- Featured in:
-
More Certified Welding Inspector Resumes
Use these Certified Welding Inspector samples as a guideline or visit our extensive library of customizable resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Maintenance Resume Samples
Certified Welding Inspector Resume Samples
No results found
0-5 years of experience
- Spearheaded and tackled, with my education and experience in fabrication, from start until the finish, every job and or task that came before me in a wide range of professional levels and difficulties with sustained success.
- Documented all processes and methods used for increased company improvements.
- Received my CWI education & experience from under the Company Senior Certified Welding Inspector. Qualifying Welders, Inspecting and Weld Testing Welds, Composing WPQ, PQR, and WPQR while adhering to The American Welding Society Standard of Codes.
0-5 years of experience
- Performed Quality Control inspections as a CWI, verifying each spool was fabricated to applicable code and customer specifications, qualified welders welded each spool to applicable WPS, and all materials met applicable code and customer specifications.
- Last Major job through the shop was the IHI/Kiewit ONE Cove Point LNG Expansion (B31.3,B31.1,B31.8)
- Administered various weld tests in order to qualify Welders to meet customer requirements.
0-5 years of experience
- Supervised 5 fabrication shops with multiple welders working with-in
- Performed testing of products at specific stages to ensure meeting of quality measurements including dimensions performance and correct chemical makeup
- Inspected welds for quality standards.
- Rejected inferior products and inferior welds.
- Read and interpreted engineering documents
- Ensure all workers follow safety guidelines including proper machine guarding as well as lockout and tagout procedures.
- Helped welders set up and operate stress relief ovens adhering to welding procedure parameters.
10+ years of experience
Certified Welding Inspector (CWI) Interprets drawings and other documents. Verify WQTR, WPS are filled out correctly. Verify that the equipment, consumables are certified. Witness performance and test of weldment assemblies, supervise activities performed by outside agencies. Verify welding joint geometry meets procedure and drawing requirements. Verify that work conforms to requirements of the applicable standards, drawings, or other documents. Verify that visual and other non destructive examinations have been performed by qualified personnel. Prepare clear and concise reports. Verify that records of welding procedure qualification, and the welding operator’s qualification, the control of welding materials are maintained
- Certified Welding Educator (CWE) Educated Floor Inspectors and Welding Operators what weld discontinuity are; cause and remedies. Corrective action on how to fix the defects/ discontinuities. All welding.
- Certified Level II Liquid Penentrant Inspector (PT) Verifies welds meet (VT) Visual inspection requirements of the drawing and specifications before performing liquid Penentrant inspection.
- Certified Level II Mag Particle Inspector (MT) verifies welds meet (VT) Visual inspection requirements of the drawing and specifications before performing Mag Particle inspection.
- Journeyman Welder Welding varies types of metals and components. Armor vehicles, Caterpillar, and various weld repairs. Metals range from mild steel to armor to specialty metals like Titanium, Aluminum.
10+ years of experience
Fracture Critical Control Qualified / Certified Level I + II UT/MT; ACI certified tech 2000-2014
- California Transportation and Metro Rail Inspections of Bridge and Rail Projects
- Performed UT Inspections on Rail Head Fusion + Thermite Welds
- Inspection of Rail Head Welds for Container Cranes L. A. Harbor
- DSA Inspections; L.A.U.S.D.; California Universities
0-5 years of experience
Visually inspected welds from the front end to the firing line on pipeline laterals.
- Assured the proper coating and holiday detection on line pipe and pipe fittings.
- Overseen the lowering in and shading of pipeline laterals.
- Onsite inspector for the fabrication and installation of the sales lines for gas and crude from the well connects.
0-5 years of experience
- Walked down and closed out packages according to specifications.
- Fill in for management over site of contractors as needed.
- Shift lead and NDE coordinator on night shift for 8 months toward the completion of project.
- Witnessed hydrostatic and pneumatic testing of piping.
- Witnessed setting of equipment and verification of pump alignments.
0-5 years of experience
- Perform Visual Inspection of welds and materials.
- Track welds and piping materials.
- Track station positions and monitor contractor progress.
- Oversees the execution of the hydrotest procedures.
- Witnesses and signs-off on all hydrotest procedure hold points.
- Utility inspection of ROW clearing, ditching, lowering in and clean up when necessary.
- Insure customer’s procedures and safety protocols are being followed.
0-5 years of experience
- Conduct receiving inspections
- Inspect fit up and welding of traffic signal poles, and roadway lighting poles to ensure they are in compliance with the drawings, customer specs and welding
- Document all non-conforming products.
- Enforce the procedures in the quality manual.
0-5 years of experience
- Client Lead Welding Inspector
- Monitor and oversee Welding Procedure Qualifications for pipe in pipe deep water project (Odd Job / Barataria / South Santa Cruz
- Monitor and oversee mainline and remedial welding.
- Monitor and oversee pipe stuffing and insulation operations.
- Monitor and oversee water stop, buckle arrestor and centralizer installation.
- Offshore installation lead.
0-5 years of experience
- I oversaw the welding, NDE and redline drawing, lowering in and tie-ins of fabrication pieces.
- Constructed daily reports of activities, equipment arrivals, part acceptance and photos of progress.
- Review reports submitted by CWIs on locations in my area.
- I tested welders for certification to TransCanada standards and practices.
- Review procedures and standards with new CWIs added to project as needed.
- Review and auditing of radiographic film and paperwork submitted by NDE contractors.
- Review and audit of NDE practices from NDE contractors.
0-5 years of experience
- Weld Mapping
- Padding, Holiday Testing, Backfill Inspection
- Bolting and Torque Inspection
- Hydro Test Supervisor
- Pigging Inspection Sizing, Brush, Drying
- Well Pad Spur Lines
0-5 years of experience
- Roustabout battery builds, welding, and cut pipe.
- Lead welder.
- Fabrication of structures consisting of plate, beams, channel iron, angle iron, and pipe in accordance to drawings and codes.
0-5 years of experience
- Visually inspect the fit-up and weldment of structural applications and process piping on carbon, stainless and duplex stainless steels including hyper-duplex (Safurex).
- Witness and record heat inputs and interpass temperatures during completion of weld runs.
- Inspect proper bolt-up sequence and witness torque of flanges and valves.
- Label and map weld inspections, red line isometrics and As-built drawings when needed.
- Witness PMI and P&IDs.
- Review of hydrostatic test packets and witness hydrostatic testing of pressure piping.
- Maintain a quality line of communication with company supervision and Quality Control departments.
- Keep a high awareness of job safety and positively encourage the use of personal protective equipment for myself and others.
Rate This Article
[Certified Welding Inspector]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
