- Featured in:
-
More Furnace Operator Resumes
Use these Furnace Operator samples as a guideline or visit our extensive library of customizable good resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Machine Operation Resume Samples
Furnace Operator Resume Samples
No results found
0-5 years of experience
Set furnace controls to regulate flow of air, gas, oil and current to heat metal to specified temperature.
- Controlled furnace to refine and melt Beryllium Products and metal to specifications.
- Estimated temperature and measured temperature using pyrometer.
- Melted Beryllium from solid to powder form, emptied molten metal from furnace, transferred molten Beryllium from tundish to dross.
6-10 years of experience
- Responsible for maintaining and operating three 7.5 ton inductotherm induction furnaces while making sure the right scrap iron was ready to be charged into the furnaces.
- After charging the furnaces I would cook the scrap metals and any carbon needed depending on the charge for the type of iron being poured that day.
- Cooked iron at 2600-2650 degrees Fahrenheit, tested datacast carbon and silican, brought temperatures to the desired temp for the iron pourers to pour into molds.
- Once the desired temperature was achieved, slag off any impurities and have the transporter add any inoculants needed to fill the 1200 pound transport.
10+ years of experience
Place bales of aluminum into regent furnace to be melted into liquid form
- Take samples of aluminum to ensure metal meets buyers specifications
- Backup Shift Lead Man, supervising seven employees and taking responsibility for aluminum specifications and maintaining a safe working environment
- Certified forklift operator and certified OSHA forklift instructor
- Roll aluminum pellets into sheet form
- Oversee up to six employees
- The use and standardization of a Quantonometer
- Proficient with the use of multiple computer programs
0-5 years of experience
- Responsible for the loading, programming, and unloading of heat treatment furnaces for a variety of different applications: Tempuring, quenching, hardening, annealing, solutions, long and short aging, and most importantly, high-temperature brazing.
- Reliably operated forklift for heat treatment operations, and also greatly assisted with shipping/receiving, and inventory.
- Assisted shipping/receiving department regularly: tracking, stocking, and moving/organizing orders around the warehouse
- Acted as data entry clerk for all incoming/outgoing Heat Treat data
- Responsible for general janitorial duties; keeping the warehouse and all workspaces in clean, working order.
0-5 years of experience
Load and Unload Furnace. Create data charts and confirm in SPC
- Run Makino (CNC Grinding Machine)
- Run Vibratory Blending Machine
- Prep Parts for a braze run
- Use proper lifting techniques for safety and quality reasons
- Use sand blaster to clean plugs and plates as needed
- Document all time and defects on travelers
0-5 years of experience
- I have internship Training in EMCO Industries limited as a Quality Inspection.
- I also know all ceramic tests like Electric Muffle Kiln, Dilatometer, Annealing Chamber, Polarizing Microscope, and Abrasion Tester for Glazes, Screen Printing Machine, Porosity Tester, Thermal Shock Tester etc.
- Today worked in “Sufi group of industries” at water Softening Plant as an asst. plant operator.
- I can operate & maintenance Labeling, Shrinking, Blow Molding, etc Machines.
0-5 years of experience
- Operate deep drawn transfer power presses.
- Use press to trim, draw, pierce and notch metal plates or sheets.
- Use a micrometer and caliper to read, measure, and inspect parts to print.
- Read blueprints to ensure that parts are made per specs.
- Operate hand jack and forklift to transfer parts/pallets from one location to another in the facility.
- Operate tumblers in order to debur parts before being packaged for customers.
- Started as a temporary employee and then hired on permanent after 11 months. (QPS Employment)
0-5 years of experience
- Started as an assistant and worked up to trainer and lead operator
- Made high quality stainless steels used in the aerospace industry
- Troubleshoot and maintenance of furnace
- Supervised eight employees
0-5 years of experience
- Document weights and measures of daily material processing
- Create identification documents for all materials processed
- Monitor equipment operation to verify proper operation and/ or identify any malfunctions
- Test samples of processed materials to verify conformation to specification
- Operate front end loader and forklift to load or relocate materials within workspace
- Oshawa certified front end loaders and fork lift certified
0-5 years of experience
- Loading untreated products into a furnace or tank
- Setting the temperature controls for particular treatments
- Monitoring the treatment cycle in line with instructions
- Cooling products by air drying, or using water, oil or chemical baths (known as quenching)
- Cleaning oxides and scale from products using steam sprays or with chemical cleaning solutions
- Testing sample for hardness and other properties to make sure they meet the manufacturer’s
- Specifications Recording test results on a computer system.
0-5 years of experience
- Programed, processed, and operated vacuum and continuous furnaces for heat treating various products for the medical and aerospace industries.
- Operated tumbler machines to de-burr parts.
- Metallurgical processing various types of metals including but not limited to brazing, annealing, and hardening of products.
- Used various calipers, measuring, and hardness testing machines to confirmed accurate processing.
- Also operated fork-lift for shipping and receiving duties, as well as calling
0-5 years of experience
- Loaded and unloaded aviation parts
- Maintained lot locations
- 4 ton overhead crane experience
- Walk behind lift truck experience
- Fork truck experience
0-5 years of experience
- Maintain furnace to process parts correctly
- Prepare parts so they can be put into furnace
- Packaging parts for return to customer
- Operate various machines
- Heat treat various material
0-5 years of experience
- Operate different types of hilos
- Operate a crane to load and unload spiders
- Write down the location of the material after it was unloaded
- Check the steel to make sure the right kinds were being loaded and unloaded
0-5 years of experience
- Pull and load core parts from stock into blocks, and load into furnace
- Unload core parts from furnace, and record scrap into the computer
- Visual inspect parts for cracks or any other defects
0-5 years of experience
- Operated Reverb and Electric Furnaces
- Responsible for alloying furnace
- Charged and tapped furnace
- Pump operations Chlorine/Nitrogen
- Tapped Ingot and Sows
6-10 years of experience
Take charge qualities and operating continuous heat treat furnace lines
- Austempering
- Neutral harden quench and temper
- Inspection of parts and preparation, use of testing equipment
6-10 years of experience
- Die maintenance/repair
- Die Polishing
- Shipping/receiving (packaging & processing work orders)
- Certified forklift instructor
- Maintenance on all machinery/equipment/vehicles
- Heat treating various alloys/coatings/materials
- Quality control (hardness tester/precise measurement/microscope)
- Niton X ray Analyzer
- Ability to operate 5 furnaces ranging 1940
- Heat Treat/TD Treatment/Stress relief/Temper
6-10 years of experience
Furnace operator
- Shipping and Receiving
- Fork lift operator
- Take hourly readings
- Train new employees
- Paperwork
- Load and unload furnaces
- Make furnace schedule
0-5 years of experience
- Brazing Furnaces
- Coating Furnaces
- Post Coating Furnaces
- Temperature Uniformity Surveys
- Nobel/Pit/Vacuum Furnace TPM
- Forklift Operator
6-10 years of experience
- Acid Line Pickler
- Tow Motor Operator
- Bander
- Wire Drawing
0-5 years of experience
- Hi-lo driver
- Package items
- Steel Work
0-5 years of experience
- Shipping and Receiving logs
- Delivery driver
- Glass handling experience
- Loading/unloading of trucks
- Lead furnace operator
- Forklift experience
- Glass cutting experience
- Order picking
- Customer service
Machine Operation Cover Letter Examples
Rate This Article
[Furnace Operator]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
