- Featured in:
-
More Instrument Fitter Resumes
Use these Instrument Fitter samples as a guideline or visit our extensive library of customizable good resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Maintenance Resume Samples
Instrument Fitter Resume Samples
No results found
6-10 years of experience
- Production supervisor over Fluid Controls at for the last 2 yrs. Responsible for 25+ employees quality, production and safety
- Over saw all projects to ensure that the job was completed in a timely manner to achieve on time delivery
- Worked directly with engineers, customers and QC Inspectors to ensure work is completed per specifications.
- Responsible for reviewing schematics and P & ID’s to determine materials needed for fabrication of various skids
- Provided job scopes for various skid packages and material take off required for fabrication and installation.
- Fully assembled and fabricated, bent and installed all hydraulic and pneumatic lines of to H.P.U.’s, diverter’s, jack up and B.O.P. control skids and various other topside equipment, also subsea B.O.P’s mux pods, acoustic pods and various other types of subsea equipment
- Assisted in F.A.T. following test procedures doing hydro’s, functionality, troubleshooting and commissioning of various skids. In the process changing out any seals of failed components during test
0-5 years of experience
Report and receive assignments, instructions, and direction from the site supervisor
- Maintain company tools and equipment
- Perform various clean-up activities
- Fabricate and install tubing supports (Cutting, drilling, or tapping angle iron and unistrut.)
- Fabrication and installation of stainless steel tubing systems (lay-out, fabricate, bend, and install)
- Mounting instruments; Pressure test / leak test installed tubing systems
0-5 years of experience
- Prepped and fit pipe and supports
- Read prints and Laid out supports
- Measured and fabbed tray, supports, and tubing for pneumatic lines to valves
- Read P&IDs and installed Instruments in correct location
- Became foreman and lead a group of ten skilled craftsmen in instrumentation
- Lead men to meet deadlines and exceed expectations
0-5 years of experience
- Bending tubing from 1/4 to 1 inch.
- Tubing on Gas Compressors, Gas seperators and process
- Fabrication of fiber glass trays for tubing
- Mounting Transmitters and planning the tubing.
- Assembling valves, meters and prep work for tubing.
0-5 years of experience
- Plan tubing system layout and installation according to specifications using drawings and sketches.
- Fabricate supports, brackets and stands using hand tools.
- Plan and install air pipe and dekron while understanding end devices.
- Review and proficient with P&ID’s and blueprints.
0-5 years of experience
Bending and installation of stainless and copper tubing
- Bending and installation of conduit
- Installation of cable and tubing tray
- Installation of panels, transformers, lights, receptacles and instruments
- Proper and safe use of hand tools, lifts, power tools and PPE
- Ability to read blueprints, drawings and details
6-10 years of experience
- Install instrument and electrical equipment in an industrial environment according to specifications designated by construction packages, as well NEC regulations.
- Repair and replace faulty equipment and wiring.
- Install communication cabling and fiber optics.
- Submit redlines and revisions to the engineering group as needed.
0-5 years of experience
- Build instrument enclosures per specifications
- Connect tubing to pipe taps according to P&ID’s and ISO’s
- Build supports and trays for single and multiple tubing racks
- Draw “as built” ISO’s of tubing for heat trace department
- Install various temperature and pressure instruments on pipe taps
- Train helper
0-5 years of experience
My responsibilities included installing new equipment
- Stainless steel tubing
- Pressure transmitters
- Actuators
- Auto/manual controllers
- Level switches
- Regulators
0-5 years of experience
Assist journeyman or fitter
- Organizing and gathering materials and tools
- Fit instruments
- Cut and bend tubing
- Dekron and steam trace
- Cut and fab strut/cable tray
- Vic pipe
0-5 years of experience
Testing of Formation Fluids.
- Chloride and Water weight
- API (American Petroleum Institute) Gravity
- Shrinkage
- Gas Gravity
Instrument Fitter Duties and Responsibilities
Instrument fitters primarily assemble equipment and tools, though their day-to-day roles may vary based on their particular skill sets and the type and size of their company. However, after reviewing multiple listings, we’ve identified several tasks common to most instrument fitter jobs:
Interpret Blueprints and Instructions
Instrument fitters start by reviewing detailed blueprints, drawings, plans, and instructions for the tools and equipment they’re going to assemble. They must understand how to read these guides and apply them without error, which requires analyzing and implementing highly technical data.
Assemble Instruments and Tools
With the help of schematics and blueprints, instrument fitters put together precision instruments, tools, and systems ranging from electrical to plumbing.
Select Appropriate Tools and Equipment
Instrument fitters need in-depth knowledge of the various power tools and other equipment used for instrument fitting and assembly so they can choose the correct tools for each job. In addition to hand tools, they may also operate heavy machinery such as forklifts.
Cut Materials
To make tools and systems, instrument fitters must often first lay out, measure, and cut piping and other materials used to make the equipment and instruments they’ll assemble. Precision is paramount for this task, so it’s often something they spend a great deal of time on.
Test Equipment
After they’ve assembled the instruments and tools, instrument fitters conduct quality control checks to ensure they’re put together correctly and functioning properly.
Perform Maintenance
Instrument fitters regularly inspect all work areas, tools, and equipment, cleaning them after use and repairing machinery as needed. They also set up work areas and position and calibrate equipment.
Instrument Fitter Skills and Qualifications
Strong technical and physical skills are crucial qualities for instrument fitters. Employers typically seek candidates with the following traits:
- Physical fitness – instrument fitters may stand for extended periods and also need the physical strength to safely operate heavy machinery and tools. They also need dexterity and fine motor skills to assemble small and sometimes delicate parts
- Safety knowledge – this job frequently requires handling heavy tools and equipment in addition to operating tools that have blades or other sharp components. In addition, instrument fitters may install electrical systems or assemble electric tools, requiring an understanding of safety procedures and the proper use of gloves, goggles, and other protective gear
- Good vision – assembling instruments often requires looking at items closely to assemble small parts and spot any mistakes or defects
- Reading and comprehension skills – instrument fitters used detailed instructions and plans to guide them, and must know how to interpret written and verbal instructions as well as drawings
- Versatility – it’s common for instrument fitters to assist in tasks outside of their direct duties, so it’s important that they have a wide range of technical knowledge and the ability to quickly change gears
- Collaboration – while instrument fitters typically work independently, they sometimes consult with other members of the design team
Instrument Fitter Education and Training
Training and education requirements vary by employer, but many instrument fitters only need a high school diploma or GED. Many instrument fitters learn on the job, but some employers prefer candidates who have previous experience. Applicants often prove their experience and skill by taking a pre-employment test. Instrument fitters also typically need a driver’s license and must pass a drug test and background screening.
Instrument Fitter Salary and Outlook
Instrument fitters, categorized as assemblers and fabricators by the Bureau of Labor Statistics (BLS), earn a median annual salary of $31,850. For those in the top 10 percent, annual salaries can exceed $53,120. For those in the bottom 10 percent, they make less than $21,270 per year. The BLS expects employment opportunities in this field to decrease 14 percent through 2026, due to a reduced need for dedicated instrument fitters as manufacturing becomes more efficient and requires fewer workers.
Helpful Resources
Ready to launch your career as an instrument fitter? We’ve compiled a list of valuable resources that can help you get started and enhance your employment prospects:
Industrial Workers of the World – designed for industrial workers in all fields all over the world, this professional association advocates for its members and features committees that focus on everything from research to equal rights regardless of gender
Fabricator Red-Hot Career Guide – land your dream job in instrument fitting, assembly, or fabrication with this in-depth guide to interviewing that includes 2,500 potential interview questions and how to answer them
Beginner’s Guide to Reading Schematics – instrument fitters often use schematics to guide their work, so understanding how to read them is crucial. This introductory text explains how to read and interpret schematics and plans and use them to assemble systems and tools
Rate This Article
[Instrument Fitter]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
