- Featured in:
-
More Engineer Resumes
Use these Engineer samples as a guideline or visit our extensive library of customizable best resume templates.
Select
Customize
Download
Looking for cover letter ideas? See our sample Engineer Cover Letter.
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Engineering Resume Samples
Engineer Resume Samples
No results found
0-5 years of experience
Manager for Manufacturing Engineering, Test Engineering and Industrial Engineering for the leading provider of aircraft fire detection and suppression systems.
- Increased sales from $53M to $81M without increasing the workforce.
- Developed workflow and cells for a new series of products.
- Brought Lean and Design-of-Experiments training to the whole organization.
- Led machine shop improvement program implementing new CNC equipment.
- Implemented an automated circuit card assembly facility, reducing costs 40%.
0-5 years of experience
Observed the German engineering design and procedures of production and quality under mentorship
- Created professional network for technical knowledge of operation and techniques of CAPL
- Implemented a new method for handling strip breaks in furnace which resulted in a 62 % reduction in time from 8 hours to 5 hours
- Reported daily activities to Team Manager on observations
0-5 years of experience
Re-designed, deployed and maintained LAN and WAN corporate network infrastructure for [company name] offices in Bay Area. The infrastructure provided network interconnectivity to [company name] Global network infrastructure and [company name]’s trusted partners.
- Designed and deployed remote access service (RAS) for West Coast users using Cisco 2500 router and Shiva dial up service.
- Monitored and analyzed network traffic and performance using Network Associates Sniffer Pro LAN.
- Provided tier-4 escalation for any network and system problem for [company name] Information Technology in Bay Area offices.
- Designed and integrated West Coast office teleconferencing systems using Polycom and Picture Tel Video Conferencing systems into the [company name] Global Corporate Teleconferencing Systems.
- Designed department intranet web site using FrontPage 98 application.
0-5 years of experience
- Was responsible for generating computer based design reports using Ms. Excel thereby saving the time consumed for traditional paper work
- Created lean designs that reduced around 15% of costs required to procure the material
- Was on the only engineer in the organization who prepared designs and generated drawings using AutoCAD without the aid of an AutoCAD Drafter.
- Hailed by the Project Manager for always ensuring timely completion of projects and consistent implementation of design specifications
- Coordinated with the Engineering department, vendors and subcontractors for information and deliverable’s
0-5 years of experience
Implemented an automated scalable flat-file reporting system operating on large log files
- Designed and implemented landmark tools and APIs to interpret customer log files
- Provided internal training to customer support in using developed tools
- Acted as the primary Tier-3 support engineer for several months
- Helped maintain a powerful and highly efficient multiplatform tool for system backups and restores
- Helped maintain Apache and WebDAV extensions for our backup software
- Designed and implemented a powerful API for backing up and restoring Windows security attributes
0-5 years of experience
Generated a total of $800K/year in revenue from project cost savings and bid analysis
- Managed the installation of a $250K hot oil system
- Managed appropriate skilled team members that maintained project deadlines
- Presented project updates and project schedules to managers monthly detailing project status
- Applied six sigma ISO 9001 quality policy & lean manufacturing toward all projects
- Discussed Solid Works projects with machine shops informing fit, form, and function
- Wrote capital project and weekly reports detailing return on project investments
0-5 years of experience
Created CAD drawings of in-flight simulator modifications to be performed on
Calspan Lear 25 series aircraft.
- Performed stress analysis calculations of refueling probe attachments to Learjet nose.
- Assembled an instrument rack in 3D CAD, ensured all connections surpassed
- Modified a CH-47 SAS actuator manifold using 3D modeling.
- Internship was scheduled to last 3 months, ended early after 3 weeks due to being
0-5 years of experience
Tasked with the integration of quality projects providing technical support to all operations and continuous improvement functions to build a robust production operation that was responsive, flexible, and predictable and consistent to improve manufacturing flow, process control and efficiency
- Managed the implementation of preventive maintenance programs and procedures for all tools and production equipment
- Monitored production department performances to prevent deviations from operating standards vs. actual production rate
- Contributed on process analysis and risk assessment studies to reduce work related injuries 20%, and trained technician on the proper application of safety protocols, procedures and practices
0-5 years of experience
Assisted in the development, coordination and implementation of unit training to include serving as the range safety officer for over 75 live fire ranges with a perfect safety record.
- Provided oversight of all unit training
- Supervised and added technical input to unit daily operations
- Reorganized the logistics and supply structure of the Battalion’s Headquarters and Service Company
- Served as the representative for the engineer field doctrine review and rewrite
- Tested and evaluated various engineering systems
- Developed training schedules and logistical support to ensure all personnel remained combat and deployment ready
6-10 years of experience
Performed sustaining engineering activities for a family of electro-mechanical switches used primarily in the appliance industry.
- Designed a pushbutton version of the membrane switch using existing internal components.
- Designed an actuating mechanism that increased the switch’s circuit capability from a SPDT device to a DPDT device.
- Initiated design changes to reduce assembly costs and improve the quality of the product.
- Wrote a computer program that established the circuitry layout, and components needed, based on the customer’s requirements.
- Evaluated and tested different contact materials to increase the electrical capabilities of the switch.
0-5 years of experience
Reviewed contractual documentation to identify applicable product and process requirements.
- Generated assessment plans and time/cost estimates.
- Coordinated with the appropriate personnel to perform audits to assess compliance with requirements.
- Requested and obtained corrective action(s) to assure compliance with requirements.
- Designed and implemented automated tools (C/C++) to perform static analysis of software products to ascertain compliance with requirements.
- Developed applications (database) for processing software quality assurance data and audit results for management purposes.
10+ years of experience
Engineered and implanted new camera surveillance system to maximize security of a Naval Weapons Station
- Supervised electrical teams during installation of electrical equipment
- Configured, installed, repaired and tested electronic equipment on various naval ships
- Conducted preventive maintenance on low and medium voltage power disturbance including transformers, switchgear and breaker operation
- Conducted preventive maintenance of PLC controller, heavy equipment and various generator systems i.e. gas turbine and diesel and other various naval vessels
- Facilitated electronic training programs to improve organizational effectiveness
- Designed and installed audio/video systems on various Naval ships including CCTV, Satellite Television and Telecommunications
0-5 years of experience
Responsible for Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) relative to Quality Engineering. Customer interface through launch and production.
- Managed and coordinated the APQP (Control Plan, Process Flow, PFMEA, Work Instructions) and PPAP activities for new model year parts and engineering changes.
- Reviewed incoming gauges and fixtures, and performed GR&R and capability studies.
- Managed customer concerns and issues utilizing multiple root cause analysis and corrective action tools.
- Facilitated cross functional Continuous Improvement teams to improve production process.
- Assisted in the supervision and training of 18 Quality Auditors to ensure quality product was being produced and any concerns were quickly dealt with.
- Assisted in the training of operators relative to customer expectations and quality issues.
0-5 years of experience
Wrote several procedures that helped gain FDA approval of a start-up medical device company producing ETO sterile devices ready for operating room use.
- Communicated with over 150 dental surgeons and designed over 600 successful Custom TMJ implants.
- Co-Designed TMJ system instrumentation and provided primary and back-up screw sizes for each case.
- Attended several surgeries with leading dental surgeons to develop new TMJ instrumentation.
- Learned Solidworks Software and in a few weeks was creating advanced features.
0-5 years of experience
- Utilized extensive programming skills while working on the Digital TV project designing and implementing the browser TV programs module
- Successfully analyzed and optimized the algorithms and performance for scaled TV programs, reduced 70% memory usage
- Worked on the Home Network Player project, with project completed on time, under budget and exceeding expectations
- Served as configuration manager managing documents, code and baseline configuration during the entire software lifecycle
- Technologies used: WPF, C#, C++, MFC, SQLite
0-5 years of experience
Provided Level-2/3 support and troubleshooting to resolve issues. Worked within established configuration and change management policies to ensure awareness, approval and success of changes made to the network infrastructure. Selected and implemented security tools, policies, and procedures along with the company’s security team. Liaised with vendors and other IT personnel for problem resolution.
- Configured and installed various network devices and services (e.g., routers, switches, firewalls, VPN, QoS, WAN Accelerators)
- Routing Protocols: BGP, OSPF, EIGRP Route filtering, preference control, redistribution and aggregation-IPv4 and IPv6 (management, implementation), MPLS, and VPLS
- Performed network maintenance and system upgrades including service packs, patches, hot fixes and security configurations
- Monitored performance, system resource utilization, trending, and capacity planning and ensured system availability and reliability
0-5 years of experience
Assisted Project Manager in directing technical activities of projects
- Controlled project budgets and schedules for several projects ranging from $1M to $30M.
- Developed monthly progress reports for clients
- Ensured that construction and procurement packages met quality standards before issuance
- Prepared and reviewed scopes of work for contractors
0-5 years of experience
Provide technical support and customer service for NetApp clients. As a Technical support engineer I am committed to diagnosing, reproducing, and fixing customer software and hardware issues. Troubleshoot protocols running on NetApp hardware to assist customer with problem isolation and resolution. If requested, escalate the customer’s case to a subject matter expert.
- Research client’s issues in a timely manner and follow up with the customer with recommendations and action plans.
- Participated in team meetings weekly, ask questions and provide input on case backlog, technical process, and new processes within the department.
- Mentored new engineers by answering technical questions, escalating cases, and teaching detailed process development.
- Provide root cause analysis for customer’s storage appliance failure.
- Trained with senior system engineers to enhance my personal technical skills as a Technical Support Engineer and learned internal process for escalating cases and approving or denying handovers to specific verticals.
- Utilize previously acquired technical experience to become actively involved in day-to-day technology team to meet schedules and resolve problems.
0-5 years of experience
Lead technical trainer and writer for administration and advanced administration documentation and curriculums within the Integrated Product Team (IPT)
- Assisted in statements of work, delivery order modifications, and contract review
- Monitored and tracked project budget components to ensure contractual requirements maintained
- Developed and delivered the users, administrative, installation, planning, diagram, and training materials for over 4 product lines
- Delivered several items as part of the “red team” in order to save company budget and meet requirements for customer satisfaction
0-5 years of experience
- Evaluated manufacturing quality issue regarding designs, materials, processes and assemblies
- Reviewed engineering drawings to evaluate machining process and meet specifications and tolerances
- Managed communication with engineering, quality, customer service, logistics, suppliers and vendors
- Participated in VAVE project for hydraulic transmission to reduce cost and improve functionality
- Maintained $1.5mil revenue for 2 customer accounts by ensuring delivery and quality performance
- Assisted in product development of gear pump assembly and testing by reviewing CAD models and schematics
0-5 years of experience
Acted in a technical account manager capacity for a major client, as the sole point of contact for this client with a customer base of roughly 500 sites. Provided technical assistance to the vendors technical support team when warranted.
- Worked directly with engineering, sales, and product management to research and resolve customer issues, to ensure a quality product was delivered to the customer. Reproduced all issues reported by customers, and tested all resolutions before turning over to customer
- Performed QA testing on new releases of the product and service packs to ensure quality.
- Reviewed specifications and technical documentation for technical accuracy.
- Wrote and tracked PARS for engineering to ensure that any issues were corrected in a timely and efficient manner. Conferred with engineering on these issues and developed a course of action for moving towards resolution.
- Wrote test plans for beta releases.
- Conducted surveys on the new release to elicit feedback from customers.
- Participated in specification and code reviews
0-5 years of experience
Supervised and instructed a team of operators to successfully operate and manage a newly developed equipment for deployment in their district
- Worked with groups of associates comprised of various cross functional teams to develop, execute and modify test procedures for new technologies
- Managed the logistics of the personnel, third party contractors and equipment for test site location
- Tested and evaluated new equipment for oilfield water treatment and both mechanical and chemically enhanced separation of drilling fluids
- Used engineering/technical principles to solve each unique problem that’s encountered during the verification process of new technology to ensure the tests meet the planed deadlines
- Collected, reviewed and evaluated test data to write reports which are delivered to multiple management levels (VP’s, Directors, Sr. Managers and Managers) to determine the direction of new technologies in development
- Collaborated with associates to write operating procedures for pilot testing and sampling for implementation as a company standard
0-5 years of experience
Designed and altered hydrogen fuel cells for the automotive industry using Autodesk Inventor
- Designed parts, selected suppliers, sent Purchase Orders to suppliers, received and inspected delivered parts, assembled and led others to assemble sub-assemblies and full units, installed units in automobiles and trucks
- Tested, researched, and developed new iterations of the hydrogen fuel cells
- Performed environmental impact assessments for the trucking industry
- Hands on experience included production, installation into cars and trucks, and bench testing
- Trained and supervised assemblers and installers
0-5 years of experience
Inspected project sites to monitor progress and adherence to design specifications, safety protocols and foundation installation conditions
- Visited project sites during construction to monitor progress and consult with contractors and on-site engineers.
- Reviewed calculations and analytical data to maintain accuracy of the technical reports.
- Involved in report preparation of geotechnical logging for a proposed pipeline, crude oil storage and marine
- Prepared specifications and construction drawings for the reconstruction of a tank lot ground surface and surrounding Dyke, Ramp and Sump area.
- Worked on tank pad design and containment system for tank farm and calculated tank expected settlement
0-5 years of experience
- Designed and built test fixtures to assist scientists in experiments
- Used SolidWorks to create 3D models of test fixtures and concepts
- Tested and collected data on automated Biodetector System, verified accuracy and precision of volume dispensing and recorded common failure areas
- Analyzed collected data and made adjustments in the software and hardware of Biodetector System to reduce malfunctions
- Programmed microcontrollers to assist in testing systems and data acquisition
0-5 years of experience
Assisted colleagues in the areas of Solid Edge ST4 and vertical 5-axis machining
- Delegated critical thinking and problem solving methods to approach specific subject matters for easier understanding
- Developed and implemented procedures for machine set up, machine load of material, and machine operation
- Created assignments for colleagues to use as tutorials for their Solid Edge self-advancement
0-5 years of experience
Applied wide range of engineering design and analytical theory, principles, techniques, and practices to a complex portion of a technical project.
- Created, planed, and performed complex engineering design, development, analysis,
- Applied broad knowledge of the design of the organization’s products, technology, and systems interactions to solve complex engineering problems which have not been clearly
- Developed and wrote technical documentation, makes revisions to existing
- Performed technical analysis, testing, calculations, and evaluation of results to solve
- Provided input and status to project leaders on technical content, cost, schedule, and workload requirements.
- Developed and maintained effective relationships with customers to resolve complex
0-5 years of experience
Designed, documented (high-level/low-level requirements), using DOORS, peer reviewed.
- Developed PCI/DMA/1553 drivers and communications software (C/Ada95) for graphics display,
- Wrote embedded /Linux dynamic device drivers and Board Support Package (BSP) for PowerPC (MCP5554) based SBC. Implemented various FMS, and NAV components (Ada95).
- Performed hardware/software integration (Lauterbach debugging tools), component tests, static analysis tests, SW/SW and HW/SW integration testing. Subsequently created and executed formal DO-178B Level A tests.
0-5 years of experience
Utilized as Lead Test Engineer on VHF product line including 2.5GHz source generator and 1GHz digitizer.
- Led continuous improvement teams to solve design and manufacturing problems using the 7 and 9 Step Quality Improvement Process.
- Worked with cross functional teams to further improve product yields.
- Directed 14 engineers and technicians to ensure completion of time sensitive priority boards.
- Developed and communicated design changes and ideas to Design Engineering through Engineering Change Orders.
- Attended all design reviews to assist Design Engineers to develop and construct designs for manufacturability.
0-5 years of experience
Process Engineer on several biotechnology facility design projects. Applied engineering principal in design and commissioning phases of project
- Developed specifications for the long lead equipment and evaluated vendor proposals.
- Participated in FATs and commissioning activities
- Coordinated activities with other project disciplines during design, construction, and start-up.
- Lead CIP and SIP development and Validation efforts in Fermentation and Harvest areas.
- Optimized CIP cycles to reflect process flows, increase efficiency, and decrease water usage and waste production.
- Reviewed and updated DeltaV code as needed for CIP and SIP cycles and worked with Controls Engineers to implement and test changes.
- Assisted, tested, and validated process and equipment modifications per client needs.
0-5 years of experience
Oversaw a project team in order to allow focus while removing areas of conflict and delay
- Worked to combine the best features of many delivery systems today; including design-led design-build, open book cost plus, GMP, reduced timeline and strong budget control
- Trained and managed several laborers in their job duties required daily and achieved significant improvements in their productivity
- Visually inspected equipment by tightening fittings, repacking bearings, ect.
- Supervised several employees, scheduled work hours, resolved conflicts
- Successfully handled getting the job completed efficiently and safely
- Structured and maintained a good work environment
- Purchased and ordered materials on a weekly basis or as needed pertaining to each job
0-5 years of experience
Worked in a company which focused on high integrity systems development including systems, hardware, software and safety engineering in aerospace, automotive, rail and other niche domains.
- Performed Design Scrutiny and Tested modules based on the Requirement for Landing Gears Extraction and Retraction System (LGERS) for Airbus-380 using IBM Rational Test Real Time Software suite.
- Developed functional modules for LGERS for Airbus-380 using C and C++ Programming.
- Developed and executed test cases using IBM Rational Test Real Time Software suite for Code coverage analysis and Modified Condition/Decision Coverage.
0-5 years of experience
- Managed sales accounts of key customers in a multi-million dollar sales territory for manufacturer of specialty fasteners and hardware for computer and electronics industry
- Increased sales over 100% for year 2000 over year 1999
- Provided engineering consultation to customers and aided clients such as Compaq, HP, and MCI in selecting products to meet their specific engineering needs
- Collaborated in development of custom and modified products and served as engineering liaison between clients and engineering department
0-5 years of experience
Prepared project budgets including engineering, lab technician and drafting hours, fabrication and manufacturing costs, additional resource costs, testing/qualification costs.
- POC for manufacturing nonconformance issues for the subsea actuator product line.
- Combined 15 separate sub-sea actuator designs into 5 hybrid actuators that reduced inventories, standardized parts, and ultimately reduced costs by 25%.
- Designed a linear override mechanism that is deployed by an underwater robot (ROV).
- Designed test fixtures in order to study the effects of external pressure on various components using data acquisition hardware and software.
- Wrote test reports, design documentation, test procedures, assembly procedures, geometry standards, design guidelines and FEA reports
0-5 years of experience
Led investigation team to analyze and improve manufacturing and documentation of critical products for future engineering change notice (ECN) protocols.
- Oversaw complete design of pre-production prototypes: computer renderings, customer approval, detailed drawings and fabrication.
- Conceptualized and created solid models for finite element analysis (FEA) and manufacturing documentation.
- Directly supervised one mechanical engineer including end of year performance reviews and work load.
0-5 years of experience
Analyzed pre-release global products virtually during development to ensure vehicle serviceability by repair technicians without issue. Responsible for identifying potential service issues that may cause unnecessary time and cost due to difficulties involved in obtaining and or replacing faulty components on vehicle product.
- Ensured that programs and products in development were in compliance with service specifications.
- Reviewed over 10 programs including HD trucks and extended range electric vehicles to ensure current designs meet satisfactory criteria.
- Collaborated and supported 5-10 Service Engineers in Drive train and Power train departments to obtain relevant data on serviceability.
- Contributed to the development of 3D models to evaluate serviceability.
- Identified labor cost issues during analysis that highlighted areas for potential cost savings. Costs would be lowered due to service visits resulting in less labor time associated with repairs.
- Validated virtual serviceability issues, using NX5 and Visual Mockup software to conduct studies.
- Assisted in developing virtual models for fluid flow from vehicle involving oil drainage concerns.
- Knowledgeable with Teamcenter Community to obtain current projects and assignments.
0-5 years of experience
- Conducted daily engineering and administration of Windows NT / 2000 Server / Novell Netware 4.x / 5.x environment running in a large e-Directory/NDS/NT environment on HP hardware.
- Performed daily administration and engineering of Citrix Winframe / Metaframe XP environment running on HP DL580 Server hardware.
- Citrix coupled with Nortel VPN allowed remote access to external clients.
- Solely designed, tested and documented all Windows server operating systems and application minfrastructure to hand off to daily Windows operations staff.
0-5 years of experience
Delivered complete design and calculations on a variety of projects located in high seismic zones, high snow, and high wind areas in accordance with design specifications and current building code requirements.
- Designed and analyzed components used in steel buildings including: masonry lintels, portal frames, and fixed based columns, also reinforcement of existing structures for building additions and new loads (i.e., monorail/under hung/bridge / jib cranes, mezzanine, and roof top units).
- Assessed and completed estimates for primary steel framing on all types of structures.
- Codes used: AISC, AISI, ANSI, ASCE 7, BOCA, IBC, SBC, CBC, and UBC.
0-5 years of experience
Involved in commissioning, qualification and validation of Solid dosage pharmaceutical drug manufacturing equipment.
- Developed and executed validation protocols for manufacturing and process equipment like Rotary Mills, Bin Blenders, Tablet Dedusters with Integrated Metal Detectors, Tablet Presses, Filling Machine, Fluid Bed and High Shear Granulators, Capsule Polishers and Tablet Film Coaters.
- Involved in Pre-validation (Equipment Qualification) and Process Qualification phase to assure that process will consistently give desired results.
- Prepared SOPs for equipment using Business Requirements Document (BRDs) and Functional Requirements Document (FRDs) of the system under company regulatory system.
- Involved in execution of validation protocols IQs and OQs for process equipment to assure equipment is properly installed and operating as specified and designed.
- Experience in calibration, maintenance, troubleshooting of process components, and analytical tools in a timely, efficient manner to ensure safety and operational upkeep.
- Maintained and updated Requirement Traceability Matrix (RTM) to track requirements that correlated with the conducted tests.
- Checked the compliance of Electronic Records and Electronic Signatures in compliance with 21 CFR Part 11.
- Generated final Validation Summary Report (VSR) to summarize testing results and conclusion.
0-5 years of experience
- Certified engineer for the [company name] and completed hundreds of repairs to ship
- Over 4000 plus hours working hands on with mechanical
- Supervised and trained lower ranking personnel on planned
- Qualified security rover/ guard, both on land and sea.
0-5 years of experience
Support daily operations as a Manufacturing Engineer in Assembly environment.
- Creating and maintaining standard work, processing and implementing ECN, create and manage work orders and Engineering deviations and develop logistics plans for material delivery.
- Analyzed space requirements, planned, developed and implemented assembly line layout to facilitate optimal production flow.
- Implemented torque control program on the assembly line and integrated torque tooling in the Standard work.
- Created Value stream maps and identified communication circles to assist in removing waste and process discontinuities, analyze Takt-time vs. Cycle-time, implement line balance and reduce non-value added elements.
- Implemented root cause and corrective analysis (RCCA) on material availability at point of use (POU), supplier and incoming material quality and engineering changes.
6-10 years of experience
A manufacturer of electro-mechanical machines for the electronic circuit board assembly industry.
- Managed fifteen direct reports and responsible for over-all regional performance and development.
- Administered financial forecasts including yearly budgets, and manpower planning.
- Developed business relationships at various levels through customer visits and correspondence.
- Managed warranty costs and department expenses to budget.
- Negotiated service contracts, aftermarket sales proposals, and other value-add services with customers.
- Maintained site-specific issues lists including action plans for resolution.
- Adhered to ISO 9001 compliance standards.
0-5 years of experience
Design and program automated control systems, including the use of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC) and Supervisory Control and Data Acquisition (SCADA).
- Hardware and Software integration on automated equipment used in manufacturing pharmaceutical environments for capital equipment valued at over $1M.
- Produced and edited control system design documents and FDA validation documentation per GAMP guidelines for the pharmaceutical industry.
- Managed engineer programing consultants, contractors and testing department through project entirety.
- Support field engineers, test technicians, and end users on controls/process related issues throughout the project lifecycle.
0-5 years of experience
- Designed hardware test interface and developed software for a test module to allow testing of a subassembly on automated test equipment.
- Managed and interpreted Technical Data Package (product specifications, schematics and acceptance test requirements) for flight hardware subsystems.
- Collaborated with manufacturing, test and design engineers to minimize failure trends.
- Created engineering proposals for major design changes to present to the management.
- Created and executed design qualification plans for improved designs.
0-5 years of experience
- Provided technical support to the electrical design engineers developing products and circuits used in telecommunication test equipment.
- Designed and fabricated test fixtures for evaluating PCB used in telecommunication test equipment.
- Evaluated and solved problems found in existing designs to ensure shipment of the end product.
- Provided support to Manufacturing via troubleshooting PCB to component level for shipment of product.
- Developed and executed test procedures for evaluating circuits and end product for telecommunication test equipment.
0-5 years of experience
- Operated, assembled, and tested assembly board machines and AutoFormers
- Customized AutoForming pods for Customer companies, GM, Chrysler, and Nyloncraft
- Coordinated with floor workers on a daily basis on wiring and airline plumbing techniques
- Documented and catalogued all parts, tooling, and fixtures for company’s determination of future replacement parts
- Enhanced knowledge of various metals, and hands on skills with molding and metal working
0-5 years of experience
- Cleaned up Exchange Organization and rebuilt Exchange servers and consolidate as needed for growth patterns at that time
- Evaluated and implemented archiving software
- Trained existing I.T. staff & Executive personnel in Exchange and Microsoft products
- Maintained virus scanning software, and updated as needed
- Evaluated and implemented mail restore product (Legato Email Extender)
- Provided assistance to Windows Engineers as needed
0-5 years of experience
Worked primarily with sheet metals that underwent break press bending and welding.
- Made 3d models, detailed drawings, and assembly instructions in SolidWorks.
- Worked directly with manufacturing plant and talked to welders and assemblers to achieve the correct manufacturing processes for desired results.
- Led a project that created fixtures to help parts suffering from quality control inconsistency.
- Added part numbers, made Bills of Materials, and started job orders in Made2Manage ERP system.
0-5 years of experience
Responsible for the execution of core PER and CER routers and switch configurations
- Performed test and turn-up procedures necessary for new site install
- Created and edited router configurations over an MPLS network
- Troubleshoot with local telcos while addressing layer 1 issues
- Effectively communicate with the project management team on technical matters
- Worked with local administration to deliver timely reporting
- Working knowledge of Cisco IOS and routing protocol
Rate This Article
[Engineer]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
