- Featured in:
-
More Maintenance Mechanic Resumes
Use these Maintenance Mechanic samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Looking for cover letter ideas? See our sample Maintenance Mechanic Cover Letter.
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Maintenance Resume Samples
Maintenance Mechanic Resume Samples
No results found
0-5 years of experience
As lead mechanic, I was responsible for completing daily work orders responding to station emergencies requiring repairs to pumps, mechanical gear failures, and industrial piping and valve failures.
- Provided essential mechanical support for electricians troubleshooting three-phase pump motors.
- Possessed multiple certifications for pumps and motors, pump motor alignment, TCEQ regulations, PEP protection, following lockout tag out procedures and OSHA standard safety guidelines.
- Demonstrated ability to work ender extreme climate conditions, long hours, hazardous environments and extreme physical conditions.
- Participated in on-call rotation system and volunteered for secondary tankard support on-call.
0-5 years of experience
Performed changeover, set-up of trouble shooting mechanical/electrical of equipment.
- Monitored lines to ensure packaging lines and equipment are functioning normally, and make necessary adjustments as may be required to keep the lines running.
- Completed tear down of all equipment for cleaning and processing, inspected parts for wear, tear and damage, replaced parts if needed to produce quality products.
- Performed necessary repairs to recover from component failure, identify defective components, specify and communicate to supervisor, parts needed to make repair.
- Practiced Good Manufacturing procedure as trained in cGMP.
- Executed scheduled Preventative and Predictive Maintenance and planned work, and documented the services performed.
0-5 years of experience
Attended to daily maintenance duties including landscaping, electrical work, plumbing, painted, installed dry wall, plastering, and spackling.
- Oversaw the general appearance and condition of the property and maintained a organized office environment.
- Filed work orders and time sheets, set up appointments and answered telephones.
- Communicate efficiently and effectively with co-workers and tenants in order to insure the work order is completed correctly and in a timely fashion.
- Able to grasp new concepts quickly.
- Produce quality work and deliver service in a pleasant and professional manner.
0-5 years of experience
In charge of Preventative maintence repairs including Feeder Controls, Molds and Mold Bodies, Hydraulic systems, Pneumatic systems and other mechanical designs.
- Successfully planned and created permeant mold locations in order to ease access and ability to swap out molds without to much interference.
- Instituted Strict Quality Assurance Guidelines and strict rules for Good Engineering Practices in areas that were lacking.
- Installed new Procedures and equipment to maintain accurate oil levels in Mold Centrifuge’s and Nose Bearings.
10+ years of experience
Responsible for all aspects of trouble shooting, preventative and corrective maintenance for a wide range of Centrifugal pumps, positive displacement pumps, agitators, lobe pumps, air compressors mechanical seals and gear reducers.
- Tracked operations and built a history on pump seal failures. Worked with seal vendors to redesign the seals to maximize their life on pumps, reducing downtime and cost.
- Maintained preventive program to keep equipment operating to minimize down time increase productivity and maximize equipment life.
- Implemented documentation procedures for corrective and preventive maintenance for tracking trends in equipment failures to highlight problem areas with equipment that need preventive procedures modified.
- Migrated from Dynastar to SAP, incorporating inventory control, work orders, and scheduling.
0-5 years of experience
Assembled new motorcycles and ATV’s
- Dismantled engines and repair or replace defective parts, such as clutches, carburetors, and gears.
- Following inspection, repaired or adjusted parts that do not work properly or replace unfixable subassemblies like, brakes, and drive chains, in accordance with repair manual specifications
- Followed manufacturer’s repair checklist that usually includes detailed check up and cleaning of air intakes, electrical systems, carburetors, plugs, and other parts
- Mounted and Balanced tires, and replace worn valve stems
0-5 years of experience
Repaired mechanical and electric machinery and replaced worn and defective parts.
- Performed preventive and regular maintanence on building and production machinery
- Refined and troubleshooted, debugged mechanical components, electronic, electrical circuits.
- Performed rotinue heating, ventilation and air conditioning system maintenance.
- Duty of Purchasing of parts from supply companies (i.e. Grainger and McMaster Carr) within budget.
- Assisted in the development of safe standard operating procedures for company and employees.
0-5 years of experience
Responsible for the maintenance of company and private owner vehicles among a wide array of specialized and complex systems
- Successfully diagnosed and fixed an array of problems from electrical, wiring, vehicle upkeep, all the way to cosmetics
- Worked efficiently and kept within deadline while achieving the best outcomes and resolving issues
- Ensured work station was clean and well organized
- Recording data and documentation
6-10 years of experience
PM and repair of rechargeable battery assembly machinery (paste mixing, tab stakers, slitters, dies, winders, fillers, resistance welders, beaders, packaging, test equipment, and conveyors)
- Troubleshoot electrical, pneumatic, and hydraulic systems
- Performed process optimization which resulted in nonconformance elimination
- Adhered to and participated in company safety policies
0-5 years of experience
Troubleshoot, diagnose and repair malfunctions in electrical, mechanical, painting, plumbing, tiling, flooring, and install new/replacement equipment and materials.
- Responsible of drywall installation and wall preparation including damage and hole repairs.
- Prepare and matches paint for interior/exterior.
- Read and interpret equipment manuals and work orders to perform required maintenance and service.
- Safely operates electrical and air powered tools, welding, and other mechanical tools, snow removal and salt spreader equipment and/or other heavy equipment assigned to the department.
- Maintain a safe and orderly work environment and follows all safety protocols.
- Works effectively under pressure in a fast pace environment and with minimum supervision.
6-10 years of experience
Provide complete professional cleaning and maintenance services within contracted hours
- Exceeded daily and monthly quota consistently by managing time efficiently
- Achieved superior track record developing a high level of customer service that required being on call for emergency needs
- Established a well working relationship with banks and insurance companies
0-5 years of experience
Maintain and repairs on all equipment such as zero turn mowers, saws, snow removal vehicles, trucks and trailers.
- Responsible for helping 5 co-workers keep grounds around terminals at airport clean, bushes trimmed and mowing grass, snow removal on runway and taxiways during winter season.
- Equipment operator on Kodiak snow blower, Loader, Case, Bobcat, Tandem dump truck, Broom for snow removal, wood chipper, stump grinder, scissors lift, Forklift certified.
- Training on all aspects of safety from clothing to machinery.
- Capable of running Arc welder, Mig-welder, Plasma cutter, Table saw, Band saw (wood and metal).
- FBI – Government clearance and finger printed. AOA badge clearance to any part of airport.
10+ years of experience
Responsible for all aspects of building and facilities maintenance at this 55 acre 15 building campus site.
- Responsible for all trades including: electrical, HVAC, plumbing, pipefitting, carpentry soldering/brazing, irrigation systems, painting, boilers systems, hot water heaters, flushometers, acoustical drop ceilings, compressors and refrigeration.
- Primary responsibility for all facets of electrical work including: panel service, multiphase wiring, outlets/lighting circuits, underground power lines, exhaust fans, control circuitry and dedicated outlets.
- Skilled in working with cooling towers, heat pumps, circulator pumps, furnaces, split systems and energy management systems.
- Proven skill to troubleshoot and evaluate problems and resolve in an effective timely manner.
- Handle all preventative maintenance, manage projects, coordinate and supervise outside contractors.
- Demonstrate proven communication and interpersonal skills dealing with all levels of management as well as fellow staff employees.
- Able to work independently or as an integral part of a project team with demonstrated skills as a Team Leader.
0-5 years of experience
Diagnose and repair Cheese Packaging machines and all supporting equipment as well as building repairs as needed
- Manufacture components when necessary to update, modify or repair equipment using machine tools such as lathes, milling machines and welding equipment
- Install electrical and mechanical equipment for new installations or to update current equipment
- Communicate with operators, supervisors and other company personnel to ensure prompt, accurate and efficient service
- Quickly adapted to the new environment to become a team player on the second shift maintenance team
- When given tasks I have consistently completed them on time and in the requested manner
0-5 years of experience
Carried out Preventive & Corrective Maintenance of Hydraulic Presses, Flex Board Die Cutting Machine, Screen Printing Stations, Robotic Parts Assembling Machine, Etching machine, Oxide Cleaning Machine, Gold Plating & Nickel Platting Machines & Soldering and De-Soldering Equipment.
- Repair and Maintenance of high speed CNC Drilling & Routing Machines.
- Troubleshooting and Maintenance of above Flex Circuit Board Production Machines.
- Repair, rework, and calibrate hydraulic and pneumatic assemblies and systems.
- Repair, upgrade and install Exhaust Fans & Air Make up units.
- Repair & Maintenance of Plant Facilities.
- Carry out requirements of Preventative Maintenance programs.
10+ years of experience
Disassemble broken or defective equipment to facilitate repair and reassemble equipment when repairs are complete.
- Install or replace machinery, equipment, and new or replacement parts and instruments, using hand tools or power tools.
- Perform routine preventive maintenance to ensure that machine continue to run smoothly, building systems operate efficiently, or the physical condition of building does not deteriorate.
- Wall repair and painting. Ceiling tile repair or replace.
- Examine and test machinery, equipment, components, and parts for defects to ensure proper functionary.
- Adjust, connect, or disconnect wiring, piping, tubing, and other parts, using hand tools or power tools.
0-5 years of experience
Preventive maintenance on compressors, conveyors, power washers and water filtration.
- Minor electrical installation troubleshooting and repair.
- Fabrication of multiple structures with various methods of welding, machining, and mechanical construction.
- Trained two mechanics for individual management of entire departments.
- Troubleshot and repaired automated conveyor system controlled by Allen Bradley PLC’s.
- Building maintenance.
10+ years of experience
Proficient in reducing costs/downtime and increasing productivity/efficiency in facility maintenance department
- Certified in Fire Command Center (FCC). To operate and supervise all alarm systems, elevator systems, etc. Maintain radio control throughout building to all maintenance department heads on safety problems and procedures.
- Hired to assist with all General Maintenance areas throughout casino and Hotel
- Constructed and assisted with all aspects of event planning and preparation for Mid-High Level Events.
- Highest Level of Customer Service assistance prior to and during event
0-5 years of experience
Performs maintenance and repair of all facilities and equipment. Performs preventive maintenance and repair duties on all mechanical and electrical systems equipment and tools.
- Maintains and repairs heating, cooling, electrical, plumbing and contruction works.
- Remains informed of changes in rules and procedures as required to correct deficiencies and improve performance.
- Performs all routine and necessary repairs on slot equipment, machines and shufflers.
- Installs slot machines.
- Maintain records and submit regular and special reports as assigned.
- Follow safety policies and procedures, reports all safety hazards and follow up to insure hazards are eliminated.
0-5 years of experience
Inspect vision system for blade assembly
- Performed change overs, cam followers, and rod ends
- Set up and maintained production lines
- Supervised and trained on all new employees on safety procedures
0-5 years of experience
Extensive knowledge of hydraulics, grease and pneumatics systems, power transmission and pumps.
- Advanced experience troubleshooting equipment and systems under severe pressure and time constraints.
- Ability to read and understand blueprints and schematics both hand draw and CAD.
- experience with welding and fabrication. Ability to weld SMAW (carbon and stainless), GMAW (carbon, stainless and aluminum), FCAW and GTAW (carbon, stainless and aluminum). Some experience with welding pipe 6G.
- Certified to operate manlifts (up to 135′), class 4, 5 and 7 forklift trucks and Yard Mule trucks.
- Member of Fall Protection Safety Committee and Confined Space Rescue Team
0-5 years of experience
Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Disassemble machinery or equipment to remove parts and make repairs.
- Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Analyze test results, machine error messages, or information obtained from operators to diagnose equipment problems.
- Cut and weld metal to repair broken metal parts, fabricate new parts, or assemble new equipment.
6-10 years of experience
Oversee daily operations and schedules associates with the maintenance, service, and repair of all HVAC.
- Responsible for all pm’s / schedule.
- Oversees the works of contractors, including HVAC and kitchen equipments, from start to completion.
- Responsible for rapid response on all guests/room problems to include but not limited to mechanical, electrical, plumbing, fan coil units/heat pumps and touch up painting, minor repairs, carpentry, etc.
- Perform administrative duty when the supervisor is not available.
- Insure that proper maintenance and repair procedures are followed.
- Coordinate with the planning, ordering parts, or upgrades in HVAC equipment with budget management.
10+ years of experience
Identify causes of equipment malfunctions and fixed it, overhaul and repair all equipment
- Operate, inspect and carry out maintenance of envelope machines, forklifts and other equipment
- Perform urgent, corrective and routine repairs in mechanical, carpentry, plumbing and other equipment
- Troubleshoot and repair all types of problems
- Carried out general maintenance to buildings and grounds
- Document repair actions and turn logs into management on a daily basis
- Maintain supplies to affect common repairs and order new stock as needed
10+ years of experience
Took apart, inspected, and changed sprockets, chains, bearings, and worn belts as needed for conveyors and incline belts.
- Inspected and rebuilt Submersibles, Vaughn, Marlow, Mono style pumps.
- Inspected and changed worn out parts, bearings, gears, and mechanical seals.
- Took apart, air tested, inspected, and rebuilt Rotary coils.
- Replaced new bearings, sub shafts, and packing of Rotary coils as needed.
- Changed out H and G dicers blades.
- Safely operated forklifts, cranes, man lifts, and scissor lifts.
0-5 years of experience
Maintained and operation of machinery to package food product for government/ military contracts, grocery stores and candy companies.
- maintain equipment and machinery for a food processing plant.
- Electical, electronic, plumbing, vacuum lines, compressors and any plant
- Co-supervised 10 employees when necessary.
- Experience with Allen Bradley, All-Fill equipment, Cerebus controls, rotary valves, servo motor, Action Pak/cup fillers/duck bills, Hayssen VFFS series bagger/ controls/ PLC, machine tooling, Ultra ST/ AMI zipper and Watlow heater controls.
- Low voltage systems 12/24 volt
- 208 & 120 volt systems/ single & 3 phase components.
6-10 years of experience
Inspects equipment, tools, and working conditions to ensure safety of workers engaged in construction and maintenance of overhead and underground power lines.
- Conduct and participates in complaint investigations with federal and state agencies for approved plans.
- Conduct detail inspection of all signs of deterioration, including leaks, hollow sounds, loose tiles, cracks, and nicks.
- Conduct and participates in field inspection of HABC properties for utilities inspection, quality control, document control for state review.
- Provide advice to vendors, contractors and property owners on code and permit requirement.
- Review daily work orders to ensure tenants move-In are secure.
- Perform and Compile weekly field PM Inspections to ensure [company name] compliance with HUD, Federal Laws and regulations safety issues.
- Observe crews at work and reports laxity in safety precautions, such as failure to use goggles, rubber gloves, and other safety devices.
6-10 years of experience
5+ years of experience in maintenance repair and technical experience in military operations maintenance.
- Accountable for military equipment worth over $300,000 on a daily basis and maintaining repair on hydraulic systems electrical circuits and other type of equipment.
- Kept operational ground systems such as generators ranging from 2KW to 60KW, and any diesel or gasoline powered equipment serviceable, as well working closely with Supervisor and other departments to ensure equipment was maintained and out of risk of any break downs.
- Succeeded in rapidly troubleshooting, installation, analysis, maintenance and repair of company’s systems to component level.
- Proficient with a variety of hand tools, diagnostic tools, power tools, multi-meters.
- Perform other, related duties as assigned. Well-rounded training and experience usually acquired through formal apprenticeship or equivalent training and experience. Perform other duties as assigned.
- 5+ years of cross-training with Preventive Maintenance on military equipment with the United States Army.
- U.S Army FT LEE, Virginia Ordnance School /Chemical Equipment Repair Technical Degree
- .Credit recommendation (45 hours) from the American Council on Education Washington, D.C.
- EPA 609 Certification/MVAC.
6-10 years of experience
Responsible for the maintenance and repair of various production and package equipment.
- Troubleshoot, diagnose, repair and replace various machinery components such as: pumps, valves, guards, forming equipment and sealing machinery at room temperature up to 400 degrees.
- Dismantle of defective machinery and equipment to gain access of problem areas.
- Inspect and measure parts to detect wear, misalignment and other possible problems.
- Testing of machinery and equipment after repairs are made to ensure proper function prior to release back into production.
0-5 years of experience
I preform work in Security Identification Display Area (SIDA), and as such I have all required identifications with U.S. customs seal.
- I determine work methods and procedures and participate in mechanical assignments as well as the responsibility for the quality of work produced.
- I Read sketches, diagrams and blueprints in order to complete required tasks.
- I check and inspect the equipment and I’m responsible for making required repairs in order to ensure the flow of customer luggage from ticket counter to the various airline ground crews
- Due to time constraints I Keep records of materials used and make estimates of time required for assigned tasks in order to ensure little or no down time of baggage system.
0-5 years of experience
Responsible for maintenance and repairs, including plumbing, electrical, and lighting duties.
- Accountable for apartment grounds, equipment, irrigation systems, and units.
- Possess HVAC experience to maintain air conditioning and heating systems.
- In charge of painting, repairing furniture, carpet cleaning, and repairing small appliances.
- Responsible for ordering supplies, inventory, inspections, organizing current/previous work orders
0-5 years of experience
Start up plant every morning, ensure every piece of equipment is in operating order
- Respond to breakdowns, troubleshoot and fix problem as quickly and efficiently as possible
- Responsible for assigned PM’s, work orders, keeping plant running with as little down time as possible
- Building maintenance, painting, patching, plumbing, replacing bad ballasts/bulbs in fixtures
0-5 years of experience
Provide routine preventative maintenance to ensure that machinery continues to run smoothly and efficiently.
- Inspect, operate, and/or test machines and equipment to diagnose problems and repair and/or replace defective parts.
- Inspect drives, motors, and belts, check fluid levels, replace filters, and perform
- Clean and /or lubricate shafts, bearings, gears, and other parts of machinery.
- Operate cutting torches and welding equipment. Familiar with autocad drawings and replication.
- Keep daily maintenance log.
0-5 years of experience
Trouble shoot and repair mechanical presses ranging from 1600 tons to 8000 ton presses
- Use mig and flux welding, cutting torch, and grinders for general fabrication
- Repair, oil, and adjust machines using tools.
- Work on hydraulic and pneumatic systems on presses
- Perform routine and preventive maintenance on presses and robots
0-5 years of experience
Served as lead mechanic for maintenance and repair team
- Maintained production line machineries at peak efficiency to meet production goals
- Installed and operated machinery
- Ordered parts and maintained inventory
- Experience with high speed conveyors, motor controls, photo eyes, proximity sensors, gear boxes, servo motors, hydraulics, pneumatics, WEBER 904 Slicing machine, RAPID PAK, MULTIVAC Packaging system, ACCUSORT AND INTERLEAVER Conveyor systems
- Maintained 5 slicing lines running to high production levels
0-5 years of experience
Participated in operations of teams of 40 employees the serviced, repaired, and diagnosed a fleet of over 400 trucks in supporting military overseas transportation operations
- Repaired, replace, and serviced multiple engines, transmissions, and drive train components
- Experienced with handling and safety of hazards material, petroleum liquids
- Performed routine preventive maintenance to ensure that machines continue to run smoothly
- Diagnosed mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary
- Cleaned and lubricate shafts, bearings, gears, or other parts of machinery
- Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists
- Used tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices
- Tested machinery or equipment to diagnose malfunctions
0-5 years of experience
Troubleshoot both mechanical and electrical problems in a timely manner for production support for a variety of different types of equipment.
- Help support the freeze dryer technicians to make sure that they are running so we don’t lose a load or have any setbacks.
- Perform scheduled maintenance to keep machines from breaking down.
- Medical clean room environment trained.
- Customer service have to maintain a good working relationship with the operators with quick and clean maintenance and trust.
10+ years of experience
Performed overall maintenance for the entire plant.
- Provided daily maintenance on all makes and models of fork lifts
- Completed repairs to electrical, plumbing, commercial refrigeration, air conditioning, heating and boiler systems.
- Completed building repairs such as painting, drywall, furniture, lighting and any needed building repairs.
- Provided coverage for Plant Engineer.
0-5 years of experience
Perform general maintenance, servicing, and troubleshooting duties
- Carrying out all work order requests immediately to ensure they are completed effectively.
- Diagnose, repair, install and maintain various types of industrial equipment and electrical systems.
- Install, repair and maintain plumbing fixtures using hand tools and power tools.
- Maintaining facility by providing interior painting as needed; preparing surfaces by scraping; using commercial paint removers; filling cracks and holes; sizing plaster walls, sheetrock finishing and applying special finishes
- Stripping and waxing floors
6-10 years of experience
Maintenance and troubleshooting on all plant equipment.
- Pipe fitting and maintenance on pumps, bearings, gearboxes, and compressors.
- Repaired and installed hydraulic and pneumatic systems and controls.
- Repaired and installed centrifugal and positive displacement pumps.
- Performed welding and valve replacement on piping systems.
- Oiler lubrication on all plant machinery.
0-5 years of experience
Hydraulic pump, cylinder and valve rebuilding
- Maintained, repaired and troubleshooting of hydraulically driven pipe straightening machines and ram lift stations
- Maintained, repaired and troubleshooting of CNC mills and lathes
- Maintained, repaired and troubleshooting of Inertia welding machines
- Maintained, repaired and troubleshooting of upsetting equipment
- Maintained, repaired, troubleshooting and installed machine component parts and hydraulic systems
- Maintained, repaired, troubleshooting and installed Repair, pneumatically controlled systems and steam systems
0-5 years of experience
Perform preventative maintenance on all machines including, but not limited to, densifiers, shredders, scale belts, mechanical and electrical (including PLC’s)
- Rebuild and replace cutting dies shafts and bearings, drive belts, and gear boxes
- Clearing and fixing conveyor belt systems
- Safety Committee member including, but not limited to, safety lock out/tag out implementation, hazard materials and fire extinguishers
- Fabricating and installing machine guards
- Fork truck certified
0-5 years of experience
Preformed maintenance and repairs on large industrial machines
- Handled welding
- Painted equipment
- Installed electrical wiring
- Miscellaneous duties as assigned
- Large CNC, lathes, drill Press, sandblaster, HVOF robotic plasma sprayer and wire arc, Laser cuter and welder, electrochemical grinding machine, furnaces, replaced fuses and breakers, repaired HVAC systems, repaired pneumatic and hydraulic systems
6-10 years of experience
Dismantle defective machines and equipment and install new or repaired parts.
- Perform routine preventative maintenance, major and minor repairs, troubleshooting and resolution of breakdowns or out of control situations.
- Assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment.
- Repair and maintain physical structure of plant.
- Set up and operate machine tools to repair and/or fabricate parts, jigs, fixtures and tools
0-5 years of experience
Performed all testing and verification of equipment, product, packaging, and coding parameters as required by SOPs, and according to the specification for the specific product being manufactured.
- Calibrated and cleaned equipment to ensure results are correct.
- Assembled and reassembled the equipment according to the need of the products being
- Followed all applicable safety standards / safety rules in the work area.
0-5 years of experience
Troubleshooting / maintaining / repairing electro-mechanical systems, pneumatic and hydraulic machine operations, electric motors, conveyors etc.
- Control downtime by performing routine preventative maintenance.
- Fabricate repair parts by using machine shop instrumentation and equipment.
- Maintain equipment, parts and supply inventories by anticipating needed equipment, parts, and supplies.
0-5 years of experience
- Repaired processing equipment, piping vessels, valves and controls
- Fabrication, welding and conveyor systems experience
- Assembly and disassembly of packaging equipment
- Jones cartoners, table-top conveyors, BFB bundlers and Nordson glue guns
- Operation of Bridgeport CNC mill and lathe
- Adjusted all process equipment
Rate This Article
[Maintenance Mechanic]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
