- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Fire Fighting Resume Samples
Fire Alarm Technician Resume Samples
No results found
10+ years of experience
Over 20 years experience and working knowledge of all aspects of fire and security systems.
- Maintained and serviced municipal cable plant to include 57 fire alarm circuits, 15 vocal alarm circuits, approximately 50 fire and police department telephone lines and 20 dedicated radio lines.
- Opened troubleshot, repaired, spliced, and closed multi-conductor cable of all types.
- Assisted and instructed police S.I.B. for and during special operations.
- Supervised and monitored pyrotechnic displays at all indoor venues.
- Answered emergency requests for assistance by telephone and radio.
- Assessed emergency situations to establish correct response.
- Designed, installed, and serviced closed circuit surveillance cameras and security systems for the State Witness Protection Program.
- Installed and removed mobile radios, cellular telephones, and all types of mobile electronics in city vehicles.
0-5 years of experience
Managed the startup of a new Mass-Notification section of Koetter Fire Protection. Installed, Maintained and inspected various Fire Alarm systems in central Texas. Assisted the Corpus Christi branch of Koetter Fire Protection with project management and complex system troubleshooting during management turnover. Collaborated with Engineering, Sales, and Programming departments of Koetter Fire Protection to solve layout, system design, estimations, programming and implementation plans for various fire alarm and Mass-Notification projects at Freescale Semiconductors, The University of Texas at Austin, St. Edwards University, The Texas State Capitol Complex, and the Fort Hood Directorate of Public Works, among others.
- Designed, tested, and installed switching and integration hardware and software for Cooper Wheelock RF Based Mass-Notification Systems and Honeywell Notifier Fire Alarm Systems.
- Managed multiple employees and subcontractors during construction on Mass-Notification pilot integration at The University of Texas at Austin.
- Troubleshot inter-building RF problems across UT Austin Campus, including antennae selection and orientation, signal degradation resolution, and external interference resolution.
- Programmed numerous single and multi-node fire alarm systems using boolean logic commands.
- Maintained the fire alarm fiber optic network and panel integration program during renovations at multiple buildings at Freescale Semiconductor.
- Mapped and repaired 40+ node, multi-building fiber optic network across Austin State School campus.
0-5 years of experience
Responsible for overseeing the Preventative Maintenance program for all Baptist Health System facilities which included the maintenance, compliance and staff education for the Life Safety and Fire Alarm systems. Assumed the Lead role on emergency repairs and supervised work crews during reconstruction and upgrades including estimating costs for needed items.
- Conducted routine and troubleshooting tests of systems daily according to compliance standards including physical check of hardware and software.
- Maintained program documentation, recording all repairs for state and regulatory surveyors; took an active role during inspections.
- Initiated risk assessments and implemented Interim Life Safety Measures as needed to provide a safe environment.
- Conducted in-service training with maintenance and registration staff for use of the fire alarm system.
0-5 years of experience
Inspected and tested fire alarm systems for ADT properties throughout Broward County Florida.
- Tested, inspected & certified over 100 properties in a one month period.
- Brought properties up to NFPA code.
- Generated thousands of dollars in service tickets.
- Prepared proposals, invoices and service reports.
- Performed U.L. inspections & corrections on fire alarm systems.
0-5 years of experience
Updating and maintaining Morenci fire alarm systems
- Trained new employees in proper fire alarm install and NFPA codes
- Coordinated with multiple departments to plan schedules on installs and services that needed to be performed
- Worked with MSHA safety department to ensure that all work was performed to regulations in a timely manner
0-5 years of experience
Worked in groups of 2 to 10 to complete contract based jobs in an efficient but quality oriented manner.
- Catalogued and kept track of tools and equipment on job site.
- Kept list of inventory and negotiated with other companies to keep supply chain operating smoothly.
- Honed interpersonal skills to communicate more effectively with business associates and team members.
0-5 years of experience
Completed assignments accurately in a timely manner
- Provided outstanding customer assistance, ensuring customer understanding of alarm ordinances
- Monitored technicians on various fire alarm inspections
- Administered clear and precise servicing instructions on fire alarm equipment
0-5 years of experience
Prepare or review bid or layout packages to meet the specifications and requirements of clients, design professionals, and AHJs.
- Identify site conditions relevant to fire alarm system layout and correctly identify the occupancy types and codes and standards involved.
- Create or review fire alarm system shop drawings (including power supply) to meet device requirements, job specifications, and codes and standards.
- Ensure all existing buildings were brought up to NFPA72.
- Plan and oversee complete and successful system commissioning, including documentation of test completion and creation of as-built drawings.
- Monitor work practices to maintain safety and comply with environmental codes.
6-10 years of experience
Performed installation, service, testing, inspecting and programming of Simplex Grinnell fire alarm systems
- Performed maintenance, testing and inspecting of various competition fire alarm panels
- Assisted in installation and programming of various fire suppression agent systems
- Programmed and maintained numerous fire alarm networked systems in commercial and industrial environments including food process plants, chemical and paper process plants, various college campuses, prisons, hospitals, school districts and dam and power plants
0-5 years of experience
Residential and Commercial installation of intrusion detection systems, video surveillance, access control systems.
- Assisted in the installation and completion of new residential and commercial CCTV, Access control and Fire alarm projects.
- Supervised and trained new field technicians in running and snaking wires in residential and commercial buildings.
- Mechanical aptitude to read and decipher plans, drawings, schematics.
0-5 years of experience
Wrote compliance and deficiency fire alarm reports after annual fire alarm inspection
- Advised customers on system and component upgrades requirements as per NFPA standards
- Performed repairs after troubleshooting many types of fire alarm systems
- Installed FACP, initiating and indicating devices for system upgrades for analog and digital systems
- Installed and programmed dialers for new or existing systems
- Conducted annual wet and dry sprinkler system inspections complete with deficiency reports
0-5 years of experience
- Conducted fire protection inspection on fire alarm systems and automatic sprinkler systems.
- Communicated with customers and project manager to ensure timely resolution of fire issues.
- Trouble shooting ground faults, open circuits, and minor repairs such as but not limited to (replacing smokes, installing and relocating strobes and speaker, one for one panel replacements)etc.
0-5 years of experience
- Designed AutoCAD Electrical layouts for the cogeneration plant on campus containing three 1 Megawatt generators and automatic transfer switches
- Worked on the controls for an automated boiler system in AutoCAD Electrical
- Installed several campus fire alarm systems in Johnson and Mary Gaston Residence Halls, Beginning and Primary Centers, Academy complex, Rodeheaver Auditorium
- Responsible for executing and documenting yearly testing of all fire alarm systems on BJU campus
- Managed and performed regular maintenance of fire alarm systems
- Documented system layouts in AutoCAD for systems installed
6-10 years of experience
- Installed and inspected fire alarm systems, security alarms, and detection devices.
- Assembled and programmed new panels and equipment
- Performed testing, inspections and maintenance of fire and security alarm systems
- Access Control/CCTV Installation
- Equipment inventory specialist
- Conducted customer software and hardware training seminars
0-5 years of experience
- Responsible for upkeep and maintenance on fire alarm system service on Ft. Gillem and Ft. McPherson. Increased compliance from 60% to 100% in one year.
- Ensured all systems were compliant with NFPA standards.
- Troubleshoot fire panel devices, wiring, and electronic devices such as: keypads for access control to highly secured areas, crash gates and bollards.
- Installed CCTV, card access controls, fiber optic cables and terminated ends for surveillance systems.
- Responsible for reading and interpreting blue prints and drawings.
0-5 years of experience
Measure, cut, bend, threaded and conduit bender.
- Installed residential and industrial fire alarm systems.
- Assisted subordinates and supervisors in identifying and resolving problems.
- Fire/Burglar alarm troubleshooting.
- Planned new and modified installations to minimize waste of materials provide access for future maintenance and avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical codes.
0-5 years of experience
Viewed various electrical layouts that are given on the builder’s blueprint in order to check and ensure the compliance to fire and electric codes.
- Responsible for installation and repair or various types of fire alarm systems in homes, offices and other multimillion dollar compounds.
- Replaced defective fire alarm systems and parts in order to maintain compliance with fire code at various mission critical facilities.
- Maintained annual and semiannual fire compliance schedules at various amenities throughout the southern region of the United States with zero mishaps or life treating accidents.
0-5 years of experience
Able to read electrical, architectural and mechanical diagrams, drawings or specifications to determine job requirements, plan the layout of wiring systems test to locate and repair electrical malfunctions.
- Installation of electrical and electronic control systems and insulated cables and equipment; such as storage heaters, water heaters, electrical panels and fire alarm systems.
- Managed budget for all supplies, equipment, and materials.
- Able to study and comprehend new technology.
- Installation and troubleshoot of fire alarm systems.
- To explain instructions and guidelines to others and assign work to employees by prioritizing and coordinating work of the unit.
0-5 years of experience
Install, service, and program all models of EST, Silent Knight, Notifier, Firelite, and Honeywell fire alarm panels.
- Project management of installation of fire alarms
- Work closely with electrical contractor during large fire alarm installations.
- Read prints and work with engineer to make corrections where necessary.
- 24 hour emergency service, tech support, and customer service.
6-10 years of experience
Install, inspect and repair fire alarm systems in existing commercial and residential buildings
- Review building/construction plans daily
- Guarantee local and federal codes are followed
- Meet with contractors and subcontractors to ensure that a quality product is produced
- Eliminate any inconvenience to the homeowners and tenants
0-5 years of experience
- Worked on the analogue addressable fire alarm system installation of Gamewell-FCI for various projects using 7100 and E3 panels complying with NFPA 72.
- Made the SLC and NAC circuit termination.
- Drew fire alarm riser diagram in AutoCAD.
- Performed inspection, cleaning and testing of smoke detectors.
- Did take off of the projects for fire alarm, prepared the proposals.
0-5 years of experience
Installed conduits, wiring, and panels of life safety/fire alarm systems.
- Implemented energy-efficient solutions that were a financial saving for clients.
- Installed, maintained, repaired and tested equipment for life safety/fire alarm systems.
- Troubleshot shorts, faults and troubles within the electrical systems.
- Assisted technicians in the process of programming and testing of electrical systems.
- Ensured redlining and details of prints were completed in a timely manner.
- Assured completion and maintenance of systems were finalized when clients resumed control.
- Knowledgeable of Honeywell, Simplex and compatible fire alarm systems.
0-5 years of experience
Examined systems to locate problems, such as loose connections or broken insulation.
- Tested backup batteries, keypad programming, sirens, and all security
- Mounted and fastened control panels, door and window contacts, sensors, or video cameras and attached electrical and telephone wiring to connect
- Installed, maintained, or repaired security systems, alarm devices, or related equipment, following blueprints of electrical layouts and building
- Fed cables through access holes, roof spaces, and cavity walls to reach
- Inspected installation sites and studied work orders, building plans, and installation manuals to determine materials requirements and installation
- Tested and repaired circuits and sensors, following wiring and system
- Drilled holes for wiring in wall studs, joists, ceilings, or floors.
- Demonstrated systems for customers and explained details, such as the causes and consequences of false alarms.
0-5 years of experience
Responsible for performing servicing and testing of fire alarm equipment’s.
- Tested security systems and access controls.
- Completed service inspections and repairs within a strict time frame and a budget limit.
- Resolved problems in the security systems of the company.
6-10 years of experience
Performing Installation, inspection and serviced all notifier and fire lite alarm systems.
- Assembled and programmed new panels and equipment.
- Ensuring a high level of customer service, satisfaction and communication.
- Documenting technical reports related to specific design issues.
- Utilizing design tools to efficiently execute project deliverables.
- Carrying out electrical and fire alarm system design calculations on simple power and fire alarm systems.
- Assisting in the programming and installation and validation of operating systems according to customer specifications using manufacture’s code.
- Testing and resolved and troubleshot problems.
- Training less experienced technicians and customers as necessary.
- Utilizing pre-planned schedule to ensure all inspections were completed in a timely
6-10 years of experience
- Supervised many aspects of the installation for “Project Terminal D” at DFW Airport
- Supported the Senior Project Manager of the Fire Alarm division
- Assisted with Security and Access Control division
- Superintendent for multiple clean room projects at Texas Instrument facilities
- Carried out annual inspections at Texas Instruments; Raytheon; and DRS clean room facilities
- Performed final inspections with AHJ
0-5 years of experience
Examine systems to locate problems, such as loose connections or broken insulation.
- Test backup batteries, keypad programming, sirens, and all security features in order to ensure proper functioning, and to diagnose malfunctions.
- Feed cables through access holes, roof spaces, and cavity walls to reach fixture outlets; then position and terminate cables, wires and strapping.
- Demonstrate systems for customers and explain details, such as the causes and consequences of false alarms.
0-5 years of experience
Provide excellent customer service and assist the technician in checking systems to locate problems such as loose connections or broken insulation
- Test backup batteries sirens, and all security features in order to ensure proper functioning
- Install, maintain, and repair security systems, alarm devices, and related equipment, following blueprints of electrical layouts and building plans
- Assist with installation of systems and mount and fasten control panels
- Test and repair circuits and sensors, following wiring and system specifications
0-5 years of experience
Installing commercial fire alarm systems
- Running conduit, pulling wire and installing devices
- Installing intercom systems and preparing doors for the security system
- Upgrading existing fire alarm systems
- Acquired knowledge from the electricians regarding bending conduit to meet NEC codes from 1/2 to 1 inch EMT
0-5 years of experience
Examine systems to locate problems such as loose connections or broken insulation
- Feed cables through access holes, roof spaces, and cavity walls to reach fixture outlets; then position and terminate cables, wires and strapping
- Inspect installation sites and study work orders, building plans, and installation manuals in order to determine materials requirements and installation procedures
- Install, maintain or repair security systems, alarm devices, and related equipment following blueprints of electrical layouts and building plans
- Mount and fasten control panels, door and window contacts, sensors, and video cameras, and attach
- Mount raceways and conduits, and fasten wires to wood framing, using staplers
- Test and repair circuits and sensors
- Test backup batteries, keypad programming, sirens, and all security features in order to ensure proper
6-10 years of experience
Complete residential and commercial fire/security system installations.
- Material procurement and inventory management of fleet vehicle supplies.
- Responsible fleet vehicle maintenance
- Trained new technicians as they joined the team.
- Provided customer/end user training after installation
- Completed service calls and installation upgrades.
0-5 years of experience
- Performed service and inspection activities on electrical fire alarm systems, access control and security systems
- Displayed a minimum of 7 years of experience in all phases of fire systems work, including rough wiring, wiring of devices and panels, and layout and installation of alarm devices and other systems components
- Knowledgeable of Simplex, Firelite, Edwards, Notifier, Addressable and Hardwired systems, Class A and B.
- Read and interpreted blueprints, diagrams, submittals, specifications and schematics
- Supervised and inspected the installation of equipment to meet customer specifications
- Performed all tasks required to completely install access controls, CCTV, fire alarm and alarm monitoring security systems
- Called upon to inspect, test, troubleshoot and repair selected system deficiencies and program dialers to the monitoring station
- Maintained accurate preventive maintenance records and keeps work area clean
- Installed electrical conduit from sizes half inch to four inches
- Installed traffic light, cameras and radar for toll booth for the state of Maryland
0-5 years of experience
Projects worked on: Fort Belvoir Army Hospital and Johns Hopkins Medical Center
- Trained new technicians
- Installed Siemens and Notifier systems
- Managed crews in multiple buildings
- Troubleshot, pretested, tested and commissioned systems with the Fire Marshall and the Army Corps of Engineers
0-5 years of experience
Handled running of installing cables lines.
- Terminated Cat 5, Cat 6, rg6, rg5 and phone lines.
- Followed all blue prints to specifications.
- Serviced phone jacks, smoke alarms, camera, and surveillance equipment.
- Installed security Devices with special attention to detail.
6-10 years of experience
Subcontractor of Tyco Integrated Systems (ADT) providing installation, maintenance and service.
- Technician of Fire Alarm Systems (Commercial and Industrial).
- Card Reader Installation (Access Control).
- Management of three employees providing training and supervision.
- Installation, service and trouble-shoot and repair of electronic and electrical controls.
0-5 years of experience
Verifies fire alarm system functioning by testing equipment, connections, and signals; identifying and correcting problems.
- Assemble, install and test new panels and equipment.
- Respond to trouble calls, malfunctions and emergency situations.
- Complete and process all necessary paperwork for testing/inspections.
- Assured all serial numbers of fire alarm devices were contingent with its proper locations.
- Educate and train customer on system operation and functionality.
- Ensure a high level of customer service, satisfaction and communication.
- Maintains safe and secure work environment by following safe practices and guidelines.
0-5 years of experience
Service, Install and Repair electrical components of fire alarm systems and video surveillance equipment.
- Provide system upgrades, via software and hardware.
- Use of small tools, electronics equipment, resistors, capacitors, wire, multi-meter, coax cable and schematics were an essential part of this job.
- Excellent customer service, full interaction was always presented.
- Understand the importance of paperwork and filling out Daily Activity Reports as well as Requests for Parts/Materials.
0-5 years of experience
Assisted Senior technicians in the Installation of Fire Alarm Systems
- Assisted Senior technicians in the trouble-shooting of technical issues on Fire Alarm Panels (EST 2, EST 3, ETC.)
- Assisted FDNY with the inspection of Fire Alarm Systems/Interacted with customers on job site
- Ensure that all maintenance reports are turned in on a weekly basis
- Responsible for the preventive maintenance of Fire Alarm Systems
6-10 years of experience
Install and terminate Low voltage cabling and devices to meet the client’s needs.
- Broad experience in terminating Cat5, Cat6, high speed internet, phone service, basic and intermediate electrical wiring and connections.
- Trained in designing telecommunications system, identifying layouts paths, patching panels, mounting racks, and supporting cabling structures, installing conduit.
- Intermediate understanding of network connectivity via copper, fiber optic, color codes, termination and testing.
- Installation knowledge includes but is not limited to [company name] boards (Lenel), Door position switches, Card readers, IP security cameras, Smoke detectors, Strobe lights, speakers, Aiphone systems, intercom systems, Mag locks, electric strikes, Electrified crash bars, power supply box.
6-10 years of experience
Installation and maintenance of electrical equipment and electrical control systems.
- Maintenance, installation and inspection of electrical and fire alarm systems.
- Manage installation and inspection of sprinklers, fire pumps and fire alarm system.
- Input, maintain and update all the information relating to the life safety.
- Manage appointment scheduling for electric and fire alarm contractors.
- Manage accounts and coordinate service to ensure customer satisfaction.
- Working on fire and security systems, maintenance and record keeping.
- Diagnosing and resolving electrical and fire alarm systems faults.
6-10 years of experience
- Managed, installed, and inspected, fire alarm systems, security alarms, and detection devices.
- Assembled and programmed new panels and equipment
- Performed testing, inspections and maintenance of fire and security alarm systems
- Highly-proficient in reading and interpreting building-schematics and blueprints
- Access Control/CCTV Installation and diagnostics specialist
- Equipment inventory specialist
- Attended technical meetings with engineering functional staff
- Conducted customer software and hardware training seminars
- Customer-relations expert
0-5 years of experience
- Create and execute project work plans and revise as appropriate to meet changing needs and requirements
- Service, troubleshoot and install many different manufacturers Fire/Life Safety Systems including Simplex
- Analyze blue prints, schematics and drawings for the purpose of installing new or upgraded equipment
- Ensure systems installations are in accordance with contract documents and recommended manufacturers installations requirements
- Read and interpret blueprints, diagrams, submittals, specifications and schematics
0-5 years of experience
Field Service Specialist with Building Automation Systems and Allen Bradley programming and maintenance experience.
- Responds to service requests, trouble-shoots, diagnose system malfunctions
- Performs preventative maintenance on electric/electronic DDC control systems, HVAC, fire alarm and security systems in commercial/industrial facilities.
- Experience with systems that involve advanced solutions such as Enterprise Buildings Integrator (EBI), Echelon products, Lonmark and other open technologies for building automation.
- Experience with programming and maintaining Barbara Coleman controllers.
0-5 years of experience
- Certified on Notifier NFS-640 and 3030
- Foreman of work crew
- Plan and map out job installations
- Complete installation – Pull wire, trim out devices, terminate field charger supplies, and terminate Notifier, Silent Knight, and Fike panels, with complete as-built drawings
0-5 years of experience
Reviews and implements technical instructions, plans, work standards, and controls to ensure compliance with state and national regulations
- Experience with Gamewell, FCI, Fike, Fenwall, Notifier fire alarm control panels.
- Install, service, troubleshoot, and monitor fire alarm and detection systems, clean agent fire suppression systems, and other special hazard suppression systems
- Preforms work in a variety of facilities including, but not limited to, military installations, food processing and storage facilities, industrial complexes, hospitals, residential complexes, educational institutes
6-10 years of experience
Perform preventive maintenance on fire protection and alarm systems; troubleshoot, wiring, panels, sensors; record data on PDA/pocket PC.
- Advise building engineers on fire panel procedures.
- Replace parts in fire alarm system and command state module.
- Pull wire for panel connections.
- Coordinate live tests in buildings through the five boroughs.
- Represent company during fire inspections and assist clients in correcting any problems/violations during inspections.
- Filled out reports for maintenance jobs and service.
- Utilized tools such as multi-meters, power tools, various types of screwdrivers, toners, connectors, etc.
- Utilized Riser diagrams/interpreted schematics
0-5 years of experience
Running a Wal-Mart project
- Remodeling building with new fire alarm & security
- New fire alarm panel Bosh combo
- Replace all existing devices fire & security
- Running a Sam’s Club Re-modeling new panel new system combo panel Bosh
- Running all conduit pipe risers ways all penetrations for doors contacts
6-10 years of experience
- Install Simplex fire alarm systems
- Review project drawings and obtain all facts necessary to perform programming activities according to specifications and sequence of Operations
- Complete and submit test reports as well as certificates of completion and other documents as required
- Read and interpret complex construction blueprints, diagrams, and specifications used in installation activities
0-5 years of experience
- Responsibilities include fire alarm installation throughout businesses, organizations and small companies.
- Design of proper medium and access points required for installation.
- Demonstrate active systems for clients, and explains details such as the causes and consequences of fire alarms.
- Install, maintain, or repair security systems, alarm devices and related equipment, following blueprints of electrical layouts and designs.
Fire Alarm Technician Duties and Responsibilities
In order to ensure the fire safety and security of buildings, a Fire Alarm Technician performs many different tasks. We analyzed job listings for Fire Alarm Technicians in order to identify these core duties and responsibilities.
Perform Tests and Inspections The Fire Alarm Technician tests all newly installed fire alarms and sometimes perform regular inspections to ensure that systems and equipment continue to work according to their specifications. They must test all basic alarm panel functions to make sure that every offered feature is functional. This part of their job requires proficiency in the use of test equipment such as multi-meters and digital analyzers.
Install Fire Alarms Responsible for full installation of fire alarms and other assigned security devices, the Fire Alarm Technician must travel to customer locations, thoroughly install devices and program all fire alarm panels. This requires them to read and understand product manuals and use necessary tools. After products are installed, the Fire Alarm Technician will instruct the customer on proper device use and maintenance measures.
Repair Fire Alarms In addition to installing fire alarms, the Fire Alarm Technician responds to maintenance calls, troubleshooting devices and using device manuals to repair non-functioning fire alarms and restore them to original functionality or replace them if necessary. They educate customers on preventative care and regular maintenance to prevent system malfunctions. They may also perform system and device upgrades on occasion.
Adhere to Regulations Knowledgeable about all fire safety codes and regulations, Fire Alarm Technicians ensure that the devices they install meet all local and federal laws and building codes. They must also comply with OSHA safety policies and may be required to obtain certain licenses and certifications depending on the state in which they are employed.
Prepare Reports The Fire Alarm Technician prepares service reports at each service location, completing all necessary paperwork with client, recording all work performed, materials used and any problems encountered. They write and deliver status reports on contract jobs and update work orders as well.
Fire Alarm Technician Skills
Timely and dependable employees, Fire Alarm Technicians juggle multiple jobs, responding to work orders quickly and efficiently. They provide excellent customer service, possessing solid communication and interpersonal skills. In order to effectively troubleshoot, successful Fire Alarm Technicians must also be detail-oriented problem solvers. Flexibility is necessary in this industry as schedules can be unpredictable and often require evening or weekend work. Core skills: Based on job listings we looked at, employers want Fire Alarm Technicians with these core skills. If you want to work as a Fire Alarm Technician, focus on the following.
- Possessing NICET fire protection certification
- Having fire protection experience
- Showing maintenance or testing background of some sort
- Demonstrating basic computer skills
Advanced skills: While most employers did not require the following skills, multiple job listings included them as preferred. Add these to your Fire Alarm Technician toolbox and broaden your career options.
- Additional certifications related to fire safety
- Knowledge of manufacturer’s equipment
- Fire alarm installation and repair experience
- Associate’s or technical degree in related field
Fire Alarm Technician Resources
We searched the Web to find the best industry resources to help you continue exploring a career as a Fire Alarm Technician. From thought leaders to industry groups, this list is packed with opportunities to learn, connect and engage. On the Web
Fireline Blog – Fire protection product company blog
Total Fire and Safety – A blog about fire safety practices and procedures
Fire and Life Safety America – A blog focusing on fire safety and preventative care Industry Groups
National Fire Protection Association – Leading resource on fire protection
Society of Fire Protection Engineers – Professional organization for fire protection engineers
Fire Department Safety Officers Association – Organization for fire safety officers Fire Alarm Technician Books
Essentials of Fire Fighting and Fire Department Operations – Guide to fire fighting
On the Burning Edge – True story of a firefighter that weaves in fire management history
Fire and Emergency Services – Fire safety procedures and techniques