- Featured in:
-
More Assembly Worker Resumes
Use these Assembly Worker samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Machine Operation Resume Samples
Assembly Worker Resume Samples
No results found
0-5 years of experience
Provide assembly line with total job rotation responsibility for the product build of seat coverings, head rests, arm rests and super cab backs consistent to safety and quality standards for the successful build of the F150 Series.
- Administered the elements of the 5S program consisting of Sorting, Set In Order, Shining, Standardization and Sustainment of finished product
- Implemented safety and housekeeping standards associated to the cleanliness of the work area.
- Removed cardboard, trash and other recyclable material to appropriate compactors for environmental waste disposition.
0-5 years of experience
Produced components by assembling parts and subassemblies.
- Maintained speed of assembly and followed all safety procedures.
- Identified any assembly line maintenance issues and reported as needed.
- Operated and monitored assembly machines and maintained productivity.
0-5 years of experience
Managed and trained new employees
- Completed production targets within deadlines
- Provided suggestions to the team supervisor to raise the output of the team as a whole
- Analyzed and measured components
- Packaged materials and items according to specified standards
- Monitored departmental inventory
- Assisted in product quality assurance
6-10 years of experience
Assemble C-130 components and performing all assembly and reforming of aircraft components according to the appropriate authorization document.
- Work with various groups including assembly supervisor, quality inspector, engineering, MRB, tooling, production control, and support staff to improve quality, safety, and reduce costs.
- Use aircraft knowledge and problem solving skills to work with engineering to assist in determining the appropriate actions to fix non-conformances.
- Consistently implement various improvements in safety, FOD practices, 6’s, lean, and Six Sigma, in many different cost areas.
- Monitor metrics, problems, trends, etc., in order to determine solutions, required process changes, etc. that will make the function more efficient.
- Keep abreast of industry trends through benchmarking, participation in professional associations including communications council, FOD directorate, and quality council in order to lead strategic business direction of Department.
0-5 years of experience
Produced automotive parts using air powered hand tools
- Maintained a clean and organized work area
- Followed strict safety and Personal Protective Equipment (PPE) procedures
- Reported problems with equipment and materials to Assembly Supervisor
- Adhered to quality control measures in accordance with company policies
- Worked as a team
0-5 years of experience
Assembled hand-tools such as Super-saws as well as special ordered “ala cart, ” tools
- Repaired and reworked hand-tools for shipment to customers
- Consistently met production deadlines and quality standards to ensure and meet customer specific needs
- Routinely kept safe and clean work stations, tools, parts, and equipment to avoid unnecessary loss of production time and profit
- Followed safety procedures and guidelines during the assembly process
0-5 years of experience
Worked with teammates to accomplish daily quota
- Built superchargers for General Motors, and Chrysler
- Maintained and organized inventory of sub assembly parts
- Assembled hood scoops and base plates for Mopar
0-5 years of experience
Manual Packaging and distribution of DVD’S for Fox and Lions ate Productions
- Assembly line
- Factory Work
- Assisted the physician with emergency room visits and follow-up care.
- Planned field trips to encourage social skills
- Monitored behavioral changes and made necessary documentation in clients file
- Worked directly with special needs and autistic children in military families.
0-5 years of experience
Ensured and maintained the flow of production at all times.
- Loaded and unloaded items from machine conveyors and conveyances.
- Maintained communication with technician, supervisor, and operator to ensure product quality.
- Volunteered to help another line when short of staff.
0-5 years of experience
I currently work as a small parts assembler for a major production company in Newport News, Virginia.
- I adhere to all safety and quality standards as set forth by the company.
- I am responsible for accurately and efficiently producing a large quantity of parts nightly.
- Often times I exceed the goals that have been set forth by management.
- Responsible for maintaining a clean and safe work station.
- I have trained on multiple operations.
- I perform minor equipment maintenance.
- I use pallet jacks, Allen wrenches, screwdrivers, and box cutters to assist in my process.
0-5 years of experience
Operated handheld power and hand tools, including screw gun to assemble cabinetry according to client specifications
- Attached/secured and non-wood items as specified in blueprints to each stand including electrical boards, kick plates and other metal protective pieces
- Assisted cabinet makers as needed with more intricate tasks (example: laminate application)
- Complete filing and sanding of cabinetry.
- Clean and maintain workstation throughout and at end of day.
0-5 years of experience
Responsible for preparing over 3000 electronics for shipment a day
- Worked alongside other employees in a dynamic environment
- Successfully passed Secret Shopper evaluation with 100% customer service rating three months consecutively.
- Completed work based on company standards
6-10 years of experience
Working to exact manufacturing instructions, master layouts and drawings.
- Assembling electrical wiring to PC boards using crimping and braiding techniques.
- Electrical soldering of PC assembly boards to military standards.
- Conductivity testing and final inspection for defects of finished product.
- Ensuring compliance and process traceability to quality standard (ISO 9001).
- Recertified to IPC ‘J’ Military STD-001 (Soldering).
- Working to strict timescales in order to meet production requirements.
0-5 years of experience
Maintained accurate stock records and schedules.
- Selected products for specific routes according to pick sheets.
- Unloaded, picked, staged and loaded products for shipping.
- Worked at a rapid pace to meet tight deadlines.
- Operated powered lift trucks, floor sweepers, pallet jacks and forklifts safely, with a 0% incident rate.
- Packed containers and re-packed damaged containers.
0-5 years of experience
Loaded weld fixtures in a timely manner using proper order of procedures.
- Made sure to complete all tasks and keep up with production numbers.
- Kept work area clean, free of weld dust and debris. Always complied with wearing all proper PPE at all times.
- Inspected parts for defects, as a last line of defense before shipping goods to the customer.
- Troubleshot problems with robots in the line, made sure maintenance was aware of any issues.
0-5 years of experience
Measure, weigh, and count products and materials.
- Examine and inspect containers, materials, and products in order to ensure that packing specifications are met.
- Remove completed or defective products or materials, placing them on moving equipment such as conveyors or in specified areas such as loading docks.
- Seal containers or materials, using glues, fasteners, nails, and hand tools.
- Record product, packaging, and order information on specified forms and records.
- Maintain a safe work environment by following standards and proper food handling precautions
- Able to lift/move boxes that weigh up to 35 pounds.
- Frequent standing for long periods of time
0-5 years of experience
Received raw materials and components
- Assembled different components per specifications
- Followed instructions efficiently and operated semi-complex equipment
- Performed paperwork and data entry tasks
- Recommended improvements to the processes
6-10 years of experience
- Line leader in assembly and manufacturing of cables.
- Repaired faulty cables that were returned after testing.
- Assist in managing the stockroom.
- Inspection of cables that were shipped to the facility and final inspection of cables prior to shipping.
- Reported to all supervisors with proper paperwork regarding the production of cables.
0-5 years of experience
Work with team members to maximize productivity, efficiency, and strive for continuous quality improvements.
- Prepare (solder and wire) and assemble fixtures and associated subassemblies.
- Pick and process incoming and outgoing product orders and materials.
- Assured that all products where built to the highest quality standards.
0-5 years of experience
Paper inventory is maintained and pulled as required to complete customer processing requests as inserts, brochures, envelopes, carriers etc
- Set-up personnel pull fulfillment per customer requirements stated on pick tickets
- Fulfillment is placed in individual bins on rolling racks and forwarded to warehouse staging area until production requests for processing
- Maintains familiarity with all state and federal regulations, SOPs, OSHA, etc.
0-5 years of experience
Made sure that product were produced on time and are of good quality.
- Ensure that all health and safety guide lines were followed.
- Inspected finished products for quality and adherence to customer specifications.
- Actively suggested operational improvements to enhance quality, improve production times and reduce costs.
0-5 years of experience
Assembly of 4-16 Ton fork truck on an assembly line
- Report low inventory to material handlers
- Working independently and in small groups
- Varying degrees of difficulty in complexity of the assembly between the different sizes of fork trucks
- Adhere to SOP, 5S, and Kaizen program
0-5 years of experience
Assemble medical devices on the assembling line, both the Infusor and the Intermate
- Inspect, remove, and rework some of the medical devices
- Testing the device to see if the product is in working condition
- Cleaning up and organizing the workspace for better efficiency
- General Labor
6-10 years of experience
Perform quality checks on products and parts.
- Package finished products and prepare them for shipment.
- Rotate through all the tasks required in a particular production process.
- Shovel, sweep, or otherwise clean work areas.
- Maintain production equipment and machinery.
- Provide assistance in the production of wiring assemblies.
0-5 years of experience
- Learn and preform new assembly jobs as needed
- Use proper equipment, tools, fixtures, and parts while on the assembly line.
- Report any problems found with products quality to Team Leaders
- Assist Team Leaders with any repairs that need to be made
0-5 years of experience
Assemble, mark and tag products
- Check quality of various products before packing
- Operating production line equipment
- Report equipment faults to maintenance staff and supervisor
- Packing products ready for shipment in crates or other containers
- Maintain a clean and safe environment for all other staff
0-5 years of experience
Cleaned and Inspected compression sleeves and tourniquet cuffs that was used for surgery
- Tested medical devices for functionality by using different tools and machinery
- Entered the device data into a computerized system
- Experienced in training new employees as well
0-5 years of experience
A varied and multi-skilled job role working for an innovative charity
- Recycled and up-cycled items ranging from large furniture items to oil lamps
- Obtaining value from items including wallpaper sample books (to be used in primary schools)
- Using a range of hand tools and equipment – drills, screw drivers etc.
- Completed training for Health and Safety in the Work Place
0-5 years of experience
Operate machinery used in the production process, or assist machine operators.
- Examine products to verify conformance to quality standards.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Mark or tag identification numbers on parts.
0-5 years of experience
Installing front and Rear Bumper for Vehicles
- Operating tools such as Drills and Hammers for installation of car nuts and bolts.
- Installing inner carpet and handles for rear trunks
- Recycling plastic and cardboard materials by Sorting and stacking for forklift pick up.
0-5 years of experience
Feed machines and conveyor belts with products.
- Monitor line production for stoppages, jams and quality issues.
- Package bagged item at the end of the production line.
- Palletize and shrink wrap end product for storage or shipment.
- Follow all safety rules and regulation
0-5 years of experience
Responsible for packing soap products
- Ability to inspect all materials at each station
- Ability to set imperfect products aside, while packaging and counting products
- Ability to visually inspect products for imperfections
0-5 years of experience
Operated grinder tools and forklifting (Sit-down)
- Followed work orders and maintained good work quality
- Repaired hydraulic thermaflow units
- Soldering wiring materials
- Using measurements to make wires for units
0-5 years of experience
Package finished products and prepare them for shipment.
- Rotate through all the tasks required in a particular production process.
- Operate machinery and heavy equipment, such as forklifts.
- Load materials and products into package processing equipment.
- Clean containers, materials, supplies, or work areas, using cleaning solutions and hand tools.
- Record product, packaging, and order information on specified forms and records.
- Examine and inspect containers, materials, and products to ensure that packing specifications are met.
- Mark and label containers, container tags, or products, using marking tools.
- Remove completed or defective products or materials, placing them on moving equipment such as conveyors or in specified areas such as loading docks.
- Assemble, line, and pad cartons, crates, and containers, using hand tools.
- Seal containers or materials, using glues, fasteners, nails, and hand tools.
0-5 years of experience
Able to assemble product within allotted time frame.
- Fills individual serving cartons with portions of various foods and condiments
- Manually fills cups with fruit and or/ vegetables and then seals them by using an automatic sealing machine
- Fills bags with fruit and or/ vegetables and manually sealing with tapping machine.
- Maintains consistency in food quality standards.
- Able to complete production and maintain quality, while meeting the time efficiencies that have been set.
- Complies with all State Health and Safety codes and maintains a high standard of cleanliness in the kitchen area.
- Completes and follow prep list in a timely manner.
- Performs other duties, as assigned and following through on requests in a timely manner
0-5 years of experience
Sorted small plastic parts, discarding the damaged from the good
- Loaded parts into machine presses to be processed and formed
- Worked at a fast pace to keep up with the machine presses
- Packaged functional parts into boxes for shipment
10+ years of experience
Loading and unloading conveyors and carts
- Brazing and soldering
- Hanging and unhanging parts
- Using power, pneumatic and hand tools
- Operating machines and presses
Machine Operation Cover Letter Examples
Rate This Article
Assembly Worker
Last edited by: Gabriela Barcenas, CONTENT STRATEGIST -
Gabriela Barcenas
CONTENT STRATEGISTGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
