- Featured in:
-
More Water Plant Operator Resumes
Use these Water Plant Operator samples as a guideline or visit our extensive library of customizable resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Maintenance Resume Samples
Water Plant Operator Resume Samples
No results found
0-5 years of experience
- Monitored equipment operating conditions to determine requirements, detected malfunctions
- Collected and tested water samples, recorded operational data and gauge readings
- Operated equipment to process, purify and clarify water
- Maintained, repaired equipment, tanks and filter beds
0-5 years of experience
Currently works under the direct supervision of two licensed Water Plant Operators.
- Licensed Water Plant Operator.
- Learning duties and routines necessary to fully operate a water plant.
- Assists with valve, pump and various mechanical repairs.
- Conducts periodic plant inspections for well structure, infrastructure stability and water output.
- Performs basic chemical analysis and bacteria tests related to water quality sampling.
0-5 years of experience
- Ensures that all finish water complies with all local, state and federal requirements.
- Performs daily analysis of samples to confirm satisfactory results in chlorine and chloramine residuals.
- Conducts daily lab testing for PH, alkalinity, turbidity, fluoride, color, manganese and specialized other testing.
- Performs distribution of water using SCADA into various zones to ensure adequate pressure, water quantity, and acceptable chlorine residuals throughout the system.
- Executes daily filter operations and troubleshooting using SCADA system.
- Regularly performs preventive maintenance on pumps, motors, solution feeders, and chlorine analyzers on plant and throughout the distribution system.
0-5 years of experience
- Stay alert and be responsible to actively prevent and fight any incipient stage fires.
- Have a clear view of an immediate access to all areas of hot work
- Ensure that you have the ability to communicate with workers in the area of hot work
- Shut down any hot work activity deemed unsafe and take the appropriate corrective measures to restore and maintain safe conditions.
0-5 years of experience
- Operate 4 MGD Lime Softening Water Treatment Plant regulated NC DEQ, Water Resources Division.
- Plant receives raw water from 19 wells. Operates two ClariCones where lime and polymer is added to water flow. Formed sludge blanket removes coagulated solids.
- Feed fluoride and sulfuric acid (pH adjustment) to flow as it enters surge tank.
- Water filters through five sand filters to remove non-settleable floc.
- Filtered water flows through 250,000 gallon clear well and a 1.0 MG clear well operated in series prior to high service pumps.
- Downstream chlorine gas, polyphosphate and ammonia gas are injected into flow for disinfection and corrosion control.
- Utilize SCADA to monitor, operate and adjust chemical feeds, tanks, high service pumps and operation of wells.
- Collect and analyze samples of raw and finished water for process control every two hours. Analyze for hardness, iron, alkalinity, carbon dioxide, chloride, monochloramines, chlorine, fluoride, polyphosphate, pH, turbidity, temperature. Adjust chemical feeds based on analysis results.
- Record and report data to county laboratory for submittal to NC DEQ, Water Resources Division.
Rate This Article
[Water Plant Operator]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
