- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Maintenance Resume Samples
Repair Technician Resume Samples
No results found
10+ years of experience
Assembled, installed, tested, maintained, and repaired photographic equipment throughout Southeast, Michigan (averaged 4-5 service calls per day)
- Provided technical assistance and training to customers i.e. Target, Wal-Mart, CVS and Rite Aid
- Created time and material reports to ensure accurate invoicing
- Established and maintained effective customer relationships
- Upgraded older analog film machines to digital versions. Installed Kodak computers that enabled our customers to convert from a wet film process to a dry printing process
0-5 years of experience
I worked with the technicians and customers to fix all voice issues from changing ports to putting new configs in the router (2400, 2800 and 2900 series).
- Performed end to end translations for lines & trunks in the switch platform, 5E, DMS and SONUS
- Successfully Managed and Configured all Routers for Phase 1 (VoIP, Data, BBL Lines) and for Phase2 (VoIP, 1.5 Meg to 10 gig, CAS trunks or PRI
- performed DACS mapping in Alcatel, Titan, Navigator, and GR-303 voice concentrators.
- Fixed all broadworks, Sonus issues.
10+ years of experience
Debugging customer’s hardware, software problems, and resolved or repaired with new and reconditioned parts. Repaired circuit boards and hard drives, updated firmware and installed third party software. Provided outstanding customer service and tech support via phone and email in bilingual English/Spanish.
- Created repair technician procedures guide to standardize workflow processes and improve quality. This guide was implemented across the organization.
- Awarded employee of the month for outstanding achievements in exceeding productivity and quality goals.
- Served on safety committee to identify opportunities to improve safety in the workplace, and maintained CPR certification for first response preparedness.
0-5 years of experience
Equipment readiness inspections to include all analytical process system, and reporting requirements.
- Performed profitable estimates in shop and on-site for repairing all and specialized janitorial equipment such as extractors, ride-ons, commercial vacuums, buffers and ability to read schematics and complex drawing diagrams and equipment troubleshooting.
- Trained and mentored new technicians on equipment repair and preventative maintenance.
- Responsible for dispatching technicians to daily work sites and evaluating their daily work schedules.
0-5 years of experience
Diagnosis, disassemble, reassemble computer back to new or refurbish condition
- Inspired each and every team member to perform and meet daily quota number, teaching and helping each team member easier skills to repair. Teaching new work process, update new work process.
- Determined the duties and responsibilities of each individuals in my team to meet our goal and the production of the company, including helping other department
- Analyzed the individual performance of each team member and motivated them to perform even better.
- Reported any problem or fault in the project to supervisor and helping supervisor with new idea to make more production.
- Running unit’s parts hold report, collecting Beyond Repair unit, locating units and elevate aged unit in repair, run weekly department performance report.
- Make decision when supervisor is absent, maintain 5’s in department
0-5 years of experience
Performed comprehensive product debugging, troubleshooting, testing, repairs, evaluations and test/defect logging of analog/digital PCBs to component level
- Utilized soldering procedures to facilitate the removal and installation of PCB components
- Performed various test automation tasks using AutoTech and Scorpion
- Conducted meticulous testing and verification of storage systems
- Maintained, debugged, repaired, and tested electronic test apparatus to the component level
- Performed PCB fine pitch component installations, cabling, testing, troubleshooting, repairs, calibrations, and monitoring with various systems such as through-hole/SMT circuit boards, and computer hardware systems
6-10 years of experience
Responsible for assessing and repairing vehicle’s windshields to meet California safety standards
- Assisted in training new staff per company policies and procedures as repair-medics
- Provide high level of customer service to achieve company monthly quotas
- Consistently meet and exceed customer service feedback satisfaction surveys ranking among the top in the company
0-5 years of experience
In charge of the daily rental and maintenance/repair of a wide variety of tools.
- In charge of daily repair of customer owned tools small engine and electrical.
- Always maintained a clean and well stocked and organized repair bench.
- Recognized and rewarded for going above and beyond to make sure my work was thoroughly done.
0-5 years of experience
- Configured, upgraded and tested computer hardware
- Recorded configurations and repairs into PlanITROI database
- Accurately inspected, diagnosed and repaired computer hardware (notebooks, tablets, desktops)
- Organized and maintained technical facility
- Coordinated with team members for the purpose of completing projects/work orders efficiently
0-5 years of experience
Provided quality customer service to various commercial and residential clienteles
- Offered multiple services ranging from odor control to emergency water extractions on a 24-7 basis with professional expertise
- Ensured Company’s integrity and maintained customer retention by servicing clients with punctual response times
- Operated company vehicle
0-5 years of experience
Performed on-site repair and preventive maintenance on personal computers, printers and mobile devices.
- Evaluate technical issues.
- Solved customer concerns.
- Troubleshoot computer problems in an efficient and courteous manner.
- Built custom computers, scheduled work and ordered parts, estimated and invoiced repairs.
0-5 years of experience
Diagnosed, troubleshot, and resolved approximately 7-14 customers’ hardware/software issues weekly
- Installed and maintained anti-virus, firewall and security programs
- Performed preventative maintenance, including checking and cleaning customers’ computers and peripherals
- Assisted in imaging, setup and deployment of PCs
- Tracked PC and network related hardware
- Install and configure monitors, keyboards and printers
- Act as a technical resource in order to assist users with resolving computer issues
0-5 years of experience
Follow supervisor’s instructions as to which parts to restore or replace and how much time the job should take.
- Review damage reports, prepare or review repair cost estimates, and plan work to be performed.
- Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.
- Prime and paint repaired surfaces, using paint sprayguns and motorized sanders.
- File, grind, sand and smooth filled or repaired surfaces, using power tools and hand tools.
- Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders.
0-5 years of experience
Assisted other maintenance technicians in the repair and maintenance of equipment.
- Completed work orders, records, logs and other documents.
- Operated material handling equipment, battery equipment, moving machinery, and other powered equipment.
- Performed preventive maintenance and repairs on equipment: lift trucks, pneumatic systems, material handling equipment, hydraulic equipment, dock equipment, banana room equipment, electronic and electrical equipment.
- Read blueprints and electronic/mechanical schematics to repair and maintain equipment.
0-5 years of experience
Managed over $22,000,000 worth of serialized small arms weapon systems to include another $3,000,000 worth of serialized optical equipment on a daily basis.
- Administered valuable training to over 500 employees on equipment maintenance.
- Appointed as the subject matter expert for more than 1,000 crew served weapon systems.
- Completed 4 inspections consecutively with zero discrepancies.
- Supervised 15 employees on daily standard operating procedures to include asset accountability, monthly inventory, opening/closing procedures, and receiving/sending of assets.
- Reduced equipment maintenance by 15%
- Excelled in a position usually filled by a senior supervisor.
- Communicated with multiple supervisors on a daily basis on projects that were completed and future projects that had yet to be completed.
0-5 years of experience
Provided technical support for off-site activities
- Designed and maintained an inventory management system to support the mechanical maintenance program
- Received 1 commendation award for program management and support
- Worked with external representatives to facilitate the maintenance program success
- Provided logistical support to maintenance programs in Iraq
0-5 years of experience
Responsible for maintaining and troubleshooting various kinds of heavy equipment such as Mac dump trucks, rollers and milling machines, graders, pavers and loaders
- Handled tasks of repairing and replacing equipment parts such as drums, seals, electrical systems, lighting, gears, rods, hydraulic pumps and electric motors
- Perform task of installing and maintaining windshield wipers, radio, heaters and mirrors
- Handle responsibilities of fabricating and assembling components like power, industrial and machinery
- Perform tasks of repairing and replacing pistons, bearings, crankshafts, hydraulic drivers and clutches
- Handle tasks of repairing miscellaneous equipment like forklifts, welding machines and chain saws
0-5 years of experience
[company name] is a privately held company, established in 1999. It manufactures various data extraction, transfer and analysis devices for cellular phones and mobile devices. Specializing in specific business divisions of wireless carriers, retailers and government forensics.
- Daily check in for shipments of RMA units.
- Receive and Inventory defective units.
- Repair and Login damaged devices; Repairs consist of full tear down and inspection of devices for physical damage. Determine warranty status. Replace any damaged parts necessary; soldering. Re-image devices with proper BIOS. Note and compare defects with customers created RMA. Replace devices if necessary.
- Prepare repaired/replaced devices for shipment back to customers. Invoice customer for repairs/replacement if present.
- Knowledge of SalesForce
0-5 years of experience
In charge of making sure all PC get fixed and out to customer in timely manner with 2 workers reporting to me
- Make sure there is adequate replacement parts in stock to meet repair needs
- Refurbish laptops, desk stations, test stations, and various computer components
- Repair all PC’s & Laptops in timely manner consisting of various issues from Hardware and Software(Windows 7)
- Configure PC’s & Printer for issuance to customers
- Imaging PC’s with latest Windows 7 USARC build to conform with Army standards
- Repair and hardware related problems with Printers as needed
- Fix software related issues on hand-held scanners
0-5 years of experience
Worked to sell and buy computers, cell phones and accessories
- Repair software and hardware problems for computers and cell phones.
- Served customers to pay bills, activate and sell phone plans
- Answered all customer questions about phone plans for companies such as At&t, T-mobile, page plus, H2O, Simple mobile, Net10, Spot mobile and Go smart.
- Ordered hardware needed parts for phone and computer repair.
0-5 years of experience
Leading a refurbishment line, instructing temporary help on procedures for quality control and repairs for machines.
- Training repack worker on packing machines, and providing accessories for machines.
- Tracking inventory of parts, accessories, and machines in a warehouse facility.
- Licensed tow motor driver.
- Tracking calls in new call log system.
- All other duties consistent with previous Service Repair Technician work listed below.
0-5 years of experience
- Understood how to troubleshoot, diagnose and repair hardware and OS issues
- Communicated effectively with customers to understand their needs and convey information
- Communicated with team members on difficult problems
- Recorded all work with Zendesk, detailing all progress and anything that other techs needed to know
- Contacted customers for additional information if needed and for updates
- Personally researched solutions to difficult problems
- Taught less experienced techs by advising them and leading them through the diagnosis and repair
0-5 years of experience
Adjust or replace defective or improperly functioning circuitry or electronics components, using hand tools or soldering iron.
- Participates in regular meetings to improve quality, delivery, cost and safety
- Adjust, repair, or replace electrical or electronic component parts to correct defects and to ensure conformance to specifications.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Position, align, or adjust work pieces or electrical parts to facilitate wiring or assembly.
0-5 years of experience
Troubleshoot and repair laptop computers at the component level
- Installed Operating Systems such as Windows 7, Windows XP and Vista Home Premium
- Installed Antivirus and Anti Spyware software such as Symantec
- Configured Firewall settings, so proper security can be maintained
- Diagnosed LCD’s and replace as needed
- Expert at working on IBM/Lenovo models.
0-5 years of experience
Computer building, repair, and phone technical support
- Built, repaired, and wired asphalt control systems
- Electrical and electronic wiring
- Circuit board assembly, repair, revisions, and re-work
- Programmed in C# import and export of asphalt control system database and reports
- Programmed in C# automated software and driver installation utility
- Setup DOS/Windows 98/Windows NT/XP software networking
0-5 years of experience
Repair refurbished Cell phones with the help of work instructions on the computer.
- Order the parts on the computer according to the needs.
- Perform product validation and inspection across multiple models.
- Cosmetic parts replacement (e.g., antenna, battery, battery covers, front/back housings, main/caller ID lens, keypads) device reconditioning as required.
- Follow the rules and regulations of the company in the work area.
0-5 years of experience
Paint laundromat equipment on a regular basis using two part polyurethane
- Inventory and order all paint supplies
- Ensure all hazardous materials are stored and properly disposed when needed
- Perform necessary maintenance and repairs to laundromat equipment around the state of Texas
- Set up and prepare new stores for opening
- Maintenance and repairs done include: welding, fabricating, basic construction and electrical work
- Train and supervise new employees as needed
0-5 years of experience
Supported and tested newly released R&D products.
- Implement test procedures for newly released products.
- Programmed FPGA software and EPROM code based on the application and Board revision.
- Troubleshoot and repair failed boards to the component level.
- Calibrated Camera Optical Alignment for the D*TEC wood grader.
- Repaired and supported failed products from the field.
0-5 years of experience
Professionally repair deep scratches, scuff marks, and rock chips on painted autombile surfaces
- Wet sanding and bufffing with the ability to touch up or exercise full body work
- Full pre-sale/post purchase maintenance detail
- Mixing and matching colors for paint restoration
- Provide mobile services to wholesale and retail customers
- Generate estimates and write up invoices
- Communicating with customers verbally, on-site, and via telephone
0-5 years of experience
- Repaired various types of multi-channel radio equipment
- Managed and trained personnel
- Provided performance reviews for trainees
- Delegated work to subordinates