- Featured in:
-
More Marine Electrician Resumes
Use these Marine Electrician samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Electrical Resume Samples
Marine Electrician Resume Samples
No results found
0-5 years of experience
Executed electrical and equipment hook-ups through the proper and safe use of hand and power tools while working on the USS Connecticut at the Puget Sound shipyard.
- Troubleshoot and repaired shipboard electrical systems, equipment with specified technical information, including 600 VAC or less
- Utilized all tools and test equipment as assigned for the installation, maintenance, operation and troubleshooting of electrical systems
- Interpreted and worked from drawings, job specifications, instruction manuals, manufacture’s handbooks, change order, and contract specifications
- Updated work packages daily, as well as read and used schedules and signed for completed work and inspections in compliance with quality assurance standards
0-5 years of experience
Scheduled preventive and corrective maintenance and conducted repairs, both independently and as part of a team
- Performed project management tasks through scheduling personnel, tasks, resources, and calendar completion dates
- Performed emergency and routine repairs both at sea and ashore and performed casualty analysis
- Trained, scheduled, and supervised qualified watch standers and trainees
- Mentored subordinates for professional development and evaluated for performance reviews
- Operated control boards and monitored instrumentation in the operation and distribution of power among four 8 MW steam driven generators and four 450V 400 Hz motor generators
- Worked in extensively in a shipyard environment during the 2013 DPIA
6-10 years of experience
Studied Blueprints, Schematics, Manuals, and other specifications to determine installation procedures
- Assembled, installed, tested and maintained electrical or electronic wiring, equipment, appliances, apparatus and fixtures, using hand tools and power tools
- Connected wires to circuit breakers, transformers, or other components
- Planned layout and installations of electrical wiring, equipment and other fixtures, based on job specifications
- Repaired and adjusted equipment, machines and defective components, replacing worn parts such as gaskets and seals in watertight electrical equipment
- Advised management regarding customer satisfaction, product performance and suggestions for product improvements.
0-5 years of experience
Lead electrical technician of the 80 and 100 motor yacht engine room
- Supervised two technicians and all electrical work in engine room
- Planned, laid out, and installed various electrical components, conduit, and conductors in engine room
- Terminated various components including breaker panels, control panels, pumps, motors, lighting, receptacles, and switches
- Performed quality control and hot checks of completed electrical systems
0-5 years of experience
Provided wiring installation, equipment termination, trouble shooting till operational for sound powered E-call system during construction of USS George H.W. Bush
- Completed work-package by running cables, splicing and connector installation
- Preformed controller overhauls and repair, wired electrical motors and control circuits. Performed operational tests
- Provided wire installations for switchboards, power panels, transformers connection boxes, lighting and various electrical systems
- Troubleshooting, Isolating, and completing electrical repair on numerous naval vessels while assigned to work for Earl Industries LLC
0-5 years of experience
Test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures to ensure compatibility and safety of system.
- Planed installation of electrical wiring, equipment, etc. based on job specifications and local codes. Determined size and type of material such as controllers, switches, panels, cables and conduit size.
- Removed, installed, modified and repair various electrical systems. Calculated voltage, amperes and resistance requirement.
- Read blueprints to determine install requirements.
0-5 years of experience
Worked as a marine electrician on Navy vessels at Mayport Naval Station Jacksonville, FL.
- Performed a number of controller overhauls, repair and maintenance.
- Installed new cables, fixtures and equipment.
- Performed numerous check points and operational tests of electrical systems onboard various vessels.
- Participated in compartment completions.
- Disconnected equipment, electrically and mechanically for interferences and provided temporary power (440v- 120v) for work to be completed in numerous vessels.
- Performed ship’s service diesel generator (SSDG) repairs.
0-5 years of experience
Performed testing, repairs, wiring, and general electrical maintenance on towboats
- Installed and repaired lighting, motors, and alarm systems
- Responsible for connecting shore power to towboats
- Followed established workplace rules and regulations for electrical safety, fall protection, and confined spaces
- Participated in all safety initiatives regarding compliance to support and optimize company programs
- Performed appropriate lockout/tag out procedures to ensure the safety of all employees
0-5 years of experience
Sole crew electrician supporting underway operation of vessel in dredging operations. Employed hand tools, meggers, multimeters, nut drivers, technical manuals, line drawings and specifications to troubleshoot electrical and electronic equipment and power distribution systems.
- Repaired lighting circuits, AC motors, and controllers up to 700 hp.
- Troubleshot system overloads and evaluated protection devices such as limit switches and circuit breakers.
- Overhauled sound powered phone system, refurbishing components.
- Communicated with contract representatives installing state of the art electronics systems.
6-10 years of experience
Electrical assembly and inspection of assorted yachts: 370 Sedan Bridge, 340 Amber Jack, 410 EC, 360 DA, 380 DA, 390DA, 420DA, 44DA, 40DA, 380DA. Responsibilities included wiring, installing electronic hardware and the inspection and trouble shooting of all systems.
- Performed New Model Integration on model 38DA.
- Coordinated prints, hardware and wiring changes through our plant Engineering Dept. and PD&E.
- Special instruction work performed on 55 and 58 foot yachts at Sea Ray Sykes Creek Plant Merritt Island (via George Moore Engineering).
0-5 years of experience
Responsible for troubleshooting, repairing and maintaining million dollar ships including switchboard repair, providing shore power to dockside ships and utilizing low to high voltage equipment on vessels.
- Installed, repaired or replaced wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities.
- Maintained ship readiness for deployments for Navy, Commercial and USCG Vessels as a Second Class Electrician.
- Utilized wiring diagrams to wire spider boxes that control shore power and for Welders to operate equipment throughout the ships.
- Worked with civilian contractors on electrical lighting circuits throughout the ships.
- Striped insulation from wire ends and soldered ends to terminals, using stripping pliers and soldering iron.
- Tested electrical characteristics, such as voltage, resistance and phases in circuits, using voltmeters ohmmeters and phase rotation indicators.
- Constructed instrument panels following specifications, using hand tools, rulers, dividers, and power drills.
0-5 years of experience
Installed and fabricate electrical systems in marine grade environments.
- Read Tanker Ship electrical blueprints and apply NEC (National Electric Code) standards through the full range of industrial requirements, including marine and hazardous locations.
- Diagnosed and Repaired electrical controls, industrial motor controllers for High Current 208 and 480 volt systems. Conducted mathematical circuit load computations.
- Assembled, install, test, and maintain electrical wiring, equipment, appliances, apparatus, and fixtures. Installation of conductors, circuit breakers, switches, transformers, and other components.
0-5 years of experience
Installed and tested electrical systems, distribution panels, stereo systems helm consoles on yachts
- Prepared and installed equipment on yachts hard tops, fly bridges and enclosed fly bridges
- PLC and control and distribution panels maker
- Engine room, galley, control, navigation and communication equipment and systems installer
- Refit technician for sail and motor yachts constructed with fiberglass, aluminum and composite yachts
0-5 years of experience
Study technical information in the form of blueprints, schematics, manuals, and other specifications to determine installation procedures.
- Assemble, install, test and maintain HMI, SCADA, pumps, motor controllers, motor operated valves, HFP stations, and AFFF stations.
- Plan layout and installations of electrical wiring, equipment and other fixtures, based on job specifications and local codes.
- Repair and adjust PLCs, generators, and 400hertz stations by replacing worn parts and cards.
- Knowledge of OSHA regulations and lockout tag out procedures.
- Advise management regarding customer satisfaction, product performance, and suggestions for product improvements.
- Demonstrate a basic framework of technical vocabulary and symbols
10+ years of experience
Completed repairs and maintenance work to Customer standards
- Performed Ship Checks to determine scope of work and material
- Planned work and determined appropriate tools and equipment
- Reviewed project drawings to perform installation activities according to specifications
- Routinely supervised teams of up to five people in the field
- Tested and repaired electric motors, variable frequency drives, alarms, and control systems
- Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain readiness
- Manufactured and installed Motor Control Centers, Switchboards, Controllers, Navigation Light Panels and Power Panels
- Tested and certified Flight Deck Power Supplies
- Acted as Customer Liaison during complex overhauls
- Traveled world-wide to support customers, alone and as part of a team
0-5 years of experience
Team Leader – Supervising and quality control including Planning, Installation and commissioning of AC and DC Systems and equipments
- General office duties – Documentation of work performed, hours and materials used, and purchase orders for consumable materials.
- Development of more efficient systems and installation methods to simplify and systemise the wiring of client vessels.
- Maintenance of vessel schematics throughout project and commissioning test process on all contracts.
6-10 years of experience
Responsible for AC and DC Marine Electrical Systems
- Electrical Maintenance and repairs for Commercial Fishing and other vessels.
- Installed, maintained and repaired both satellite and terrestrial navigations and communication systems
- Gained experience in the building and repair of both fibre glass and wooden vessels.
6-10 years of experience
Team Leader for a 10 man crew and scheduled and budgeted work crew hours.
- Installed multiple types of cables that are used on naval ships that ranged from electrical and communications.
- Used torch to cut steal and performed Stick Welding as needed.
- Able to read blue prints and utilized hand tools and testing equipment.
- Prepped cables and conducted walk through for following day.
- Repaired, installed, replaced and tested electrical circuits and cables.
- Followed company’s and Cal OSHA rules, procedures and safety regulations.
6-10 years of experience
Supervised Crew consisting of 7 to 15 personnel.
- Scheduled, planned, coordinated, organized and provided supervision for various types of work on shipboard electrical systems.
- Experienced with a wide range of electronic instruments, including but not limited to, megohm bridge, wheatstone bridge, meggers, ammeters, OTDR, link loss testers, network analyzers and multi-meters.
- Diagnosed, repaired and replaced power equipment and systems, interior communication equipment and systems, motor/generators, lighting, cabling, wiring, electrical hook-up, sonar systems, and RADCON work.
- Planned and estimated material and time required to successfully complete assignments, rip out, installation, alteration, independent inspection, repair, testing/troubleshooting and hook-up of nuclear and non-nuclear equipment.
0-5 years of experience
- Developed leadership skills while learning electrical component installation, hook-up/termination, and testing procedures in the construction of Virginia Class Submarines and Nimitz Class Aircraft Carriers.
- Lead electrical mechanic in the construction of the USS George H. W. Bush. Confirmed that 14 subordinates adhered to drawing and engineering requirements.
- Educational Leave (August 2008 – February 2010)
0-5 years of experience
Offered repair and maintenance services for marine electrical systems.
- Installed updated electronic devices on powerboats and sailboats.
- Prepared cost estimates of repair and replacement tasks and informed customers about same.
- Checked and fixed binding issues of trip shafts and toggle linkages.
- Examined communication equipment and power circuits and corrected wiring defects.
- Changed defective mechanical parts of voltage regulators and engine governors.
- Tested emergency generator batteries and bridge lighting systems on monthly basis.
0-5 years of experience
Installing new cables, following prints to determine the location of cables and equipment to ensure conformance to shipboard requirements.
- Splicing data signal cables assemble multi-pin connectors/ connectors certified.
- Perform submarine reactor interface.
- Cut openings and drill holes for fixtures, using electric drills, hole saws, hole punches and routers.
- Cableway manufacturing, installation, inspection, and certification. Fabrication of MCT’s. Hook up of control panel, sensors, and terminal boxes.
6-10 years of experience
- Wired components of various types of electrical outlets.
- Connected, disconnected, maintained, and removed all electrical services that are provided to all Navy vessels
- Assisted in connecting and disconnecting select piping and ventilation systems.
0-5 years of experience
The above three positions consisted of: * Installing new electrical systems and pulling out old systems.
- Troubleshooting electrical systems.
- Utilizing blueprints and schematics to install and repair electrical systems.
- Experience with welding.
- Work with lighting systems, refrigeration work including re-tubing condensers, work with compressors, and pipe fitting.
- Experience operating a fork lift.
0-5 years of experience
Repair or replace wiring, equipment, or fixtures, using hand tools or power tools.
- Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.
- Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps.
- Work from ladders, scaffolds, or roofs to install, maintain, and repair electrical wiring, equipment, or fixtures.
- Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools.
- Perform installation, maintenance, repair and replacement of marine electrical (AC/DC) and electronic systems.
0-5 years of experience
Communicated with manufacturer technical help
- Performed routine and annual maintenance of customer boat electrical and electronic
- Installed overhead, fluorescent fixtures
- Performed installation, maintenance, repair and replacement of marine electrical
- Provided recommendations for problem resolution
- Assisted customers with estimates for repairs
- Supervise a crew of eight making sure employees follow in compliance with the SOP marine electrical codes
0-5 years of experience
Installed and removing generators on vessels.
- Pulled marine cables throughout vessels, installed new components on generators like fuel switches and tachometers.
- Troubleshooting fire alarm systems and repaired problems.
- Installed, connected and maintain motors as well as change bearings and cleaning.
- Ran and properly strapped conduit, cables. Removed existing compressors and installed new ones and connected and tested.
- Reading and understanding blueprints. Installed lights and fire suppression systems on vessels above the stove.
- Disassemble, reassemble and installation of buss duct at Army Corp of Engineers bldg. N.O. La.
6-10 years of experience
- Fire and machinery alarm installation and commissioning.
- Electromechanically installed, hooked-up and operated 75kva Gensets at 208vac.
- Monitored and interpreted readings from instruments such as ammeters, voltmeters, temperature and indicating meters and electronic devices.
- Installed and hooked-up electronic switchgear components such as bus ties, power transfer controls, transfer switches, circuit breakers and rheostats.
- Supervised and assisted in the installation and electrical termination of four Cummins diesel generators with an output of 19 megawatts each.
- Supervised and assisted in the electromechanical installation and termination of 3250kva transformers at 690vac.
- Supervised and assisted in the electrical installation of water tight doors and electric drive motors.
6-10 years of experience
Oversaw journeyman-level electrical projects aboard U.S. Navy ships
- Highly motivated to take any classes available to update work skills
- Installed and maintained high voltage systems, power cables and control systems
- Demonstrated expertise in hook-up, fire watch, blue print reading, and AC-DC Theory
- Lay out, installation, and removal of electrical equipment according to Blue Print
- Displayed commitment to meeting exact navy standards and specifications
- Highly commended by supervisor for completing large projects ahead of schedule
- Recognized for speedy set-up times and high hourly production output levels
- Received Letter of Appreciation from Navy Commander, Mr. T.J. Kilcline, Jr. expressing sincere appreciation for exemplary service onboard the USS George Washington (CVN 73)
6-10 years of experience
Oversaw journeyman-level electrical projects aboard U.S. Navy ships
- Highly motivated to take any classes available to update work skills
- Installed and maintained high voltage systems, power cables and control systems
- Demonstrated expertise in hook-up, fire watch, blue print reading, and AC-DC Theory
- Lay out, installation, and removal of electrical equipment according to Blue Print
- Displayed commitment to meeting exact navy standards and specifications
- Highly commended by supervisor for completing large projects ahead of schedule
- Recognized for speedy set-up times and high hourly production output levels
- Received Letter of Appreciation from Navy Commander, Mr. T.J. Kilcline, Jr. expressing sincere appreciation for exemplary service onboard the USS George Washington (CVN 73)
0-5 years of experience
Replaced defective wiring on connection boxes, power panels, and MCC’s
- Worked as a team leader.
- Ensured timely accomplishment of all tasks.
- Reassembled and tested equipment after repairs.
- Worked on 4 newly constructed ships. (USNS Washington Chambers, USNS William McLean, USNS Medgar Evers, USNS Cesar Chavez)
- Worked on 2 US Navy ships. (USS Pearl Harbor and USS Comstock)
0-5 years of experience
Terminate, Trouble shoots, execute, electrical equipment, and circuits using appropriate test equipment to detect problems.
- Required maintenance, repairs and replacement requirements.
- Performs maintenance and repair of generators, switchboards, controllers, circuit breakers, distribution panels, fire alarm install, alarm and lighting circuits.
- Conducts insulation resistance measurements of electrical cables to determine condition and effects repairs or replacements as required.
- Participates in the installation and alteration to electrical systems aboard ferries.
- Maintains adequate inventories of electrical spare parts and requisitions replacements as required.
- Maintains electrical system maintenance histories notating date and lock out circuit breaker protocol.
- Assists the marine engineer in the preparation and inspection of electrical repairs.
0-5 years of experience
Install and repair electrical systems and components including cableways, magnetic motor controllers, motors, limit switches, proximity switches, transducers, solenoid valves, limit torque valves, transformers, circuit breakers, and load centers
- Interact daily with other trades to complete service computation dates, formal work packages, control work packages, and maintenance procedures before their deadlines
- Skillfully craft multiple connectors including multi-pin connectors, Ethernet connectors, and coaxial connectors
- Install Programmable Logic Controllers
- Diagnose malfunctioning systems, apparatuses, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem
- Advise management on whether operation of equipment could be hazardous and provide engineering resolutions for system problems/changes
- Perform complicated tasks such as tracing floating grounds and rebuilding magnetic contactors
- Train peers on proper wiring methods and general safety
- Frequently lift and transport heavy equipment and material in excess of 50 lbs., up and down numerous flights of stairs
- Employ several technical manuals, including but not limited to NAVSEA Standard Items and Electrical Plant Installation Standard Methods (E.P.I.S.M.)
- Earn excellent marks on evaluations from Epsilon Systems for my performance on PLC installs on weapons elevator 5,6, and 8
0-5 years of experience
Install or replace cable wires, equipment or fixture using hand tools, working on ladder, or scaffold, roofing to maintain cable and hook ups.
- Assemble, maintain cable wires, electrical devise, and load and unload material.
- Inspect ship compartments to meet electrical standards in upcoming inspections.
- Coordinate Health and Safety policies and procedures over Nassco shipyard.
- Maintain log sheet for inspections and following up with supervisors for work order.
0-5 years of experience
Installed commercial facility electrical systems, repair and replacement for 2 buildings along with replacing and updating new equipment on board 10 different naval vessels.
- Installed electrical systems control to include three phase 480 volt motors, transformers, 277 volt lighting systems, and fire alarm systems
- Installed main switch gear panels for buildings
- Upgraded Naval bridge marine controls to include maneuver ability, rudder controls, missile controls, and navigation.
0-5 years of experience
Tested the installation of various power cables, distribution panels, connectors, switches, terminals, lighting and electronic equipment on newly constructed naval vessels.
- Wired complex peripheral equipment and circuits used in ship’s navigation and combat systems.
- Install switchgear control room equipment on newly built Aircraft Carrier.
- Conduct profound testing on installed systems to ensure proper installation and documentation was entered into the ship’s permanent records.
- Used diagrams, schematics and drawings to connect and properly check system layouts.
0-5 years of experience
Perform Installation and tear out of various electrical equipment on INLS units.
- Planned, layout and install electrical wires to various controllers and DC motors.
- Repurpose and reroute cables for multi-use in various Switch Gears.
- Instal CAT5 cable for installation of Prosoft Computers.
6-10 years of experience
Install multiple types of cables that are used on naval ships that range from electrical and communication cables.
- Welding (use torch to cut steal)
- Used hand tools and testing equipment.
- Management prepare following cables for the following day. Do a run through on the next task at hand to prepare the run in a more proficient job.
- Scheduling and budgeting in charged of hours that given to me. Creating a plan for the most productive work for each task.
- Able to read blue prints, which allows comprehension on the task at hand. Having a experienced in depth knowledge of reading blue prints I was in charge of reading and caring out the plans (for 5yrs).
- Extraordinary judgment and communication experience. My role as a Team Leader I was required to make the right decisions for every task and problem that arises. Communicating with my team I am able to inform every task in detail so each cable run will go smoothly with every man knowing their jobs and right jobs are allocated to the right people.
- Team Leader for a Ten-man crew. I was to supervise, instruct my crew.
- Repair, installs, replaces and test electrical circuits or cables.
0-5 years of experience
Performs routine checks of electrical equipment including indicators, motor controllers, and wiring
- Use ohmmeters, multi-meter, meggers, and ammeters, to trouble shoot equipment and circuits to make sure they are working properly
- Experience with PLC’s, VFD’s, contactors, and relays
- Knowledge of 120, 220, 277, 480, 600 VAC and 12, 24, 36, 48 VDC
- Read and understand electrical blueprints and schematics
- Ensure the safe, efficient and effective operation for connecting 480V shore power and kilowatt hour meter to ships shore power plug
- Frequently troubleshoot system failures and analyze problems to ensure proper operating condition on AC/DC systems
- Assure the proper maintenance is preformed on electric motors, generators, machinery, alarm equipment, and hydraulic control systems for optimum performance
- Install, operate, and energize breakers, transformers, switchgears, disconnects, and other related substation equipment
- Install, troubleshoot, adjust, replace, and perform preventative maintenance on electrical systems
10+ years of experience
Assembled multi-pin connectors and fiber optic connections
- Reassembled and test equipment after repairs
- Installed new fuses, electrical cables, and power sources as required
- Spliced wires with knives or cutting pliers, and solder connections to fixtures
- Tested electrical systems and equipment to locate and diagnose malfunctions
- Performed necessary duties in the workshop, in the field and onboard vessels
- Repaired and replaced electrical equipment on marine applications
0-5 years of experience
Main Control System (MCS), termination, and testing on board DDG 52, and DDG 62
- Fuel Control System (FCS), termination, and testing on board DDG 52, and DDG 62
- Installation of MK 25mm Gun Mount on board USS Essex, AFFF skid Modification, Battery pack and Snap Switch H/U, equipment mounting
- Install of un-manned drone combat center onboard USS Anchorage (STUASS)
- Damage Control System maintenance onboard various DDG’s and CG’s
0-5 years of experience
Knowledge of departments within place of business
- Troubleshooting of circuits and components within yachts
- Fabrication of items to consumer’s request
- Knowledge of electrical and electronic systems within yachts
- Knowledge of power systems in both AC and DC & 12v/24v)
0-5 years of experience
Splice wires with knives or cutting pliers, and solder connections to fixtures, outlets, and equipment.
- Reassemble and test equipment after repairs.
- Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers.
- Install fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools.
- Confer with customers to determine the nature of malfunctions.
- Install new fuses, electrical cables, or power sources as required.
- Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.
- Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician’s tools.
- Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software.
- Maintain equipment service records.
- Wiring casino boats and supply vessels-100%.
0-5 years of experience
- Perform preventive maintenance for up to 300 generators
- Work with load banks and A/C equipment
- Wire field combat operations command sites and/or entire camps to generators to provide electricity for field combat training operations for other battalions.
- Provide generators and electrical equipment to support rescue operations for hurricane Katrina and other natural disasters
- Entrusted with special duties as result of exceptional handling of routine tasks and other assignments
0-5 years of experience
Operation of various tools used for electrical installation
- Reading and understanding blueprints
- Running and terminations of electrical cables to proper panel and switchboard locations
- Connection of lighting, single and 3 phase motors, and 24v battery banks
- Maintaining and complying with OSHA standards
- Proper lockout/ tag out of equipment
- Testing and inspecting mechanical and electrical connections
0-5 years of experience
Heavy lifting, climbing, and carrying equipment
- Perform routine and annual maintenance
- Trouble shooting problems for customers
- Provide recommendations for problem resolution
- Perform installation maintenance, repair and replacement of marine electrical (AC/DC) and electronic systems for Department of Defense (USS Reagan, USS Freedom, & others).
- Advanced knowledge of EMT and Rigid conduit
0-5 years of experience
Able to do Initial Voltage Verification.To read Electrical Schematics. Utilize hand tools for installation.
- Utilizing of Hand tools for various job duties
- Assisting with other personnel to complete various jobs.
- Reading of various maps to find job sites, and to set up for low voltage verification
0-5 years of experience
Removed & installed new motors for deck seats on yacht named the Touch
- Wired touch pad controls, motors
- Atlas system repairs on Westport yachts
- Repair of davots, passerelles on Ferettin yachts
- Went to Tampa for owner performed refitt on 110ft USCG cutter vessel
- Hydraulic systems overhauled stabilizers, steering.
- Installed TLI units
6-10 years of experience
Prepare and install electrical cables for fiber optics aboard vessels
- Troubleshooting of electrical components on vessels
- Read blueprints to ensure proper installation of equipment
- Review, markup, and discuss discrepancies in construction documents in the field
- Train new hires and proper tool and equipment safety and usage
- Conducted daily toolbox safety meetings
- Utilized and managed an assortment of hand and power tools
Electrical Cover Letter Examples
Rate This Article
[Marine Electrician]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
