
- Wrap and tie wires together at designated points to form harness, using tie-wrap gun.
- Attach ends of wires to components, plugs, or terminal strip, using crimping device.
- Insert cable in plastic bags with sealant around terminals to protect cable from dust and moisture.
- Mark identifying data on completed harness.
0-5 years of experience
Wire components such as uninterrupted power supplies, power supplies, circuit breakers, power blocks, drivers, radios and terminal blocks
- Read and interpret drawings, diagrams, blueprints, and specifications
- Assemble electrical or electronic systems or support structures and install components
- Review schematics and diagrams with engineers and program managers
- Assist with testing and troubleshooting of product
10+ years of experience
Micro-assembled military and other microwave components.
- Assembled electronics as an IPC-A-610D Specialist.
- Used soldering (cut off on side of fax ), wire-bonding, epoxy, HV surface mount, wire wrap, PCBs, wedge bonding, gas welding and other techniques.
- Operated ribbon machine and bend pull machine.
- Read and interpreted blueprints.
- Achieved high percentage of inspection passed.
- Maintained clean and safe work environment.
0-5 years of experience
Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic component parts to correct defects and to ensure conformance to specifications.
- Position, align, or adjust work pieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers
- Cuts wire to specified lengths, using wire cutters.
- Routes, combs, twists, wraps, ties, and attaches wire to terminal points, according to company layout, using hand tools and power tools.
0-5 years of experience
- Wire automation enclosures and panels to support the production automation products for other manufactures
- Work for the Build-to-Print Dept. to meet the customized needs of our customers
- Use wire splicers, terminal screw drivers, amp meters, and other wago tools to perform assigned duties
- Read schematics to help troubleshoot and wire enclosures
6-10 years of experience
Assemble, modify, and rework subassemblies, wire harnesses, and panel assemblies
- Interpret project documents, wire schematics, & blueprints
- Self-inspect in-process work to ensure quality
- Prepare and terminate wires using various terminations
- Assemble connectors, backshells, relays, transformers
- Perform electrical bonding according to Boeing standard BAC5117
- Use of conformal coating
0-5 years of experience
- Install and wire routers, analyzers, antenna controllers, and uninterruptible power supplies
- Install, test, and troubleshoot BNC, N, Twist Lock, F, CAT 5 and RS 232 connectors
- Install machinery and equipment on various items using sketches, layouts, and blueprints
- Work with Datapath DKET 6000Ku Transportable, IP accelerators, ET 3000 and DKET 4530 mobiles
0-5 years of experience
Assemble breaker boxes used in busways ranging from 40- 800 amps.
- Ensure adequate wire length for breaker box maintenance.
- Follow good manufacturing practice for all connections.
- Adept at reading circuit schematics.
- Responsible for in process quality check.
- Fabricate assembly based on product bill of material
- Ensure proper torque specification on breakers, grounding components, and connector bodies used in fabrication of busway plugs.
- Prepare wire ends with ferrules to ensure strength in connection and wire integrity.
6-10 years of experience
- Assembles and configures intricate servers (knowledge in 2008 servers-current)
- Utilizes satellite network division applications for testing
- Constructed hardware and trimmed materials to align with particular electrical dimensions and characteristics
- Knowledgeable in Jupiter I.D.U, DAPT, Spaceway, ODU
- Trained new employees on existing and new updates to system and safety procedures
- Exemplifies procedures in manufacturing environment and attentive to continuous cost, quality and productivity improvements.
- Well versed and experienced in Six-Sigma and other problem solving methodologies in production environments.
0-5 years of experience
- Install electrical components inside structure such as power contactor, switch modules resistors, etc.
- Route and connect wires between components connectors and terminals
- Cut and lugged cables ranging from 550/24 to 1325/24
- Follow work instructions and blue prints for proper installation of components, hardware, torque-specs, and part numbers, etc.
- Modify structure panels to insure proper installation
- Crane operation using 2 ton to 10 ton crane
- Load and Unload shipments
Electrical Engineering Cover Letter Examples
Rate This Article
Electrical Assembler
Last edited by: Gabriela Barcenas, CONTENT STRATEGIST -
Gabriela Barcenas
CONTENT STRATEGISTGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
