- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Electrical Engineering Resume Samples
Electronics Assembler Resume Samples
No results found
0-5 years of experience
The fourth largest defense contractor in the United States. Completed assembly projects as assigned by management. Ensured equipment was calibrated and in working order. Built circuit boards per the J-STDs. Reworked and repaired assemblies as required. Evaluated assembly drawings and suggested revisions as needed.
- Met scheduling requirements for four consecutive years, with no defects.
- Recognized for good performance.
- Earned several awards for on-time, and even ahead of schedule completion.
- Identified and helped troubleshoot potential issues before they affected production.
10+ years of experience
Created, terminated, and designed Wire Harness using established guidelines.
- Successfully assembled Electronic Components, Subassemblies, Assemblies and Systems
- Executed daily requirements in the manufacturing of UHF, VHF, and Digital TV Transmitters
- Wrote, designed, and produced work instructions for multiple Assemblies
- Followed Work Orders, Production Drawings, and Interconnects per verbal and written instructions.
- Instrumental in the Prototyping of new Products
- Performed the duties of Back-Up Team Leader on several occasions
6-10 years of experience
Built, cabled and assembled MRK racks from schematics and engineering drawings
- Reworked and repaired units rejected by inspection or test personnel to ensure that units were operational for production
- Performed quality inspection checks on built and repaired units throughout the manufacturing process
- Performed chassis wiring utilizing wire lists and schematics.
- Maintained production records, logs and other reports on equipment and assembled items
0-5 years of experience
Fabricated electrical /electronic cables using cable drawings and wiring diagrams
- Built cables to meet customer requirements using insertion and extraction tools, Amphenol connectors, various crimp tools, soldering when required, applying knowledge of J-standard and IPC-610/620 specifications.
- Supervised 3-10 employees daily
- Developed best manufacturing practices and procedures for new products.
0-5 years of experience
Assembled and soldered electronic printed circuit boards, small mechanical assemblies and sub-assemblies.
- Used basic electronic assembly tools, instruments and equipment in production and assembly.
- Prepared wires for assembly by measuring, cutting, stripping, tinning and attaching contacts.
- Used a computer to determine daily assignments and reviewed drawings and notes associated with assembly.
- IPC 610 class 3 trained.
- Used high powered microscopes for fine pitch surface mount.
0-5 years of experience
Soldered fine pitch integrated circuits (ICs), smt parts, and thru-hole technology using microscopes.
- Reworked PCBs that have defective parts using rework equipment.
- Routed and connected wires between individual component leads and other components, connectors, terminals and contact points.
- Performed intermediate assembly tasks, such as epoxy bonding and curing, and helped mechanical assemblies.
- Used AMS and computer-based documentation to assemble all PCBs with scanning devices.
- Read and interpreted technical datasheets and engineering documents.
0-5 years of experience
- Read and interpreted schematic drawing, diagrams, blueprints, specifications, work orders to determine material requirements or assembly instructions.
- Assembled electrical or electronic systems or support structures and installed components, unit, subassemblies, wiring, and seemly casings.
- Adjusted, repaired, or replaced electrical or electronic component parts to correct defects and to ensure conformance to specifications.
- Positioned, aligned, and adjusted work pieces or electrical parts to facilitate wiring or assembly.
- Drilled and tapped holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or interments.
- Inspected or tested wiring installations, assemblies, or circuits for resistance factors or for operation and recorded results.
0-5 years of experience
Worked from drawings and plans, blueprints and computers, ensuring accuracy of parts lists and reported discrepancies.
- Experienced in the use of hand and power tools as well as the hydraulic crimper.
- Guided and instructed small groups of employees in various procedures including bonding and wiring techniques.
- Crimped and soldered all types of terminals, wiring cables, harnesses, ribbon cables solar arrays, test equipment and ground support.
- Manufactured shield terminations and soldered microelectronic devices.
- Developed general office and bookkeeping skills.
6-10 years of experience
Generated a range of electronic assemblies from various blueprints, schematic and specification documents.
- Ensured proper selection, checking and cleaning for all electronic components.
- Die attach, PCB soldering of both thru hole and surface mount and assembly for high volume production in clean room environment under microscope.
- Wire bonding under microscope for MMIC bias and/or RF connections.
- Die inspection. Supported design engineering team for R&D efforts.
0-5 years of experience
Assemble Complex Electrical/Electronic equipment in accordance with UL/CE standards, BOMs and engineering drawings
- Use of Schematics and wire run lists to ensure correct and complete installation of all wiring
- Assisted Engineering with initial design and construction of prototype units
- Use of Machining tools, bus bender, shearer, band saw, hydraulic press and brake, to build parts of specified requirements and to construct specialized bussing in accordance with engineering requirements
- Coordinated with engineering and upper management to overcome deign and construction flaws
0-5 years of experience
- Assembled and repaired new and used instrumentation equipment
- Interpreted schematics to high tolerance and detail
- Worked in electronics with some of the newest technology in drilling instrumentation
- Worked in teams to ensure customer satisfaction and quality control
- Documented and photographed product details
0-5 years of experience
SMT OPERATOR- Operate SMT equipment and machinery, such as screen and stencil printers, SMT pick and place machines, standard soldering tools and equipment, feeders and reflow ovens. Also had to verify, inspect and audit products.
- Automated opitical inspection(AOI)- Visually inspected PCB boards for defects and then put them through the AOI Machine which is for inspecting parts for further defects.
- Radial/Axil machine- operated a pick and place machine for PCB board through hole component
- Final Functional Test- performed the final test on the product before its was packaged and shipped out to the customer.
- Slide Line Assembly- placed PCB boards into pallets and hand placed components that where required for that product before sending through a solder wave oven.
0-5 years of experience
- Key trainer for the service paging department
- Performed technical repairs (soldering & de-soldering) via sketches, manuals and schematics
- Diagnosed, analyzed, and ensured quality control for more than 20 paging devices
- Extensively used high tech testing equipments daily
6-10 years of experience
VSWR and Isolation using HP8350 RF Generators and HP8757 Analyzers with relevant waveguide test set ups
- Trained in various RF test applications for GUNN Diodes and Oscillators making use of oscilloscopes
- Die bonding of Semiconductor products to dice sizes between 10-15 mil
- Thorough knowledge of industry tools, hardware and epoxy compounds
- Rubber stamping parts using Epoxy
0-5 years of experience
Performed mechanical assemblies on RF amplifiers for wireless communication system. Also performed wiring, soldering, touch-up and reworks.
- Understand ESD and workmanship standard ANSI IPC-A610/ISO 9000.
- Experienced in re-flow, final inspection of printed circuit boards, hands on soldering, and color-coding.
- Certified in soldering and workmanship standard J-STD-001 Revision C, and certified of completion in high performance process management Overview.
0-5 years of experience
- Tested, repaired, potted, assembled, inspected, labeled, and transferred parts to boxing
- Trained others on process of newly launched products; inspected boards and tags for quality standards
- Reviewed orders, pulled parts per bill of material, split inventory labels, assembled and programmed as needed, boxed and printed shipping labels for orders, assigned shipping boxes to bill of lading
0-5 years of experience
Operated machinery that produced printed circuit boards for the video arcade and casino gaming industries.
- Experience in surface mount technology, and the soldering and assembly of thru-hole circuit boards.
- Performed testing and assembly of original prototype circuits.
- Promoted to team leader in the testing and quality control department.
- Knowledgeable in analog and digital circuitry and devices.
- Carried out task by utilizing blueprints, electrical schematics, and mechanical drawings.
0-5 years of experience
- Worked in a three person cell assembling over 15 different components that were vital to meeting production needs.
- Worked proficiently in a one person cell making 6 different manufactured parts.
- Participated in LEAN and 5s training and exercises
0-5 years of experience
Utilizing Customer Drawing and Schematics to ensure proper assembly and installation of hardware and tolerances of parts and measurements.
- Assembly of 30 -50 ft. Conduit cables and Housing Assembly Production
- Cable assembly and Production for various electronics device
- Soldering wires to make electronic connections for proper wire and grounding usage by utilizing customer drawing and schematics.
- Ensuring proper tolerances for the product in the length and width.
- Proper use of measuring devices.
- Inspection of wire assembly for proper grounding as well as polarity connection and exposure of wiring
0-5 years of experience
Inspected and tested small arm units during subassembly and assembly stages.
- Executed daily operations of production.
- Ensured that mechanical action, finish and assembly conformed to specifications.
- Pushed gauge through bore of gun to verify straightness of barrel.
- Measured dimensions and clearances of components.
- Verified conformance with specifications, using gauges.
- Tested tightness of screws, bolts and pins, using hand tools.
- Recorded on tags firearms rejected and reasons.
0-5 years of experience
- Duties included wire harnessing, P.C. board assembly and hand soldering. Operated wave soldering machinery.
- Read and reviewed blueprints, schematics and instructions for projects.
- Designed projects following specifications. Set up and tested products or prototypes.
- Perform a variety of harness and cable assembly installation including clamping, checking clearances, crimping, wire dressing, soldering and mechanical assembly of components.
10+ years of experience
- Lead electronic assembler and QA tester for various electronic components used for production of commercial sunless/spray on tanning machines.
- Assembled circuit boards and controller boxes used in production of four different types of sunless tanning boots and machines: Versa Spa, Versa Pro, Mystic Tan and Evolv (a hand held machine).
- Lead QA testing efforts to ensure that assembled circuit boards and controller boxes have no defects.
- Took specific actions to amend detected product fails: soldering, cable stripping, cramping wires, re-programming circuit boards, etc.
- Great understanding of electronic blueprints.
- Skilled with the following tools: solder gun, drill gun, crimpers, strippers, voltmeter, etc.
- Maintained, cleaned and organized assembling lab and equipment as needed.
0-5 years of experience
Assembled electronic equipments and parts as per company’s policies
- Created electronic assemblies in given budget
- Repaired and modify electronic assemblies as per the requirement
- Used different hand and power tool to create assembly
- Trained juniors on how to developed assemblies by using secure ways
- Fork lift operator
- Computer Assembler
10+ years of experience
- Assembled electronic components for various GPS products, such as ELTs & RLBs
- Tested GPS products for quality control and assurance utilizing satellite simulators
- Soldering of electronic components and wires
- Performed blueprint reading for electronic assemblies
0-5 years of experience
- Assembled of electronic and electrical systems according to blueprints
- Verified, read and soldering of materials as specified in assembling work order by using appropriate equipment
- Used various bench tools and following work specifications of blueprints
- Performed soldering and prepping of components
- Hand load, install and position very small components
- Maintained work orders, specifications and assembly instructions
- Worked very closely with assembly lead and press operators
0-5 years of experience
- Assembled electrical solenoid and shutters for aircraft equipment.
- Inspected units for quality control.
- Assembled and processed units for shipments to our various customers.
- Packaged units for shipment.
- Operated a Windows-environment PC, utilizing Microsoft Office to complete tasks.
0-5 years of experience
Perform daily assemblies pertaining to numerous projects using engineering drawings and work instructions.
- Utilize soldering skills and experience to work/rework circuit boards.
- Maintain work logs pertinent to current projects during assembly.
- Inspect components during assembly work.
- Build wiring harnesses using a JST Crimping machine.
- Underfill ball grid arrays on printed circuit boards.
6-10 years of experience
- Soldered pc boards
- Read schematics and detailed instructions for electrical components
- Assisted other departments (shipping, inventory, etc.) with various duties
- Pulled and issued packaged orders for shipping
- Performed housekeeping for shop and work areas