- Featured in:
-
More Mechanical Engineer Intern Resumes
Use these Mechanical Engineer Intern samples as a guideline or visit our extensive library of customizable resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanical Engineering Resume Samples
Mechanical Engineer Intern Resume Samples
No results found
0-5 years of experience
Solved a long standing problem in the compressed air system, resulting in improved performance and reliability of the pneumatic control systems.
- Designed a pumping system that saved 1-million gallons of partially treated water per year from being wasted.
- Diagnosed electrical and mechanical systems using a variety of equipment including a five-gas analyzer, NVH analyzer, oscilloscopes, and OEM and after-market diagnostic platforms
- Repaired identified issues, including engine management failures and multi-system problems
- Developed diagnostic strategies for situations where no published approaches applied
- Managed other technicians and provided technical support for a full-service automotive repair facility
- Achieved high levels of customer satisfaction, demonstrated by decreases in repair failure rates and seven years of annual sales and profitability increases in my most recent position.
0-5 years of experience
Integrated hydrogen fuel cells into vehicle hybrid prototypes, and verified proper operation of electrical circuits
- Collaborated with electrical engineers in optimizing the location and installation of the wiring system for a three-wheeled electric vehicle
- Analyzed and tested product designs including vehicle electrical components to verify specification compliance
- Received and reviewed customer specifications and needs and incorporated them into design models
- Constructed 3D models utilizing SolidWorks and Pro-E CAD software and produced fiberglass parts and molds
0-5 years of experience
Designed and implemented new packaging solution to optimize efficiencies of production lines
- Reduced production cost including materials and labors, improved overall workflow of production
- Acquired knowledge of different manufacturing processes such as injection molding, vacuum forming
- Collaborated with internal departments and suppliers to provide sourcing solutions to design requirements
- Responsible for testing and verification of functionalities for various electrical appliance products
- Documented and solved bugs, provided testing procedures and reports for each software revisions
0-5 years of experience
Performed walk downs on liquid oxygen and gaseous hydrogen pressure systems on the E-1 facility test stand
- Reviewed ASME B31.3 Piping Process standard to model the redesign of piping systems for the Liquid Oxygen
- Gathered and updated missing liquid hydrogen relief valves and device information into the Stennis Space
- Assisted in tool design to solve technician complications on machine hardware
- Observed test sample transfers of cryogenic materials for verification purposes
- Certified in High Pressure System Safety and Cryogenic Safety at Stennis Space Center
0-5 years of experience
- Developed and assembled 3D CAD models of industrial motors with Creo Parametric (Pro/E). Designed 3D models included frame castings, shafts, bearings (Drive/Non-Drive End), end shields, and fan systems.
- Reviewed engineering drawings and a bill of materials (BOM) to assemble complex industrial motors in Pro/E. CAD assembly’s required full organization of motor components and full design of new components.
- Analyzed and recreated 3D models of motor shafts, brackets, and frames using 2D drawings and specifications.
- Produced 3D models for over 1500 catalog models for both horizontal and vertical motors.
- Assisted information technology on building a 3D model database for consumers to review motor specifications.
0-5 years of experience
- Prepared equipment specification datasheets, equipment schedules, and cost estimates on mechanical equipment.
- Created design layouts on ductwork, mechanical equipment, and piping systems using AutoCAD 2D for new and revamped projects.
- Sized and selected new equipment and optimized existing equipment by understanding the functionality through equipment inspections.
- Calculated heat loads on buildings using CHVAC to determine the optimum airflow needed for the thermal loads.
- Conducted on-site field visits to commercial buildings to monitor and detect any potential problems that might affect the installation or performance of mechanical equipment and piping systems.
- Ensured as-built AutoCAD designs for all projects are accurately recorded in the archives and have them ready for technicians to use.
0-5 years of experience
Worked as mechanical engineer with airend development team and diesel powered portable compressor team.
- Designed and analyzed performance tests of components such as thermostats, rotor bearings, pressure valves etc.
- Performed design analysis on compressor and airend systems such as engine exhaust, air intake, fuel intake, compression, etc.
- Performed FEA analysis of various parts and components associated with airends and compressors.
- Assisted with construction of airend performance estimators.
0-5 years of experience
Project: Study and Process Improvement of Leak Detection in High Voltage Tanks, CT scanners
- Application of design of experiments for critical parameter design and robustness study
- Analyzed design and assembly, performed stress tests, and fatigue evaluation using Ansys
- Executed 32 controlled experiments, developed interaction and main effects plots
- Improved leak detection process, reduced rejection rate, lowered testing time and inspection cost
0-5 years of experience
- Multiple mechanical designs that led to winning bids from customers
- Reviewed overseas designs for mechanical failures though FEA while optimizing for production and cost
- Analyzed fluid designs’ CFM consumption, head loss, compared efficiency curves, response time and lift force for optimization
- Produced and reviewed 2D drawings for vendors
- Constructed engineering procedures and documents such as ECN, ECR, BOM, design packet, 8D and QA
0-5 years of experience
- Studied specifications and conferred with engineering quality, manufacturing and service personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures and life cycle of components.
- Wrote production checklists and diagnostic protocols for new or existing products for review and authorization by designers.
- Solved durability problem by effects analysis through mechanical testing to find failure root causes and researched solutions.
- Designed new manufacturing fixtures using NX 6 CAD design software.
- Performed FEA on under tension components.
0-5 years of experience
ST Grinding lean transformation key member with results of 38% improved UPP/day, 7% labor rate, and grinder equipment cost avoidance of $500K
- Member of three Cell Operating System transformations with multiple contributions such as fixtures/tools design, development and manufacturing (Stems Holder) that helped achieved 14% improvement productivity (decreased downtime) in ST area
- COS experience in service/support areas such as incoming inspection
- Experience in developing and creating multiple visual aids and visual management systems
- Experience with installation of vision systems
- Experience in FDA regulated industry documentation such as (Surgical Technologies & Spinal areas)
- Design parts on CREO Paramentrics, machine shop and Stratasys (3d printer)
0-5 years of experience
Resolved WindChill PDMLink 9.1 issues for the user community
- Optimized engineering processes supported by WindChill PDMLink
- Developed and updated WindChill training material
- Assisted in development of a validation test plan for Supplier Management (SUMA) WindChill add-on
- Participated in validation testing for SUMA add-on
- Large scale data cleansing for Oracle/WindChill integration
- Assisted Engineering Services update and modify CAD models and drawings using Pro/ENGINEER & SolidWorks through company’s Engineering Change Request/Notification processes
0-5 years of experience
Cut production cost of Backup Work Roll Aluminum Locking Rings by more than 50%.
- Redesigned Cold Mill 2 backup roll driver.
- Redesigned Cold Mill 3 Backup Locking Pin.
- Collaborated with general technicians, operators, and outside vendors on ways to improve Roll Shop machine capabilities.
- Updated prints for Cold Mill Backup Locking Ring Blow off Holes.
- Followed plant maintenance activities to avoid plant interruption and achieve the targeted plant availability.
0-5 years of experience
Headed project to reduce the mechanical malfunctions on thirty machines decreasing efficiency
- Created software coding to gather and analyze data to determine root causes of inefficiencies
- Reduced the amount of abnormalities in operation by more than 40%
- Created technical and maintenance documentation to maintain and replicate measures put in place
- Increased efficiency and created a savings of more than $40,000 annually
- Able to communicate effectively with all levels of employment
0-5 years of experience
- Assisted with the design of reliable power conversion products
- Translated 2D AutoCAD drawings to 3D SolidWorks models
- Generated and modified drawings per company standards
- Updated bill of materials and parts descriptions in data management system
- Involved in the development of various custom products
0-5 years of experience
- Mechanical Integrity
- Project Management
- Wrote reports on every completed project
- Designed new equipment to be used for testing
- Worked with technical drawings
Rate This Article
[Mechanical Engineer Intern]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
