- Featured in:
-
More Electronics Technician Resumes
Use these Electronics Technician samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Looking for cover letter ideas? See our sample Electronics Technician Cover Letter.
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Electrical Engineering Resume Samples
Electronics Technician Resume Samples
No results found
0-5 years of experience
Served as a lead technician for the Operation and Maintenance of the II MEF computer, telephone, and switching assets, Third Echelon Test System, and Tracked Vehicle Data Output Display Modules.
- Maintained proper operation of ground radio, satellite, and telephony devices, including all Digital and Analog electronic components, ensuring over 98% system reliability
- Extensive experience in AC/DC Theory and operation, as well as troubleshooting and repairing RF circuits down to component level using Schematics or approved procedures
- Analyzed problems and repaired all electronic equipment including, but not limited to Marine Common Hardware Suite communications equipment.
- Conducted research and development concerning design, manufacture, and testing of industrial components, equipment, and systems.
- Interpreted test information in the form of test work requests, manufacturing procedures, drawings, schematics and instructions from engineers and supervisors.
0-5 years of experience
Provided communication operation and technical support for VHF, UHF, and Satellite Communications assets for company staff consisting of over 80 employees
- Trained 2 new junior technicians in encryption procedures, circuit board repair, and troubleshooting techniques
- Selected out of a pool of 12 competing technicians to serve as the company liaison to service outside agencies or organizations
- Exceeded company standards by maintaining a 90% operational readiness rating for all sensitive communication equipment for entire length of employment
- Repaired fiber optic cable, set up audio/visual training aids for staff, soldered connections, spliced wiring, and built circuit boards
10+ years of experience
Served as a technician and Maintenance Chief for the Telephone/Computer Maintenance Section, G-6 Supporting Establishment Maintenance Section, and Technical Control and Analysis Center (TCAC) Section.
- Analyzed problems and maintained proper operation of unit ground communication equipment assets resulting minimal down time and quick turnaround of equipment back to the owning sections.
- Extensive experience in AC/DC Electrical Theory and operation, as well as troubleshooting and repairing electrical circuits down to component level using schematics or approved procedures
- Analyzed problems and repaired all unit electronic equipment including resulting in 99% system uptime.
- Interpreted test information in the form of test work requests, manufacturing procedures, drawings, schematics and instructions from engineers and supervisors.
6-10 years of experience
Served as Supervisor for maintaining deployment readiness with both the AN/TRN-44A and AN/TRN-47 TACAN systems.
- Secret clearance level provided and sustained for entirety of enlistment.
- Maintained proper operation of AN/TRN-47 TACAN system during OEF122-OEF133 Afghanistan.
- Experience with AN/TPQ-44 METMFR doppler radar system and other tactical weather equipment.
- Experience in RF Theory and operation, as well as the ability to troubleshoot and repair RF circuits down to component level using Schematics and approved procedures.
- Analyzed problems and repaired all electronic equipment including PRC-117 radio sets and the AN/TPQ-44 Doppler radar.
- Conducted research of equipment technical manuals to correct errors in troubleshooting procedures.
- Utilized supervisory skills in maintaining equipment and providing proper training.
0-5 years of experience
Electronics/Avionics Technician, Calibration Technician. Experienced Production Manager, Shift Supervisor with strong background in scheduling of production assignments and direct supervision of technicians. Calibrated, installed and repaired equipment to prescribed specifications and signed overhaul documents for equipment replaced or repaired.
- Extensive responsibilities in troubleshooting, diagnosis, fault isolation, testing, operation alignment, adjustments, installation/removal, assembly and preventive/corrective maintenance of a wide variety of electronic systems/components.
- Troubleshot and repaired analog and digital systems
- Performed and supervised onsite calibration in hazardous environments.
- Performed scheduled and unscheduled maintenance.
- Developed and implemented effective tracking and monitoring systems to significantly enhance overall production efficiency and reduce operating costs.
- Supervised and trained personnel in the troubleshooting and repairing of Physical/Mechanical equipment while meeting a demanding production schedule.
- Successfully managed 4 programs through AMI(Aviation Maintenance Inspection) with no errors.
0-5 years of experience
Oversaw exterior communications between ship and shore contacts via video teleconferencing.
- Wired block diagrams, operated automatic test equipment, and conducted preventive maintenance.
- Ensured optimum quality and success of 25 high-level, secure video teleconference meetings supporting embarked staff during real world operations.
- Used extensive wire-tracing capabilities to isolate faulty cryptographic units and provide additional wiring information.
- Repaired 20 line interface modules and ten amplifiers to a single audio system, saving the ship over $100K in additional replacements.
6-10 years of experience
Assisted technicians in computer and printer issues
- Instructed technicians in repair and procedures of Colleague Pumps
- Repaired and tested Colleague Pumps and maintained records
- Tested Infusion pumps using Siebel Software which conformed to FDA requirements
- Trained technicians in repair of Colleague and Flogard infusion pumps participated in innovative repair process that increased production by 60%
0-5 years of experience
Served as Ground Radio Repair Technician, facilitating maintenance and customer service to a variety of communication electronics systems and their operators.
- Provided customer service daily with high level commanding officers to deliver status reports on mission required equipment and convey to them in understandable terms the condition of the equipment and how long the maintenance cycle would be scheduled.
- Identified parts for systems for repairs that would be procured based within an annual budget and priority of the equipment.
- Extensive experience in RF Theory and operation, as well as troubleshooting and repairing RF circuits down to component level using schematics or approved procedures
- Able to effectively communicate with customer to help identify equipment’s malfunction and provide understandable feedback to said customer.
- Interpreted test information in the form of test work requests, manufacturing procedures, drawings, schematics and verbal instructions from engineers and supervisors
6-10 years of experience
- Maintain efficient operation of nuclear reactor equipment by monitoring and scheduling repairs and maintenance processes.
- Encourage staff development and optimal performance by training 30 Junior Reactor Operators, 150 personnel on operations, coordinating schedules of 7 technicians, and maintaining open communication among departments.
- Conserve and monitor labor and resources by documenting and tracking fuel usage, startup, and shutdown times.
- Streamlined processes and increased productivity by conducting troubleshooting, repairing and replacing faulty components, and operating Reactor Plant Control System.
- Exceeded expectations by completing dozens of maintenance items ahead of schedule and providing early maintenance availability.
- Improved operations by redesigning daily log reporting forms.
0-5 years of experience
- Performed corrective and preventative maintenance on mission specific avionics components equaling over 2,000 man hours on the Sea Hawk.
- Maintained extensive knowledge of wiring diagrams, inter system communications, component locations, and functions in compliance with government regulations.
- Ensured 100% mission readiness of all radar, navigation, and communication systems and subsystems.
- Stood regular 12 hour watches ensuring safe transit of personnel and equipment.
- Supervised small team of technicians and ensured the proper training of countless subordinates.
- Cleaned and maintained work place areas such as: shop, lavatories, stairwells, and office spaces.
6-10 years of experience
Troubleshoot electronics equipment to component level using schematics and blueprints. Also used various test equipment, such as digital voltmeters, oscilloscopes, signal generators, and power meters.
- Used Microsoft Office (Word, Excel, and Outlook) to create shipping documents and email documents to the appropriate parties involved to ensure all equipment was inventoried, accounted for, and ready for shipment to various locations throughout the world.
- Responsible for disassembly/assembly of multi-million dollar equipment and preparing for shipment to be sent to appropriate people for prompt delivery of our equipment.
- Wired/cabled various equipment into racks in mobile trailers and facilities.
- Perform manual tasks and ensured that all policies and procedures are followed.
0-5 years of experience
- Maintained, operated and repaired state-of-the-art computer and electronics equipment, with exposure to classified information
- Part of a highly accomplished team
- Kept and maintained all supply records for operational necessity
0-5 years of experience
Work with AEI tag readers and maintenance
- Performed Hot Box Detector systems maintenance and inspections
- Installed and managed wireless IP camera systems
- Repaired and calibrated portable/mobile radio systems
- Researched GE CAB generator signaling systems
0-5 years of experience
Basic and Advanced Electronic Training, Theory, Troubleshooting, and Schematic drawing and reading.
- Laid out, built, tested, repaired and modified developmental and production electronic components, parts, equipment and systems, such as computer equipment, missile control instrumentation, radar system, fire control systems, communication systems, radio systems, test equipment and cryptological encoding messaging systems
- Trained work center in High Frequency Radio Group theory, fault recognition and repair.
- Head HFRG Technician on board USS Oscar Austin.
- Was instrumental in repairing the HFRG Radio Group on board USS Oscar Austin while reporting to the ship in 5th fleet while on deployment in 2010
- Trained in Comsec (Communication Security)
- Still obtaining a Secret Security Clearance.
- Structured and maintained all communications systems onboard USS Oscar Austin.
- Successfully handled multi-million dollars of electronic equipment and hazardous electrical radiation work in environments with no loss of life or injury.
6-10 years of experience
Served as Lead Avionics Technician
- Supervised and maintained communication/navigation and weapon release systems for over 18 B-52H airframes
- Extensive experience in wire maintenance, to include splicing, terminal lugs, Coaxial connectors, Triaxial connectors, and cannon plugs
- Frequently tested EDL Tracker equipment, as well as Targeting Pod removal/installation and operation
- Fluent in wiring diagrams and Technical Orders
- Lead Shift Supervisor; Directed and supervised 5 Airmen daily in maintenance tasks, documentation and AF Regulations.
- Security Clearance: Secret
0-5 years of experience
- Promoted from Electronics Technician Level 2 to Group Lead.
- Responsible for managing 3-7 electronic techs to ensure quality results within allotted time goals for projects.
- Selected by Boeing’s Field Engineers to choose my own team and lead them in installing a Digital Automated Flight Control System (DAFCS) prototype on a CH-47 based on their experience with my abilities and work ethic.
- Tracked each day’s accomplishments and communicated expectations to the next shift.
- Installed, terminate and check the continuity of the wires, harnesses, and electrical systems on a CH-47 Chinook in a manufacturing environment.
- Skilled at reading/interpreting wiring diagrams, electrical schematics, electrical drawings, and technical manuals.
- Proficient with all general purpose electronic test equipment (GPETE) for troubleshooting and maintenance.
6-10 years of experience
Accumulated four years of direct experience operating onboard a nuclear powered surface ship, during critical and shutdown conditions
- Executed numerous reactor startups and shutdowns, while monitoring/recording plant parameters to ensure reactor safety
- Provided secret security clearance (current)
- Qualified Reactor Operator/Shutdown Reactor Operator/Throttleman/Log Recorder/Instrument Watch/Damage Control Petty Officer/Reactor Control Point Watch
- Oversaw/Briefed many key officials on Reactor Operations including maintenance activities and normal/abnormal operations
- Successfully carried out numerous preventive and corrective maintenance actions on reactor instrumentation and control systems
- Proficient with utilizing test equipment, schematics, and technical manuals to diagnose system malfunctions to the component level
- Provided training to personnel on maintenance techniques and systems knowledge.
- Direct oversight for major test procedures such as reactor rod control system testing on multiple occasions
6-10 years of experience
- Provided leadership for 36 Marines and Sailors by delegating tasks to facilitate maintenance on confidential equipment on the aircraft.
- Communicated effectively with diverse populations, and effectively managed a diverse workforce.
- Conducted counseling for Marines and Sailors monthly.
- Lead technical training in the work center weekly.
- Assisted with weekly, monthly, and annual reports that tracked over 400 secret and confidential serialized components, publications, and software cards utilizing Microsoft Word and Microsoft Excel, resulting in 100% accountability. Monetary value exceeding $41 million.
- Proficiently changed from one work specialized computer program to another specialized computer program in order to complete assigned tasks.
- Managed sales and distribution at MCAS Miramar recycling center.
- Proficient with Microsoft programs.
0-5 years of experience
Boot camp in January 2014 followed by Job specific training for 9 months in Great Lakes, IL. Worked in leadership positions during those nine months. Responsible for administrative work associated with training, qualifications, etc. In Job training consisted of learning to work with electricity and work on electronics.
- Electronics Technician, completed Job specific training in November of 2014. Work with all types of electronics.
- Repairing electronics, mostly computers, at a local charity.
- Built personal desktop.
- Repair computers and small electronics.
6-10 years of experience
Install, inspect, test, and repair avionics equipment such as radar, radio, navigation, and weapon control systems on F/A-18 aircraft. Adjust, repair, or replace malfunctioning components or assemblies, assemble components such as switches, electrical controls, and junction boxes. Connect components to assemblies such as radio systems, instruments, magnetos, inverters, and in-flight refueling systems. Install electrical and electronic components, assemblies, and systems in aircraft. Interpret flight test data in order to diagnose malfunctions and systemic performance problems. Lay out installation of aircraft assemblies and systems, following documentation such as blueprints, manuals, and wiring diagrams
- Supported Navy and Marine Corps F/A-18 pilot training, working at Strike Fighter Wing Pacific Maintenance Unit El Centro
- Worked in organizational avionics support of 12 mission capable F/A-18 Super Hornet aircraft at Fixed-wing Fighter/Attack Squadron 41
- Supervised over 600 aircraft maintenance actions and the performance of 250 weapon release and control checks, significantly increasing mission readiness and the safe expenditure of ordnance as an F/A-18 Super Hornet and Legacy Hornet maintainer, as well as a weapon release and control check team member
- Trained junior personnel in the maintenance and repair of avionics systems as acting shift supervisor
- Extensive experience in the operation and maintenance of Airborne Fire Control Radar, Digital Data Computers, Digital Data Displays, Radios, Intercommunication Systems, Video Recording System, Weapon Control Systems, Precision Multimeters, Data Lines, Antennas, Forward Looking Infrared Pods, Aircraft Self Defense Systems, Deployable Flight Incident Recorder (Black Box), and GPS Navigation
0-5 years of experience
Program and Research various types of Microcontrollers (Samsung, Texas Instruments, Maxim, Motorola)
- Abide by ESD (Electrostatic Discharge) procedures and tests
- Follow new programming procedures for every new programmer available
- Assembling prototype models based on specification provided by Engineers
- Interpret assembly drawings, schematics and procedures.
- Follow test procedures provided by Engineers (EATP) Electrical Acceptance Test Plan
- Assist and Provide feedback to Engineers to improve tests based on products
- Generate/Write reports and proceduress
0-5 years of experience
- Design, specify, install, maintain, diagnose, repair and calibrate electronic, electrical and electro-mechanical devices, which may include PLC and Scada Systems
- Interpret electrical plans and diagrams from schematics and blueprints
- Assist in installing, interpreting, and modifying computer software for various applications
- Maintains, installs, and repairs transformers and wiring panels
- Services and repairs pumps, starters, motors, and other types of electrical equipment
- Performs preventative maintenance on medium voltage electric lines and switchgear up to 4160 volts
6-10 years of experience
Experience working in a fast-paced, high-pressure environment.
- Familiarity operating within an organization adhering to policies and procedures.
- General Purpose Electronic Test Equipment Repair and Calibration Technician accountable for operation, calibration, maintenance, and repair of test equipment.
- Primary UHF Systems Technician responsible for operation and repair of UHF and VHF transceivers, patch panels, and associated antenna groups.
- Primary Naval Modular Automated Communications System (NAVMACS) Technician responsible for operation and repair, ensuring proper routing of incoming and outgoing message traffic.
- Divisional Damage Control Petty Officer in charge of planned maintenance of damage control equipment and training of safe and proper handling of hazardous materials.
- Divisional Safety Petty Officer responsible for educating others in general electrical safety, equipment tag-out procedures, and working aloft.
0-5 years of experience
3rd Class (Enlisted Surface Warfare Specialist)
- Secret security clearance
- Over 200 hours working aloft on ship’s main mast maintaining antennas
- Over 1,500 hours of electronics technician supervisor watches while at sea
0-5 years of experience
- Install, repair, maintain and troubleshoot various types of electronic equipment which include training simulators, graphic processors, PC’s, and simulated weapons
- Perform preventative maintenance on training simulators which include M1AI, M1A2, M2A3 and RVSs
- Perform troubleshooting on malfunctioned simulators during training operations
- Troubleshoot and repair weapons PC
- Set up projectors and align hit cameras for calibration
- Data entry of work orders into the Maximo data base
- Collaborate with fellow coworkers to troubleshoot and repair modules
0-5 years of experience
- Manufacturing & Testing of production equipment that uses two robotic Pick and Place arms.
- Troubleshooting analyzing and repair of malfunctioning production equipment.
- Helping Engineering troubleshoot and repair.
- Perform Validations of new procedure.
- Correct and write new procedure for assembling and testing.
- Knowledge of Aries program
- Perform final testing and review of documentation before release of product.
0-5 years of experience
- PLC-Ability to read and write ladder logic with experience working with Allen Bradley 5, 500, and 5000 models.
- Troubleshot and repair electrical/mechanical problems
- Troubleshoot issues down to the root cause and ability to read and interpret schematics
Electrical Engineering Cover Letter Examples
Rate This Article
[Electronics Technician]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
