- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Machine Operation Resume Samples
Packaging Machine Operator Resume Samples
No results found
6-10 years of experience
Set-up and ran packaging equipment, consistently ensuring optimum speed and accuracy of equipment
- Performed final Inspection of products after packaging and labeling to ensure product compliance with FDA guidelines.
- Volunteered as member of new equipment committee which determined machine requirements and selected most effective and efficient new equipment as replacement that produced higher volume with less oversight.
- Entered data into the Oracle ERP system to record lot information, lot traceability, and manufacturing data
10+ years of experience
Required to meet daily schedules for production. Producing quality bags refers to proper seals, price-date, correct graphic, and registration of bags.
- Minimized film waste, monitored weight control on ATA, ensured that bags have correct weight.
- Maintained equipment, daily upkeep of Packaging Machine. Notified maintenance or resource when packaging machine is down.
- Ensured Product Quality, monitoring each machine for foreign matter detector.
- Directed and assisted team meetings.
- Traveled to other plants to help improve quality.
- General Clerical Duties as needed.
6-10 years of experience
Operating statistical weighers and bag makers. Utilizing quality systems to ensure proper bag weights, airfill and package seals. Manage packers, quality control, and good housekeeping. Inspect products to ensure quality. Inspet proper shelf life of products and maintain schedule.
- Helped achieve number film waste for company. Injury free since start of employment (7 years).
- Helped CI achieve Level 3 as a KPM owner.
- Was chosen to be point PMO on 2nd shift in the most challenging department at DBS. (Baked Doritos)
0-5 years of experience
Operated all packaging equipment throughout the packaging process
- Maintained and enforced a safe and clean working environment at all times
- Established and adjusted work procedures to meet production schedules
- Coordinated and developed new procedures in collaboration with engineering staff
- Diligently maintained safety and quality standards
- Removed production constraints and improve product quality
- Troubleshoot problems with equipment, devices or products
6-10 years of experience
Operate filling, capping labeling, cartooning, and blistered equipment on solid dosage, ointments and creams, liquid and aseptic packaging lines.
- Performed machine and electronic sensor challenges, metal detector challenges, check weighier challenges, removal torque testing and fill weight verifications.
- Troubleshoot machine jams, machine alarms and excursions/unexpected results, repaired as needed, and documented results
- Selected to train new hires to operate packaging equipment
- Performed colleague safety assessments in support of Pfizer’s behavior based safety culture program as a member of Safety Committee
- Selected to serve on task force reviewing standard operating procedures. Submitted recommendations and assisted with implementation of ideas for process improvement
- Cross-trained in Quality Operations responsibilities including, incoming inspections and packaging in-process inspections
- Trained in Aseptic Operations to run all equipment including, Kronos Labeler, Cartoner, Bundle Wrapper, and Case Sealer
0-5 years of experience
Worked on various packing equipment in regards to packing medication in a completely sterile environment.
- Completed training in overall line housekeeping, and daily record keeping & inventory management.
- Work on both CR-4 and CR-5 Production lines maintaining high production standard under extremely sterile conditions.
- Maintained in F-8 and F-9 Packaging line and inspection the final product for any deficiencies as to maintain the highest standard.
10+ years of experience
Provided relief as necessary to operate packaging machinery and inspected product to ensure only quality product was processed.
- Learned to operate the SIG and Robot machines
- Performed all quality control checks and entered data into computer database
- Measured height, length and width of product to ensure compliance with standards.
- Rectified problems by communicating issues with appropriate people
- Ensured cookies quality and specification were met in terms of color, shape and texture
0-5 years of experience
Setup, operated production line, to include, Bottle Unscrambler, Filler, Desiccant feed, Retorquer, Check Weigher, Topserter, Vision systems, Capper, and Labeler.
- Monitored progress and tracked it.
- Motivated team members to meet production goals.
- Enforced safety rules at all times.
- Checked all incoming components against batch record.
- Verify line clearance, completed required line clearance check list prior to start up.
- Reviewed batch records, reconciled all material at end of production.
- Completed the required sections of batch record in accordance to cGMP and SOP standards.
10+ years of experience
Trained new employees in proper operation of equipment to attain assigned out-put in a safe and consistent manner.
- Responsible for self scheduling of work for assigned equipment
- Set-up bagging machines and screw machines to assure consistent Quality Control processes attained.
- Trouble-shoot machines
- Maintained an excellent safety record
0-5 years of experience
Operated packaging machines to ensure quality and conformity of filled and packaged products to standards.
- Monitored the production line, watching for problems such as pile ups, jams, and glue that isn’t sticking properly.
- Inspected and removed defective products and packaging material.
- Removed finished packaged items from machine and separate rejected items.
0-5 years of experience
Operate and maintain industrial packaging equipment such as Ishida statistical weighers, Woodman Polaris and Ishida Apex/Atlas bag-makers, conveyor systems, and Douglas UACP, GUACP and Ishida UACP while maintaining a sanitary food production environment
- Coordinate with the Processing Department and Warehouse to maintain the process and minimize downtime
- Certified General Safety Point (GSP); trained to recognize and identify safety opportunities and eliminate potential hazards in the work area, as well as to give/receive feedback with a positive attitude
- Accustomed to a high-stress, time-sensitive manufacturing environment, guided by rigorous schedule attainment goals
- Assumed additional responsibility for tracking and presenting performance metrics for team, identifying trends in performance including safety
0-5 years of experience
Worked on high speed machine equipment and precision machinery used in mass production.
- Prepared machine for production process by equipping it with the required tools and parts.
- Troubleshoot problems with machine and fix if needed.
- Assured the constant availability of raw materials and inputs so that the machine could function at all times.
- Quality – Made sure the products manufactured from the machine were of high quality; made adjustments to improve the quality when possible.
- Worked over-time to complete the production requirement of the clients.
0-5 years of experience
Set up and operated packaging printing machine according to daily production requests
- Observed machine operations to detect malfunctions and made adjustments as necessary
- Inspected products to ensure that they are within specification and high quality
- Replenished packaging supplies, such as boxes, printer ribbon, and pallets
- Kept record of daily production and scrap sheet
- Wore all the necessary PPE and followed safety procedures
0-5 years of experience
- Ensured that production lines were properly staffed and running properly.
- Made schedule adjustments to maximize production efficiency.
- Recorded all data from the shift including downtime and machine efficiency for the shift for all production lines in assigned area.
- Trained new and temporary employees on task assigned for specific jobs.
0-5 years of experience
Cleaned and maintained equipment
- Performed quality checks and collected samples
- Entered information into AIM computer system
- Attended monthly quality assurance and safety meetings
- Participated as a safety committee member in addressing concerns/solutions
- Completed end-of-shift reports
0-5 years of experience
Read, fill out, and execute Batch Records (WIP (Work In Progress) documentation)
- Achieved successful GMP/cGMP and Respirator examination results
- Understand and comply with packaging and machine operators sets of SOP’s (Standard Operating Procedures)
- Set up and operated dispensing, turntable, tumbler, labeling, bottle capper, unifoil sealer and offshoot compactor disposal machines
- Thoroughly checked product for inconsistencies and bad packaging runs
- Maintained contaminant free environment (Clean Room)
- Investigated compromised product discrepancies
- Pulled, staged, and prepared product for packaging runs
0-5 years of experience
Tended machine that packs and seals packaged salad products.
- Operated and troubleshoots the Hayssen, Illapak, and Bosch production equipment.
- Examined packaged products on conveyor to detect defects, such as defective folds or seams in the bag, off centered stamps, and appropriate expiration dates.
- Observed flow of packaged bags and removes defective bags.
- Computed mathematical formulas and calculations required to complete operation paperwork.
- Ability to make mechanical adjustments to the machine to accommodate product changeovers.
- Managed 4 production lines and was responsible for ensuring that all products were ran in according with the production schedule for that day.
- Trained 5 people on the Hayssen, Illapak, and Bosch production equipment.
0-5 years of experience
Started packaging and filling machines by engaging proper controls
- Performed product packaging in accordance with product and company standards
- Sorted products for shipping from warehouse
- Conducted inventory count on finished and rejected items
- Monitored packaging and filling machines to ensure quality
- Keep a clean and safe work environment
0-5 years of experience
Operating various PKG machinery while maintaining efficiency and accuracy with weekly orders.
- First point of contact for anything referencing to the department during a shift.
- Traveling experience with Starfleet PKG
- Awarded Leadership Award in 2013 for ideas that made the PKG floor more efficient for a specific product ran in my Dept. of operations at the time.
0-5 years of experience
Set-up & operate multiple packaging machines, ensuring accurate code dates, weights, & that the correct product is put into correct bags.
- Ensure that each bag is properly coded, dated & sealed with a minimum amount of wasted product and supplies.
- Ensure that the product to be packed remains clean
- Keep assigned machines & area clean & safe, performing basic preventative maintenance on packaging machines, to include cleaning tape machines & rollers.
- Clean & sanitize lines during changeovers from one product to another
0-5 years of experience
Activates and observes machine operation to detect work piece defects or machine malfunction
- Inspects finish product to determine accuracy of machine operation
- Performs minor machine maintenance such as oiling machines and making adjustments
- Reduces downtime by assuring these tasks are performed promptly
- Assist coworkers to set up machine and transport finished product
0-5 years of experience
Ensures safe, frontline quality work in demanding high-speed packaging operations
- Organizes workload to gain efficiencies, exceed production goals, and fulfill orders accurately, on time, on budget, and on schedule
- Considered operational expert on many highly sophisticated industry leading packaging systems
- Verifies correct items, lot numbers, and product shipments meet customer expectations while also meeting standards of quality, safety, care, and regulatory compliance
- Team leadership skills validated as a trainer to others on industrial machinery and project completion
0-5 years of experience
Prepared machines to ensure that lines run smoothly
- Trained new machine operates
- Maintain machines by cleaning through proper procedures and keeping environmental clean when machine is running
- Prepared machines for first use and maintain same production throughout the entire batch
0-5 years of experience
Setup and operate the bottle indexing unit, capping machine, slat counter, cotton inserter, etc.
- Perform disassembly of tablet counter prior to major cleaning
- Perform major and minor cleaning
- Perform label reconciliation in- process and at end of batch
- Help operate the 60cu ft. blender(positioning and loading of raw materials into the blender)
- Help in compression and coating (weight checking and final packaging of finished product)
0-5 years of experience
In a GMP environment operate various types of packaging equipment such as fillers, cottoners, cappers, labelers, outserters, cartoners, bundlers, shrink wrappers, and banders, to ensure packaging of pharmaceutical products to meet production schedules and to meet customer requirements.
- Complete packaging line documentation to meet GMP requirements.
- Check and verify identity of all materials (materials, components, bulk product) against packaging orders.
- Follow all safety, OSHA, SOPs, GMP, departmental, and company rules and regulations to ensure compliance.
- Clean line area and line equipment to adhere to GMPs.
- Perform periodic line related checks and document results.
- Identify and communicate any potential quality issues to avoid rework and to ensure product quality.
- Collaborate with line mechanics on mechanical issues to improve line efficiencies and to reduce downtime.
10+ years of experience
Set up and operate multiple machines (accurate codes & dates)
- Keeping assigned machines clean and safe
- Perform preventive maintenance on packing machines
- Responsible for inspection of conveyors and scales prior to lines start-up and changeovers for one product to another
- High experience on high speed manufacturing environment
- Excellent communication skills and ability to communicate with co-workers
0-5 years of experience
Attach identification labels to finished packaged items, or cut stencils and stencil information on containers, such as lot numbers or shipping destinations.
- Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications.
- Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
- Operate forklift to load finished bins onto truck for hauling
- Operate forklift to unload inbound shipments and add into inventory
- Load tanker trucks with product to a specific weight
- Perform quality checks on outbound products to insure it meets customer specifications
6-10 years of experience
Operated packaging machine to package & seal products for shipping
- Inspected packaging for any errors or mistakes
- Maintained high level of efficiency & productivity
- Worked as a member of a multi-person team
- Followed safety procedures at all times
0-5 years of experience
Ensures that the product to be packed remains clean
- Cleans and changes knives/blades, pull-belts, tape machines, and rollers
- Perform basic preventative maintenance on packaging machines
- Clean and sanitize lines during changeovers from one product to another
- Inspects conveyors and scales prior to line start-up and changeovers
0-5 years of experience
- Order and receive vials and materials to package. Set-up and operate, troubleshoot packaging machine based on SOP. Experience with power equipment.
- Perform cGMP quality inspection of vials based on products being produced and packaged.
- Reconciliation of product at the end of packaging then perform line clearance at the end of each LOT.
- Documentation reviews for packaging production records.
- Other duties may be assigned by the Supervisor