- Featured in:
-
More Electro Mechanical Assembler Resumes
Use these Electro Mechanical Assembler samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanical Engineering Resume Samples
Electro Mechanical Assembler Resume Samples
No results found
0-5 years of experience
Worked with max efficiency in a cleanroom environment building classified prototypes
- Used various hand and power tools with precision 80% of the day.
- Alongside engineers helped developed assembly drawing, and noted any errors.
- With high attention to detail assembled countless variations of PVD and CVD chambers.
- Within a month learned to leak check
- Mastered five Ops in nine months when the goal for full time employees is three in one year.
- Became only contractor to work op with final leak check, mega ohm check, power up, water line pressure test, source tilt assist, and bag checks.
6-10 years of experience
Worked from established production and repair based on specifications
- Adjusted or trimmed materials from components to achieve specified electrical or dimensional characteristics.
- Maintained all tools and equipment
- Assembled and welded finished product to achieve production objectives for both quality and quantity
- Understood and used hand tools
10+ years of experience
Performed set up calibration, testing, troubleshooting subassemblies, modules and handlers.
- Recognized failures and setup problems encountered during system testing.
- Formulated corrective action plan
- Operated multimeters, oscilloscopes, wattmeters, current probes, thermometers, and current test equipment
- Ability to read schematics, assembly drawings and detailed blueprints, crimping, harnessing, soldering PCB.
- Performed riveting and drilling
0-5 years of experience
Worked in an assembly line to build the assemblies and sub-assemblies of hybrid electric drive systems according to written instructions and blue prints. Cross-trained in inventory control, and shipping/receiving department.
- Assembled controllers and inverters for hybrid commercial vehicles according to blue prints, drawings, and work instructions.
- Performed in house sub-assemblies such as cables and wire harnesses.
- Assisted engineers to build and test new products and prototypes.
- Received raw inventory, input into computer system, and deliver to proper location.
- Packaged finished products, placed on pallets, and prepared for shipping.
- Used basic hand tools and power tools such as crimpers, strippers, power screwdrivers, and torque wrenches.
- Proficient in MS Word, Outlook, and Excel
0-5 years of experience
Assemble sheet metal electronic components to procedures.
- Riveting sheet metal. Integrating electronic components in to metal chassis. Routing and securing wire harnesses and cable.
- Apply RTV to circuit boards and cable connections.
- Sub-assembly testing as required.
- Assemble light fixtures and wiring.
- Utilize hand power tools. Pack parts to prepare for shipping.
- Read drawing/schematics to ensure proper assembly.
6-10 years of experience
Assemble Water Level Traducer which includes Welding metal housings using both Laser and Tig Welder.
- Also did Cable and Wire Harness assembly using wire striper, and various cable stripping machinery.
- Experience in Weld Engraving using a Weld Engraving Machine which includes Computer Programs and Setup.
- Experience in Testing and Ranging of Units using power supplies and Meters, pressure monitors, multi-meters etc.
6-10 years of experience
Point-to-point, control panel wiring.
- Inspected and test wiring installations, assemblies,
- Soldered boards and wires according to specifications.
- Installed components, cut and crimped wires, and assembled casings
- Labeled products according to specifications.
0-5 years of experience
Assembled custom mechanical assemblies and electric panels using build prints in a clean room.
- Wired electric panels using wire lists and schematics.
- Conducted continuity tests.
- Assembled custom gas boxes using build prints.
- Conducted leak checks.
0-5 years of experience
Assembled and qualified medical transducers for worldwide customers.
- Highly valued medical cell team member.
- Work closely with Production Engineering to resolve any issues.
- Contributed to the company’s IQ suggestion program.
- Followed and reported discrepancies in the assembly / testing documentation.
- Trained fellow team members.
0-5 years of experience
Power up test for the Genome Analyzer. A (DNA sequencing machine.)
- Assemble complex electro mechanical assemblies for scientific instruments.
- Preparation tubing kit. For Hiseq 1000 and Hiseq 2000
- Support Engineers on new product and on creating new procedures.
- Temperature and electrical calibration test.
- Install hardware and load software/ configuration on workstation.
- Support other departments that’s needs repairs on trouble units
- Inspect and test reagent chiller, build sipper reagent tubing, create work instructions in OP50
0-5 years of experience
Wiring switches, E-stops, devices throughout entire vehicle
- Drilling/Taping and adding all duct work and the components, labeling all components to be wired
- Able to read schematics and build vehicle to exact client specification
- Work with and discuss the schematics and layout with project engineer before and during any project
- Built and wired conveyor type vehicle, laying all components out and wiring all components needed to build vehicle
- Responsible for wiring and installing automated guided vehicles and providing maintenance of all vehicles at the production manager’s request
10+ years of experience
Assemble various types of hardware, (CCA’s, Cables, RF Units, and Harnesses) for various Programs.
- Programs include AEGIS, Patriot, Seasparrow, SPS-49 and ROTHR.
- Read and build to drawings
- Participate in proto-type projects and provide input for manufacturability, drawing clarification.
0-5 years of experience
Read and interpret drawings
- Assemble, modify, integrate, prototype any and all electronic systems using various electronic hand tools
- Inspect and test electronic and electrical systems to diagnose malfunctions using visual inspections
- Testing devices and computer software.
0-5 years of experience
Verify all parts and lot number before assembling any products.
- Assemble upgrade kits for machines that are outdated.
- Pick and verify parts for sub-assembly.
- Sub-Assembly involves crimping, bonding, and using hand tools to complete assembly.
- Complete all sub-assembly by reading procedures and work orders.
10+ years of experience
Assembly, bonding, wiring and testing of electrical P.C. Board
- Upload software data
- Calibrate, harness and general assembly of Amplifier Boards
- Coordinate new product development with R&D Engineers
- Soldering and wiring under a microscope
- Wrap and enter data on P.C. boards for quality control
- Appraise blue prints to determine where to connect cables
0-5 years of experience
Competed specifications o burners for boilers
- Assembled above burners for boilers (including electrical wiring)
- Adapt at meeting all required deadlines
- Interface problems with engineers
- Minor machining of parts for custom fit, first articles.
- Supervise and train new employees
10+ years of experience
Responsible for training new assemblers and act as a lead for questions and direction.
- Proficient in assembly of portable scrub sinks, pneumatic dental equipment and pneumatic compressors for The United States Military.
- Operate manual and power hand tools.
- Conduct final testing and quality control of products.
- Interpret and execute development of products from schematic blueprints.
- Assemble of wiring harnesses which include the use of wiring, crimping, stripping, soldering.
- Expertise in drilling riveting and tapping to finish products.
- Skillful in building subassembly and full assembly equipment.
- Excellent in problem solving.
- Competent with use of jigs and fixtures.
0-5 years of experience
Install or assemble cables, PCB assemblies, mechanical assemblies, DC motors, LCD/LED displays
- Follow build file specifications
- Set-up and adjust mechanisms and optics
- Perform final test and QC of products
10+ years of experience
Performs a variety of ion implantation and cleaning/dry strip machinery.
- Wafer operator (input recipes onto computer system and run cycles).
- Build prototype machines from new designs, prints, and schematics.
- Continuously learning new technical information and techniques in formal training sessions in order to stay abreast with rapidly changing semiconductor technology.
- Build, wire and test power distribution boxes.
- Read, correct, and revised assembly drawing, blue prints, diagrams and schematic.
- Works from rough schematics and verbal instruction developments, assemblies, subassemblies and component parts.
- Trained employees on complex assemblies, machines and QA.
- Well experienced with building harnesses and point to point wiring.
0-5 years of experience
- Build and test Indexer Sub-Assemblies high quality standards and meeting all schedules.
- Final assembly and button-up.
- Meet with Master Scheduler and distribute workload to team members.
- Rework and upgrade customer products.
6-10 years of experience
- Assemble ruggedized laptop Computer monitors and LCD’s for the military, air traffic control as well as commercial business enterprise.
- Troubleshooting most products on the production floor and related power issues.
- Flashing and programming PCB boards for upgrade and other computer accessories and testing.
0-5 years of experience
- Work in a clean room
- Build multiple configured robotic controllers using QPC standards
- Format and install software to PC boards through computer interface equipment
- Train technicians on procedures in inspections and quality control
- Trouble shoot, repair, and test controllers
- Work on test fixtures for PC104 boards
- Maintain and update fracas reports and data logs daily using multiple software packages and data entry skills
- Certified in ESD procedures and training
- Communicate with planners and customers about project timelines and goals
Rate This Article
[Electro Mechanical Assembler]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
