- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Electrical Engineering Resume Samples
Electrical Draftsman Resume Samples
No results found
0-5 years of experience
Worked from engineering notes, verbal instructions, and rough or detailed sketches, prepared readable working plans, detailed drawings, parts list, schematics, electrical drawings of major components, systems, and assemblies for engineering or manufacturing purposes.
- Collaborated with 11 engineers to receive instructions and resolve design issues.
- Worked on multiple drawings at once, while keeping record on drawings in process to get completed by checkers.
- Documented drawings to Wind Chill software, by uploading drawings to wind-chill and creating wind-chill parts “Bill of Material”, then created a DAR for drawing to be checked and signed off by Engineers.
0-5 years of experience
Responsible for disassembly of old machine tools to create drawings of replacement parts for machine ways.
- Generated PLC and control panel drawings for in house installation of control equipment.
- Assisted in assembly of control panels and equipment on shop floor when required.
- Designed and assembled friction cup welder machine spindle housing.
6-10 years of experience
Revised and generated electrical schematics for commercial jet engine test equipment using AutoCAD Electrical 2009.
- Created and administered all EE simple and smart symbol libraries.
- Served as Project Archivist. Released all electrical drawings, approximately 300 releases per year.
- Digitized and destroyed over 35,000 old drawings and bill of materials.
- Maintained Work in Process, Transfer and Archive drives.
- Served as liaison with Mastergraphics.
- Feasibility tested and evaluated AutoCAD 2002 to 2010 software.
- Defined ISO9000 Release process with Communications Manager.
0-5 years of experience
Responsible for creating and updating of computerization AUTOCAD electrical drawings. Involved in re-draw work as well as the creation of complex customer ordered electrical panels. Achieved and surpassed set deadlines and expectations of major project orders.
- Delivered efficient and effective work by quickly resolving time sensitive delays in a professional manner.
- Responsible for review and preparation of electrical schematics of large automated equipment.
- Effectively designed and ordered complex part work order forms for extensive electrical designs.
0-5 years of experience
- Electrical Drafting for Hospital Institutions, Commercial Buildings and Parks Department.
- Walk through proposed projects and conducted electrical surveys. Reported all findings, worked closely with project Managers to accomplished tasks.
- Worked with the mechanical HVAC and plumbing project managers which enabled me to gain experience in the mechanical field.
6-10 years of experience
Drafted electrical lighting, equipment/systems wiring, fixture/symbols schedules, one-line diagrams and electrical specifications.
- Operated AUTOCAD Release 12 – Windows.
- Field verified existing building conditions, ensuring that drawings reflected current accuracy.
- Coordinated electrical plans with architectural department.
- Drafted “as built” changes both manually and on CAD.
10+ years of experience
Responsible for the supervision and management of CAD department.
- Provided direction for panel fabrication layout drawings, ladder logic and PLC interconnection schematics, and mechanical field installation diagrams.
- Responsible for developing and writing CAD design and drafting standards.
- Worked closely with engineer to assure final product matched approved drawing schematics.
0-5 years of experience
Full accountability for demonstrating a high degree of initiative, professional on-the-job skills, attention to detail on prospective and current projects. In field, review and update to projects as problems arise. Use of safe creative abilities to ensure objectives are met.
- Work with design and automation group on projects for new installation and capitol I/E projects. Maintain productivity and time management. Keep track of variety of files, permits, documents, drawings, and reports in order to provide highly organized information quickly and to respond to internal and external inquiries in a timely manner.
- Directly responsible for conducting comprehensive builds, analyzing project needs and complying with code and customer requests.
- Proficiently manage critical communications received on initiated plans/drawings and correspond to provide value-added support as well as complete routine and special projects as needed.
- Demonstrate excellent organizational, time management and multi-tasking skills with ability to prioritize tasks while using strong interpersonal skills to work effectively with contractors, operators, and engineers.
- Experienced electrical designer capable of producing electrical layouts detailed drawings from P&ID specs to HAC drawing, one-line / loop drawings, as well as BOMs and provide a comprehensive scope of work.
0-5 years of experience
- Created electrical layouts of the facilities using plan view drawings. Drawings consisted of cable & conduit runs.
- Assisted in designing the (MCC’s) Motor Control Center & (MCP’s) Motor control Panels. This layout consisted of extensive detailing of the overall cabinet layout and their internal components which included contactors, relays, timers & terminal blocks to meet NEMA standards.
- Converted hand drawn layouts & existing CADAM formatted drawings to AutoCAD format.
0-5 years of experience
Created electrical schematics and wiring diagrams from prints, rough drawings and sketches.
- Revised drawings from redlines.
- Worked closely with project engineers, assembly technicians and sales department.
- Worked independently as well as under direction.
- Reviewed drawings for accuracy and completeness.
0-5 years of experience
Collaborate with Principal Electrical Engineer on the design and drafting of electrical plans.
- Draft and prepare of electrical design drawing, wiring diagrams and plans
- Supervised CAD operators and coordinated the work with other
- Coordinated with other firms for the consistency of presentation of CAD
0-5 years of experience
- specialize in electrical system engineering and programing for motor pump controls, HVAC, water fountain controls and other various electrical systems.
- Proposed customer submittals, which include all electrical schematics, schematics for enclosure layouts with all components, and bill of materials.
- Researched electrical components for customers and quotes.
- Tested Motor control panels and Control panels.
0-5 years of experience
Utilizing AutoCAD on a daily basis in a professional setting.
- Picking up red-lines given by Designer or Engineer.
- Creating drawings and details from rough sketches.
- Creating Conduit/Cable Schedules, Motor Schematics, and One-line Diagrams using AutoCAD 2012.
- Using Raster Design to update old drawings that are in TIFF format.
- Printing and converting drawings into PDF’s.
- Assisting Engineer and supervisor in other miscellaneous office task.
0-5 years of experience
- As built numerous electrical panel drawing per field surveys.
- Designed a quantity of plot plans showing routed conduit meeting with required conduit fill.
- Created design project packages for construction.
0-5 years of experience
Assisted and mentored by Delphi Packard Electric engineers in the development, revisions, and upgrades to electrical prints for automated production equipment.
- Assisted fellow drafters in completion of all control electrical drawings.
- Toshiba * Automation Direct
- Cognex (Checkpoint) and Vanguard Systems.
- ABB, Siemens, Allen Bradley, Emerson, Bodine, Danfoss, Adept, and Vamco Drives.
- A-B Panel View * A-B Panel View Plus *C-More
- Cherry * A-B Dataliner *Quick-Panel
- RSLogix * RSLinx * A-B 6200
- RS View * Panel Builder * Cognex Insight
- C-More Design * Quick Design * RS Network
0-5 years of experience
Direct supervision of Electrical works being undertaken by [company name].
- Take charges and supervise Electrical installation on residential, commercial projects.
- Preparation of shop drawing for the approval from American Corps of Engineers.
- Submittal for electrical material to be used for project.
- Compliance of specifications and contract term and conditions.
0-5 years of experience
Working with AutoCAD 2010 Electrical package.
- Creating work drawings for contractors.
- Assembling drawing packets for project bids.
- Constructing drawings from field research.
- Updating site panel schedules.
- Answering contractor questions during construction phase.
- Separating and organizing drawings depending on area number, location, and type of equipment.
0-5 years of experience
Draft and design 3D Inventor Drawings
- Develop detailed designs for mechanical equipment and controls.
- Provide details on component descriptions.
- Resolve design problems.
- Review and analyze specifications.
- Correct operating deficiencies.
- Draft technical details.
- Specify dimensions, materials, and procedures.
- Draw in minute details of structures.
- Inventory, shipping and receiving
0-5 years of experience
- CADD Drafting of Electrical Ladder Logic Diagrams (AutoCAD)
- Electronic Schematics (AutoCAD)
- Conversion of paper documents to digital format