- Featured in:
-
More Junior Mechanical Engineer Resumes
Use these Junior Mechanical Engineer samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanical Engineering Resume Samples
Junior Mechanical Engineer Resume Samples
No results found
0-5 years of experience
Designed seismically reinforced frames with vibration isolation systems based on location, operating frequencies, and load points for various HVAC mechanical equipment.
- Provided detailed AutoCAD drawings displaying vibration isolation mounts and structural frames to structural engineers, in-house weld shop, and customers.
- Conducted preliminary seismic calculations for the mounting feet and bolts to ensure equipment was seismically protected within CBC 2003 or IBC 2006 guidelines.
- Provide engineering support to clients and/or structural/civil engineers via tele-conferencing or in-person meetings.
- Promoted from Draftsman to Junior Engineer in 2007.
0-5 years of experience
Exceeded performance expectations for my diligent work designing and developing a mechanical system to calibrate a laser beam at 50 microns accuracy.
- Designed the concept, produced the prototype and conducted thorough testing and validation procedures.
- Established productive relationships with overseas manufacturers to set up assembly lines as well as providing coordination for all processes involving packaging and final production.
- Defined product specifications, wrote test and inspection procedures, failure analysis reports and study summaries.
- Proposed design improvements to improve products and designed solutions to correct problems.
0-5 years of experience
Conducted modeling, simulation and analysis of solar tracking system and thermal insulating mechanism using
Pro/E 5.0 and Ansys 12 softwares.
- Improved product life by 30% through modifying existing design of electric motor using SolidWorks 2013.
- Provided technical support by suggestion and implementation of feasible design solution to clients.
- Created manufacturing drawings of various parts of products with geometric dimensioning and tolerances
0-5 years of experience
- Developed mechanical transportation system, increasing production rate by 30%
- Performed stress and failure analysis of given mechanical parts to verify reliability of designed parts
- Designed mechanical parts for manufacturing department using AutoCAD and SolidWorks
- Participated in Research & Development lab for improving existing Electro-Mechanical products
- Worked as a teaching assistant (TA) for statics class at University of Maryland, Baltimore county
- Learned to work in a fast-paced and high pressure environment at Home Depot
0-5 years of experience
Calculated the load of the central plant’s refrigerant exhaust fans and specified compatible air handling
units and mounting locations within exceptional spacial limitations
- Monitored Airport-wide Natural Gas consumption over the course of a year and half to diagnose potential
- Analyzed the inefficient performance of a domestic hot water heat exchanger and specified its replacement
- Designed OSHA compliant mechanical solutions for dozens of varying deficient fall protection systems
- Compiled technical and contract specifications for fire protection, fall protection and HVAC projects
- Facilitated RFIs, COs and progress payments for several million dollar contracts
0-5 years of experience
- Project managed the facilitation of various construction contracts from the design to close-out phases
- Worked with a team to design fire sprinkler systems using National Fire Protection Association (NFPA) 13
- Utilized Revit software to draft a model sprinkler system design for a parts-storage area in the 255,800 sq. ft. Superbay aircraft hangar
- Evaluated and designed solutions for dozens of varying fall protection systems to meet OSHA standards
- Arranged COs, RFIs, Contract Modifications and certified payroll as a project manager at a 3.6 million dollar budget for the combined total of all varying contracts
- Coordinated and led the summer intern hiring process and selected suited candidates
0-5 years of experience
Commissioning Agent assisting the PE (Engineer) in back-checking and evaluating all mechanical and control systems for several new buildings. This required creating and tracking Issue Logs and conducting Client, Owner, and Engineer meetings.
- Performed 7 Energy Audits for an Oregon school district in which all 7 reports where accepted by the ODOE. Each school was evaluated by collecting field data and applying it to eQUEST energy models.
- Designed plumbing systems for new construction evaluating elevation change, pressure losses, and required GPM flow.
- Assisted in designing boiler burner upgrades for multiple schools in Oregon. Each upgrade required an evaluation of existing conditions and new mechanical drawings for approval by the regional building inspector.
- Functioned as a Draftsman, creating mechanical drawings, plumbing drawings, and floor plans for multiple projects.
0-5 years of experience
Made detailed part/assembly & layouts drawings for Conveyor Wash System using SolidWorks 2005
- Designed / Redesigned tunnel car wash plumbing components, underground electric/hydraulic conveyors and tracks for systems and reclaim tanks
- Created detailed documentation for technical manuals and reproduced detailed drawings from sketches and reverse engineering
- Performed on-site inspections for quality system installation
0-5 years of experience
Hardware/Software design, Prototype Manufacturing, Mechanical Design using Autodesk Inventor
- Provided mechanical design support to the product-development team through hardware/software design using Inventor for design and modeling
- Accompanied the production floor in completing the proper wiring/soddering for a wide range of macro/micro components
- Contributed to the successful redesign/assembly of a widely used FIBER OPTIC cleaning system using Inventor software for design and Autodesk Simulation Mechanical (FEA) for simulation testing
- Provided detailed technical drawings for outsourcing companies specifying detailed dimensions of parts along with tolerances, and materials using Autodesk Inventor
0-5 years of experience
Designed application-specific testing solutions for IC packages, which includes Thermal Control Units
(TCUs), contactors, actuator covers and lids.
- Designed and created manufacturing drawings completed through Solidworks following company
- Used PDM system (Microsoft Navision) for creating BOMs and product management.
- Carried out ECOs and various drawing updates.
0-5 years of experience
Created 3-D models, drawings, and bill of materials for manufactured parts
- Completed a manufacturing drawing package for a circuit board
- Assembled and soldered testing-rig turbines and prototype circuit assemblies
- Performed tests and calibrations on prototype circuit assemblies
0-5 years of experience
Created 3-D models, drawings, and bill of materials for manufactured parts
- Completed a manufacturing drawing package for a circuit board
- Assembled and soldered testing-rig turbines and prototype circuit assemblies
- Performed tests and calibrations on prototype circuit assemblies
0-5 years of experience
- Worked with a small team to design, execute, and document the performance testing of personal protective armor in conjunction with SouthWest Research Institute and SAIC, conducting 72 testing setups over 20+ explosive arena tests
- Acted as a key coordinator of project planning and logistics for a multi-disciplinary group of scientists and engineers
- Contributed data trend analysis and conclusions to two internally published Department of Defense research papers
- Collaborated on multiple power point presentations to Marine Corps System Command and NRL leadership, as well as presenting sections of the material and answering technical questions from audience members
- Introduced new methods of clearly communicating experimental data and conclusions to key stakeholders through detailed graphs, tables, and concise analysis of photos and video footage
0-5 years of experience
Maintained the D353 caterpillar engines on ferries and hydraulic system on the dredging vessel.
- Serviced the Lister Blackstone engine attached to marine vessels.
- Serviced water pumps, injector mechanisms and mechanical components attached to the workshop and vessels in bid of having them efficient and effective.
- Rebuilt engines and installation, supervision of trainee technicians
- Drafted requisitions for various parts, materials and tools, for usage in the workshop and in the fields.
- Supervised the machining of new components on the Lathe/ drilling/ milling machine that would then be installed on vessels, dock yard equipment or even sent over to the warehouse for future usage.
- Used AutoCAD to design spare parts for newly suggested mechanisms for ferries or for usage in the engineering workshop. Transferring these ideas into SolidWorks to assess its effectiveness and efficiency if installed.
0-5 years of experience
Used SolidWorks daily in the design process to create parts, assemblies, drawings, and Simulation studies
- Analyzed scanner bridge to check bolt capacities and was part of a two man team to replace all of the hardware
- In charge of and provided support to two separate surveying teams to survey our detection systems
- Responsible for the mechanical aspects of drift tube design including: end caps, end plates, connections, frames, and supports
- Quickly became the conceptual designer for mockups of all new potential contracts and projects using SolidWorks
- Part of a three man team that designed a frame to support a scanner to inspect the Fukushima Reactor for Toshiba
- Regularly worked with outside vendors to get products and prototypes delivered on time and under budget
- Used SVN for SolidWorks file version control
- Created Bills of Material (BOM) for assemblies and sub-assemblies
- Used SolidWorks to create exploded view drawings and assembly documentation for construction projects
0-5 years of experience
- Reviewed CAD drawings
- Determined estimates for manufactured goods for submission on government bids
- Gathered information on contract requirements
- Submitted proposals and bids for government contracts
0-5 years of experience
- Produced accurate 2D drawings & 3D models of product/production drawings from layouts, sketches, or verbal instructions using Microstation.
- Attended pre-bid meetings and site visits.
- Updated and maintained company engineering standards.
- Assisted in organizing and maintaining project records, such as transmittals and submittals.
- Performed other engineering duties as deemed necessary by supervisor.
- Prepared estimates and material takeoffs for Flue Gas Desulphurization, Air
- Analyzed cost data from quotes and purchase orders making
- Developed sound and accurate estimates through coordination with engineering, procurement, and proposal managers.
0-5 years of experience
- Developed methods to test certain key concepts for prototype infusion sets
- Designed and machined test fixtures for validation testing of infusion sets
- Wrote Test Method Validation and Test Method Protocols upon finishing testing
- Created videos using high speed cameras to record needle injection paths in slow motion
- Worked with porcine skin to simulate infusion set adhesion on human skin for tensile testing
0-5 years of experience
- Brought a new and unique product from an existing 3D model to Beta testing phase within 9 months.
- Conduct hands-on research during multi-phased testing plans to analyze the operation, design, and performance of new products.
- Optimize existing products for cost savings ($200 per unit) and efficiencies in production/assembly.
- Support machine shop, assembly, and service center for the complete life cycle of products.
- Troubleshoot production/assembly issues or problems with older products during service.
- Edit and review technical and marketing documentation.
0-5 years of experience
- Acted as Project Lead for research, selection, purchase, and use of DAQ system and various instruments for the testing of both dynamic and static systems to expand MERC’s testing capabilities.
- Completed model development and rollover analysis for fire trucks to develop safe operating restrictions including real-world data acquisition, post processed collected data, and assisted with computer analysis of results.
- Developed FEM and completed structural, thermal, and modal analysis on the C-5 Jack-pad to determine damage tolerance limits for replace/repair decisions.
- Planned, delegated, and managed both students and subcontractors collecting and developing a database of 60 years of historical aircraft component crack and damage records to be used as the basis for determining service life predictions for sustainment and maintainability of the Air Force’s C-130 Fleet.
0-5 years of experience
- Developed, implemented and supported on-going production processes, methods, tools, equipment, and controls for the manufacture of products and components consistent with obtaining and maintaining design integrity, optimum costs, quality, inventories, and investment in facilities.
- Applied new manufacturing techniques to reorganize layout plan.
- Filed and weigh up the quality control problems.
- Responsible for updating the Auto CAD Drawings.
- Support Quality Systems and Compliance activities for Production line.
- Implemented Kaizen and lean principles and also participated in the Cost improvement programs.
- Ensure from the Quality prospective the transfer of new products from R&D to Production.
- Scheduled, planned and managed each area of pump and motor.
- Worked cross functionally with R & D, Regulatory, Product and Process Development, and Operations to ensure all issues are successfully resolved.
- Assisted the workers with manufacturing section of the pump and assembling the pump parts with motor.
0-5 years of experience
Produce 3D and 2D prints for manufacturing process cards using AutoCAD and Inventor for production of plastic/metal illuminated and non illuminated knobs in Aerospace Division
- Review and Maintain part numbering system, Bill of Materials, Revision Levels, and Engineering Change Notices on detailed drawings
- Perform first piece Approval for incoming and outgoing production.
- Maintain inventory levels and purchase raw materials in United States and overseas as Global Source Coordinator
- Coordinate boat and air shipments for weekly and monthly delivery to the United States
- Perform measurements using caliper, depth gages, and various measuring devices on production samples
0-5 years of experience
- HVAC, Structural and Control Systems.
- Interpret, drawing and designing for many projects.
- Managed a small team to meet deadlines requirements and schedules.
- Collaborated with contractors, architects and other engineers to design
0-5 years of experience
Designed, built, and operated test fixtures to help improve R&D capabilities.
- Assisted electrical engineers with design and wiring of power and control panels.
- Traveled off site to help with measurement and mechanical fit checks for retrofit development.
- High Speed Video Analysis to find and debug NuLabel system issues
- Assisted in the machine shop (mill, lathe, drill press).
0-5 years of experience
IPT team lead for design of rotorcraft Product Manufacturer Alternative (PMA) components.
- IPT team lead in development of standardized design, manufacturing processes, and experimentation.
- Specializing in aircraft under FAR 25, 27, & 29 as well as military applications.
- Standardization of 120 FAA approved repairs and/or modifications to fixed wing and rotorcraft structures and drive train assemblies.
- Specializing in computation and physical component failure and structure analysis.
- Implementation of experimental testing and documentation program for component design reliability verification.
- Extensive knowledge of component manufacturing processes.
- Grinding, high speed machining, various platings, heat treats, shot peening, & precision measurement
- Technical advisor to various production departments.
- Financial forecasting, project scheduling, and future project acquisitions.
- Development of production drawings and assembly instructions.
0-5 years of experience
Contributing to the design and improvement of electromechanical medical devices and manufacturing processes. Trained to good documentation practices in an FDA regulated environment.
- Product Design and Improvement, Manufacturing Assembly Design, Electrical Testing Equipment Design, Manufacturing Process Improvement
- Technical Writing and Documentation: Drawings, SOP, Manufacturing Procedure, BOM, Production Traveler, Item Specification, Change Order
- Vendor Consulting
0-5 years of experience
- Draft/design 3D models and 2D drawings in SolidWorks
- Analyze AutoCAD drawings
- Complete tasks by specific deadlines, obtaining quotes from numerous companies
- Works independently on tasks and consistently email and call manufacturers about products
- Troubleshoot possible design solutions in independent and group settings
- Complete long-term and short-term projects simultaneously by specific deadlines
- Obtain quotes and product information from manufacturers about components to complete design tasks
0-5 years of experience
- Design and implement new test setups.
- Create new product concept through CAD modeling.
- Create and validate all testing methods with documentation and protocols.
- Eliminate human error by programming self run tests for repeatability, ensuring with Gage R&R results.
Rate This Article
[Junior Mechanical Engineer]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
