- Featured in:
For more information on what it takes to be a Mechanical Project Engineer, check out our complete Mechanical Project Engineer Job Description.
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanical Engineering Resume Samples
Mechanical Project Engineer Resume Samples
No results found
0-5 years of experience
Created the Tire & Wheel handling and Storage System Layout utilizing AutoCAD. Prepared cost estimates, scope of work (SOW), specification & Request for Quote (RFQ). Obtained Maintenance Department cooperation and backing for project activities, including installation assistance. Developed and updated all departmental master project schedules, and CPM charts using MS Project Professional. Oversight of operational equipment controls applications including all PLC logic and control system integration testing and acceptance. Administered all contractor contracts during system design, fabrication, installation and system launch. Developed the Standard Specification Bid Package for the entire Engineering Department.
- Successfully supervised 3 maintenance team members assisting with the system installation & testing, and 8 contractor mechanical and electrical employees.
- Negotiated over $158,000 reduction in vendor equipment and installation labor costs.
- Redesigned plant equipment layout which reduced project cost by $253,000.
- All projects were successfully completed on time and within budget.
0-5 years of experience
Led cross-functional engineering cost reduction team in improving product margins, resulting in 3-5% margin improvements
- Followed through on commitments to produce timely status reports on product design progress. Performed a wide range of tasks: chassis design, current product issues, quality assurance, and engine systems installation. Utilized ProE Wildfire 2 for all 3D modeling.
- Utilized the Six Sigma quality process and product design to reinforce the organization’s vision and quality values, resulting lower warranty cost.
- Wrote test plans for vehicle’s subsystems to verify dozer’s subsystem design and/or FEA analysis.
- Recognized patterns in test/analysis data and drew logical conclusions on vehicle design change during development stage.
- Compiled necessary information to document the design solution required for building the dozer subsystem prototype. Fostered continuous improvement of all operational and business practices.
- Designed and developed all components of the dozer machines utilizing knowledge of Six Sigma Green Belt training and YCA project tools, resulting in reduction of warranty cost and shorter time from concept to the production unit.
10+ years of experience
Responsible for the Texture Analyzer, VTE 250 viscometer, DVE viscometer, DV1 viscometer and RS Rheometer product lines.
- Experience applying analytical and empirical methods to study and solve problems related to linear motion, heat transfer and system dynamics.
- Designed new products, developed continuous improvements to existing products and supported production issues.
- Ensured that all projects are completed accurately, on time, and are clearly documented.
- Provided direct supervision to other technical and non-technical staff as required for successful project completion.
- Prepared detailed validation plans for all projects and orchestrated validation testing to ensure project meets specification.
0-5 years of experience
Medical division develops and markets products to warm or cool patients before, during or after surgery.
- Managed and led a 7-person cross-functional project team responsible for the design and manufacturing of a Class II medical device generating over $1 million in annual sales in a certified ISO 13485, FDA 21 CFR Part 820, and European Medical Device Directive compliant environment.
- Assured products were designed and manufactured to customer and regulatory requirements.
- Ensured proper processes were initiated, maintained DHF’s, and provided ongoing development.
- Supported analysis of customer complaint data to ensure customer complaints were properly addressed via root cause analysis and corrective actions.
- Developed design improvements and assembly changes for X# of existing products.
- Directly responsible for validation testing of new designs incorporated in to medical devices. Assured design changes were consistent in production instructions, BOM’s, and quality documents.
- Generated Good Manufacturing Practices for the wire harness assembly of two products.
- Developed Design Verification and Validation testing procedures for three projects to ASTM standards.
10+ years of experience
Conducted project and design engineering of vacuum heat treating furnaces and peripheral equipment.
- Responsible for multiple projects from concept to installation
- Assisted in the development of 6/10 bar high pressure quenching technology convective heating technology
- Developed MathCAD programs to automatically size pressure vessel autoclave flanges.
- Provided technical and supervisory leadership to draftsmen.
- Resolved conflicts and managed engineering schedules and estimates for completion on assigned projects
- Calculated estimates of engineering labor requirements and shared valuations with the sales team allowing for accurate monitoring of project costs and revenue
0-5 years of experience
Developed, optimized, and implemented seismic and wind bracing for non-structural components to meet or exceed code requirements
- Provided adequate vibration isolation where building specifications required
- Provided MEP seismic layouts and anchorage calculations using AutoCAD, Microsoft Visio and Excel
- Communicated with reps to absolve field installation issues
- Created unique, functional methods to restrain and/or isolate building components while mitigating time and labor
- Proactively managed, supported and facilitated internal and external workflow to project completion and customer satisfaction
- Recommended product line to meet customer needs
- Engineering lead and trainer on multimillion dollar commercial construction house account
0-5 years of experience
Served as a team leader in the oversight of project development, procurement of materials, design and construction involving electrical systems, pneumatic conveying systems and coal gasification.
- Managed large strategic capital projects simultaneously based on customer requirements and process design requirements.
- Implemented processes to enhance schedule performance, lower cost, and improve quality, through Lean and other Industrial Engineering concepts for construction purposes.
- Participated in Pre-Construction and Pre-Bid conferences to review contract requirements and project scope as well as resolving field concerns.
- Monitored and informed project construction and design concerns to management which included quality and safety concerns for efficient project execution.
- Created drawing layout within AutoCAD including elevation, structural and plan views and piping and instrumentation diagrams (P&ID) for construction.
- Developed AFE’s, cost estimates, construction reports including contractor quality control forms and transmittal correspondence and reviewed contractor design submittals.
- Worked with control systems, electrical and fluid systems and components such as compressors, manifold valves, PLC and sheet metal and materials including fly ash, coke, gas, oil and water.
- Prepared instruction/operating manuals and specifications, based on equipment specifications, job site validation documents and installation procedures thus providing customized training to the end users as needed.
0-5 years of experience
Specialized in installation of air-conditioning units, plumbing, heating systems, water treatment equipment
- Managed and supervised 10+ technical and maintenance staff during project implementation
- Project Manager of site installation activities including air-conditioning systems, heating system, plumbing and water treatment equipment
- Installed underfloor heating and cooling system using PEX piping in residential luxury villa
0-5 years of experience
System Integration Engineer. Developed, designed and worked directly with manufacturing and testing on new thermal systems using Watlow’s heaters and sensors.
- Designed systems with ceramic, tubular, star wound, and silicon rubber heaters. Most systems included a heater, insulation and controls built into insulated stainless steel housing.
- New Product Development. Instrumental in starting a Heater Vulcanizing production line. This line included prepping, priming, vulcanizing, soldering, capping, welding, molding, final assembly and testing stations.
- Created all layout drawings and designs using MicroStation.
0-5 years of experience
Designed, specified and oversaw construction of HVAC, fire protection, and plumbing systems for commercial and light commercial projects.
- Designed the mechanical systems for a multipurpose building which required coordination between professional disciplines. Prepared the HVAC and plumbing engineering drawings and specifications and presented design options to owner.
- Designed, built, and coordinated mechanical, electrical and plumbing for the HVAC and plumbing systems for a building with multiple spaces such as locker rooms, kitchen, pool, dining room, bar, mechanical room, and offices.
- Designed the hospital piping replacement which required coordinating the design efforts with hospital operations while performing as built drawings and scheduling construction efforts.
- Reviewed energy conservation projects throughout the state as a third party auditor for Northwest energy. Projects included solar systems, irrigation pump and motor replacements, and in-home energy conservation measures.
0-5 years of experience
- Led projects from design to manufacturing and ECO release.
- Met cost reduction plans and tight schedules for major projects exceeding customer expectations. Saved $35K on a $200K system through value engineering and choice of components.
- Designed chemical delivery, cooling systems, high purity gas systems and exhaust systems.
- Supported production activities and improved assembly time using Demand Flow Technology (JIT).
- Established many Engineering standards & practices and ISO regulatory procedures.
6-10 years of experience
Designer for HCM (Hard Capsule Machine), CFM (Capsule Filling Machine), Licaps (Liquid Filled Capsules).
- Co-designer of new CFM for global sales projects promoting capsule sales
- Developed tooling for Capsule in a Capsule project for large customer promotion.
- Designed tooling and change parts to support AAA DB Capsules production.
- Designed aluminum parallel deck frame and rear elevator system for new HCM.
0-5 years of experience
For a global leader in technology and solutions, working in the R&D department, developing new solutions to current problems in steel mills worldwide. Part of a cross-functional team, to enhance the current technologies. Designs quick fix solutions for customers as needed.
- Traveled to different mills around the workd for testing of new parts that are currently in development.
- Use Solidworks on a daily basis, to create/modify parts and drawings to design a better solution to what the customers currently have.
- Wrote detailed reports for the company or to the customer on the new products that are being developed and tested in the field.
- Rewrote detailed Excel programs into MATLAB.
0-5 years of experience
Manage corporate capital projects for multiple plants to assist operations and maintenance personnel with daily job responsibilities. Assist fellow employees with mechanical assistance for their project needs and desires. Act as Project Leader for the installation of four new threading machines.
- Create project specifications for bid purposes for project implementation
- Liaise with contract and plant personnel project construction
- Manage contractors during construction and project installations
- Interface closely with the design engineering group for drawing package completion
- Create preliminary schedules to enable successful project deadlines and coordination
- Participate in vendor selection process, including proposal review
- Schedule project installations and follow closely to meet or exceed target installation time
0-5 years of experience
Lead for 2M dollar casting line renovation capital project
- Drafted detailed construction and fabrication prints
- Developed Gantt charts for construction using MS project
- Successfully converted 300 foot casting production line over weekend shutdown
0-5 years of experience
- Led a five-member team developing communication of information for a highly technical product offering. Redesigned the information development into product design cycle, reducing product launch time by 20%.
- Coordinated the outside sales efforts of 5 salespeople and supervised 5 distribution and technical support representatives. The team demonstrated the largest regional sales growth with an 18% rise in sales in 1994.
- Developed the technical information for a successful sales approach for a product launch in the Japanese market. The strategy cut the need for technical support by our Tokyo office in half.
- Redesigned the assembly for a home mastering system, addressing all engineering, manufacturing, and operational issues. Other projects included system analysis for cost reduction and product obsolescence.
0-5 years of experience
Design new pressure and temperature switches and sensors based on customer requirements
- Work with senior engineers and manufacturing, quality, and sales representatives as well as customers to execute the development of new products that support customer needs
- Create project schedules and establish milestones to work towards meeting
- Write detailed test procedures to qualify new designs using customer and industry specifications
- Organize and analyze test data and produce detailed test reports
- Resolve issues with production and manufacturing to maintain program schedules
0-5 years of experience
Explore, collect and develop concepts into prototype for new and existing products.
- Lead engineer responsible for engineering design, product development and managing multiple projects.
- Utilize Pro Engineer 5.0 for designing and analyzing components, assemblies and mechanisms.
- Work closely with engineering, marketing, program managers, industrial design and outside suppliers.
- Lead technical design reviews and testing verifications. Develop test systems and functions.
- Review and approve documentation for engineering changes, product specifications, procedures and failures.
- Analyze plastic materials and electrical components to develop a plan to reduce project costs.
0-5 years of experience
Managed small and large capital projects throughout the facility from tissue manufacturing to converting processes. Created and managed project budgets and all of the appropriation documentation.
- Used Microsoft Project extensively to develop and maintain project schedules.
- Project manager for design and installation of steam application equipment. Results included a higher than anticipated reduction of natural gas usage in the drying section of the tissue manufacturing machine as well as a more uniform sheet quality.
- Led local mechanical efforts on multimillion dollar, multi-line installation of equipment. Project included upgrading major equipment components to allow for higher speeds and increased efficiency. Coordinated with out of state staff engineers and ensured on time and on budget start up of 1.5 year project.
6-10 years of experience
Responsible for development of engineering scope, project requirements and project proposals. Activities included coordination and preparation of engineering drawings and design for process and facilities.
- Coordinated design fabrication and start-up of process line for Corning Fallbrook Lead abatement project which included the renovation of the facility and process; reduced operator exposure to air borne concentrations of lead.
- Performed energy assessment and modeling simulation for a Copeland facility. The process energy evaluation diagnosed problems related to design. Energy simulation contributed to completion of project on time and within budget.
- Supervised the mechanical renovation of building systems to control contractor scope change orders on the BFGoodrich Louisville, CPVC Expansion. Directed the scope review and education of the contractors relating to the specific design requirements and maintain piping package budget.
6-10 years of experience
- Produced custom commercial compressor stations for several industries including beverage, printing, telecommunication, and power generation and transmission.
- Responsible for all aspects of a project including customer consultation, initial design, 3-D modeling, prototyping, testing, component and vendor selection, generation of manufacturing drawings, bills of materials, and documentation, pilot production runs, and production support.
- Interact with customers and vendors at trade shows, site visits, and technical support.
- Coordinated with production departments to ensure designs are manufacturable and cost-effective.
- Worked with interns on building prototypes and test fixtures.
- Helped marketing with translation of advertising materials from German to English.
0-5 years of experience
- Performed a lead project engineering role for naval nuclear equipment procurements which required managing the equipment from the design phase to delivery including budget estimates, specification creation, vendor oversight including site visits, and troubleshooting design issues discovered during manufacturing to ensure deliverables meet project schedule deadlines and cost estimates.
- Project Manager of a team of over 20 engineers and buyers for a project management software tool being designed and tested for implementation to 500 engineers and buyers utilizing the Microsoft SharePoint EPM platform.
- Successfully implemented the adaptation of Microsoft Project into the project management software tool so that vendors, engineers, and management were able to better manage the key performance indicators and milestones as part of a shared workspace.
- Developed in house surveys across three organizations of engineers, buyers, and managers to filter out the real-world needs and preferences of the new project management software tool to effectively improve the quality and timeliness of managing equipment designs and procurements.
- Conducted training sessions to engineers, buyers, and managers to ensure collective buy-in to the new project management pilot software tool so that real time projects could successfully be managed.
- Executed lead role on resource management team which analyzed and budgeted resource allocations for near-term and out-year manpower projections based on the Naval Nuclear Propulsion Program Seven Year Microsoft Project plan.
- Supported new equipment designs by writing technical specification requirements for vendor use in conjunction with engineering design agency reports.
- Assisted with special urgent testing procurements at an Idaho test facility to support analysis of improved leak testing requirements and on-site procedures.
0-5 years of experience
Mechanical project engineer tasked with design and on-site supervision, installation and start-up of lead oxide production, process and conveying systems used in the United States and internationally
- Experienced in designing large scale industrial process flow systems including the creation of complete system layouts, P&ID diagrams, assembly instructions and operations manuals
- Designed production systems incorporating industrial ovens and furnaces, vibratory feeders, rotary valves, screw conveyors, bucket elevators, conveyor belted systems, dilute phase pneumatic and vacuum conveying systems, cyclone separators, fill-pass valves, diverter valves, control gates, load cells, material samplers, vibrators, bindicators, baghouses, binvents and storage silos
- Functioned as the lead representative of my company in on-site collaboration with customer engineers, managers, production personnel and local contractors in support of fabrication, assembly, training and operation of large capital equipment systems
- Developed prototype continuous paste mixing system and work platform as well as all the support systems utilizing Schenck Accurate gravimetric feeders and dilute phase pneumatic conveying
- Working knowledge of PLCs and other industrial controllers used in a production environment as well as operational experience using Allen Bradley systems and Honeywell systems
- Redesigned and directed on-site fabrication by local contractors of various equipment including industrial furnaces, storage silos, cyclone separators, screw conveyors, and vibratory feed systems
- Wrote new manuals for training, operations, safety, etc and updated all existing documentation
0-5 years of experience
Lead mechanical engineer responsible for the packaging of power electronics components (DC-DC Converter, Voltage Protection Module, Inductor, Energy Storage Systems), including but not limited to conceptual design, CAD modeling & simulation, product DFMEA and feasibility study, drawing creation and release to manufacturing
- Manage multidisciplinary team of mechanical, electrical and software engineers to meet project goals and deadlines for power electronic components (DC-DC Converter, Voltage Protection Module, Inductor, Energy Storage Systems) for use in heavy duty applications
- Track and schedule engineering deliverables summarized to management through written reports and presentations
- Conduct design & stage gate reviews for various sub-component level designs for heavy duty hybrid power trains
- Liaison between engineering, program management and prototype/manufacturing during alpha, beta and production builds
- Generate test procedures and requirements to ensure compliance to design specifications including SAE, IEC, DIN, and IPC
- Create program deliverables such as System Design Specifications, Performance Specifications, mechanical and electrical customer interface documents, service manuals and manufacturing work instructions
- Ensure correct BOM & documentation capture and release through extensive review of CAD generated models and drawings
- Developed and manage New Product Introduction Process utilizing a stage gate system to significantly improve reliability of product and reduce post production costs
0-5 years of experience
Designed and assembled Power Fluidic systems for testing
- Completed mechanical fabrication inspections
- Checked mechanical drawings
- Reviewed structural analysis and calculations
- Communicated with vendors to acquire quotations, write purchase orders and complete receipt inspections
0-5 years of experience
Managed multiple projects (ranging from $20,000 to $2.5 million in revenue) providing safety-related components to nuclear power plants for periodic maintenance and upgrades.
- Developed technical documentation in compliance with ASME Section III applicable Editions and Addenda (from 1974 up to 2013) such as: production travelers, hydrostatic/pneumatic test procedures, procurement specifications, design specifications for small components, design drawings, design reports, code reconciliation, certified material test reports (CMTR), code data reports, and history dockets.
- Reviewed client purchase orders, client specifications, industrial specifications, and manufacturer’s data sheets to prepare commercial grade dedication plans.
- Reviewed test data and provide technical resolution for Discrepancy Reports (DR) or Non-Conformance Reports (NCR).
- Coordinated purchasing, manufacturing, documentation, quality assurance, and testing activities.
0-5 years of experience
Create mechanical 2-D fabrication and assembly drawings in AutoCAD 2015.
- Oversee the assembly process of multiple substations.
- Reading and interpreting blueprints, sketches, or product specifications to determine sequence and methods of fabricating, assembling, and installing sheet metal products.
- Identify engineering problems and ensure solutions are implemented.
0-5 years of experience
Performed FEA stress analysis on diesel engine power transfer components such as Gear Housings, Flywheel housings (major castings) using ANSYS FEA for various Industrial pick-up truck, marine and agricultural applications.
- Adopted Analysis Led Design approach for making design modifications using solid modeling techniques in ProE. Completed assigned project goals and satisfy customer needs as per internal Cummins standards and implementation procedures.
- Interacted with overseas cross functional design and project teams to identify and solve current product on-field issues. Provided timely project updates by conducting meetings.
- Designed and prepared fixtures using ProE required to conduct static and fatigue tests for validation in conjunction with the machining dept. Planned and coordinated experimental tests with lab technicians to collect basic strain, temperature and vibration measurements.
- Performed reverse engineering on flywheel housings to experimentally determine safe fatigue loads on flywheel housings.
- Analyzed and post processed experimental data using Diadem, Minitab MS Office tools and documented results.
- Validated engine valve train and power transfer components such as push rods, valve springs, flywheel and transmission housings for Dynamic Fatigue Margins, dwell condition limits, material Low Cycle fatigue limits and bolted joint design as per Cummins standards to be a part of Design Validation Planning and Report issue solving.
- Coordinated non destructive failure analysis tests Magnaglo, Zyglo with Metallurgy department to inspect and analyze for crack initiation and propagation in major casting components.
- Used concepts in Statistical Process Sampling to reduce machining cost on surface roughness of fuel system injector clamps. Post processed data to identify and eliminate special causes and decrease process variability by plotting X bar and R charts in Minitab.
- Presented project results in design reviews in a power point presentation format to promote projects in production phases. Documented results in a technical report format to as a part of company literature.
0-5 years of experience
- Demonstrated analytical skills in calculating & plotting control charts based on defects and dimension variations.
- Synchronized tasks within the group for timely completion of project.
- Created process standards such as: Design Criteria checklists, Design calculation standards, Design Review material; maintain and present these documents as necessary.
- Reviewed projects for compliance with engineering principles, company standards, and customer requirements, including opinions and interpretations.
- Coordinated activities concerned with technical development, scheduling, and resolving engineering test issues.
- Implemented Kaizen activities in mfg. & assembly line for reducing cost and increasing productivity.
- Focused on effective work place organization and standardized work procedures (5S).
- Exercised Mistake Proofing in the assembly process by focusing on defect prevention rather than defect detection by proper development and maintenance of work instructions.
- Documented and presented assembly line problems (missed operations, defects, downtime, daily throughput charts) in the production meetings in the form of PARETO Charts.
0-5 years of experience
Designed systems to solve fluid flow problems with starch and dye system
capital projects.
- Coordinated with department management and vendors to implement
- Managed tradespeople in implementing system changes and inspections.
- Made necessary changes to system specification drawings.
0-5 years of experience
Manage and coordinate custom industrial refrigeration and gas compression projects for industry
leading petrochemical clients from inquiry to final product shipment for projects up to $1.5 million.
- Milestone and final project signoff to ensure product quality and accountability
- Analyze customer specifications to ensure project special requirements are met
- Perform engineering design calculations and select appropriate components
- Generate cost estimates and preliminary AutoCAD drawings for customer inquiries
- Collaborate with designers and engineers to create system drawings, layouts, and bills of material
- Refine drawings and manufacturing/inspection procedures through customer approval cycles
- Meet with customers in person or on call to resolve any outstanding engineering concerns
- Support fabrication shop and troubleshoot manufacturing issues
- Execute projects according to engineering standards and codes such as ISO 9001, ASME,
0-5 years of experience
- Part of team that supervised the mechanical trades, ie piping, plumbing, & equipment
- Designed project management progress and tracking systems
- Fast track project completed 90% of building (including equipment) in 7 months
0-5 years of experience
Developed products targeted at the public safety vehicle market.
- Interfaced with installers to develop custom mounting applications
- Worked with cross functional teams to develop quality and production plans for new products.
- Expanded existing product lines through product line extension programs.
0-5 years of experience
Responsible for mechanical design of remote meter reading systems
- Designed waterproof electronics enclosures and handheld meter reading units
- Utilized Pro/Engineer to design new products
- Designed injection molded plastic parts
- Performed lab testing of new meters
0-5 years of experience
Responsible for prediction and evaluation of performance of generator (engine and altenator) components under operating loads using FEA/CAE tools
- Serve as a technical support for internal and external customers
- Assist genset engineering team in creating cost efficient designs using optimization tools in FEA
- Perform static, durability and manufacturing FEA at component, system and sub-system level
- Collaborate with CAE teams within [company name] to develop new techniques for faster pre-processing and reduced down times
- Prepare technical CAE reports for internal and external customers
- Create CAE reports for third party consulting firms to certify products for International Building Codes (IBC)
- Perform material testing and constitutive modeling of nonlinear materials
- Mentor and assist colleagues at India Design Center, Pune in FEA
- Create 3D CAD models and drawings of analyzed and approved designs in Creo v2.0
6-10 years of experience
Involved in all stages of new product development from conceptual product design, prototyping & component selection, testing & validation, to manufacturing training.
- Department liaison for coordinating new projects and communicating design changes to management, engineering, manufacturing, purchasing, quality and other personnel as required to meet budget constraints and schedule deadlines.
- Provide technical support to all departments: design efforts with other engineers, component specification & verification for new products, cost savings for purchasing department and technical support to sales & marketing.
- Involved in the engineering end of the AS/400 database system including new part entry, updates to existing parts, Bill of Material & automating work order generation for manufacturing.
- Responsible for product hazardous area approvals (FM, CSA, UL & ATEX) including new approvals, updates and documentation maintenance.
- Research and testing of general components and material research for magnetostrictive sensors and pickup devices.
- In-charge of packaging of new electronic sensors & controls.
- Responsible for ingress protection (IP rating) testing, shock & vibration testing to ensure new products meet and/or exceed required specifications.
- Responsible for major reduction in sealing issues with existing products.
- General project management, coordination of all project activities, customer & vendor interaction and delegation to drafting level personnel.
- Detailing involving tolerance verification, documentation and Bill of Material verification.
6-10 years of experience
Handle 95% of all repair work for customers
- Responsible for design and bill of materials for all standard shop projects
- Responsible for issuing drawings and job tickets for shop floor use which include disposition/description of work procedure to be completed
- Quality inspection of final products
0-5 years of experience
Executed site modifications and construction projects
- Responsible for integrity activities
- Reviewed and revised inspection schemes, including process vessels, process piping, storage tanks, transmission pipeline
- Manage chemical injection for corrosion inhibition.
- Managed in-house construction team
0-5 years of experience
- Lead mechanical project engineer responsible for Honeywell advanced material manufacturing facility
- Manage engineers, designers, and construction supervisors to successfully execute Six Sigma projects
- Prioritize, manage, and support 15+ concurrent capital projects for plant maintenance and operations
- Drive DCS/PLC integration effort into web-based applications for plant improvement initiatives
10+ years of experience
Design and detail special products, equipment, and machines using Inventor, AutoCAD, SolidWorks, and Solid Edge for the Chemical, Plastics, Automotive, and Military Industries
- Assist in the exploration, development, planning, and launching of new business opportunities
- Finite Element Analysis – Assembly and parts analysis for stress, factor of safety, deformation, displacement, heat transfer, etc.
- IT Management responsibilities including specifying workstation hardware, configuring servers, testing and quality control of software, and setting up network infrastructure
- Familiar with the following software: Solid Edge, SolidWorks, COSMOSWorks, Nastran/Femap, AutoCAD, HTML Editing, Microsoft Office Applications, PC Security software
- Ability to work cooperatively with colleagues and teams.
0-5 years of experience
Designed electro-mechanical coffee brewer systems from concept to final product release.
- Lead Mechanical Project Engineer on multiple high volume coffee brewer system designs from concept feasibility, industrial design, electro-mechanical design integration, prototyping and tooling from pilot manufacturing through to full production.
- Consulting with Keurig senior management team on various ideas and strategy reports on proposed new Keurig products.
- Extensive traveling to our contract manufacturer in China
0-5 years of experience
- Work with a team of engineers on the design/modification of natural gas compressor and meter stations.
- Develop detailed plot plans, area plans, section and details of all systems within a natural gas compressor station using AutoCAD and Microstation.
- Specify and approve the procurement of pipe, valves, and equipment from multiple vendors.
- Provide both remote and face to face construction support to customers and contractors.
6-10 years of experience
- Assisted the other disciplines’ Project Engineers and the Project Manager with understanding and developing interdisciplinary solutions for critical technical issues and client needs; conveyed outcomes to the overall engineering team; monitored successful implementation
- In charge of and responsible for a mechanical team completing all mechanical design phases for specific projects, including work plan development, man power analysis, schedule development and compliance, and quality control
- Supervised overall design efforts, systems analysis, and equipment sizing and selection; prepared technical papers and documents for client review; monitored team members’ performance and mentored for growth within the mechanical group
0-5 years of experience
- Develops statements of work , specifications, and cost estimates for facility projects
- Functions as project manager for Air Force projects and reviews design submittals for 35%, 65%, 95%, 100% and final designs from A&E firms for Air Force facilities
- Develops design scope, schedules, budgets, phasing, construction costs, and resolves site and design review issues
- Manages all phases of Air Force projects from scope development to final approval/installation for the Civil Engineering organization
- Submits approved design documents to base contracting prior to advertising for bid
- Evaluates equipment submittals for project designs prior to contractor installation
- Negotiates project change orders and provides technical guidance to provide best product outcomes to meet customer goals for facilities
- Provides progress reports to the Base Civil Engineer on designs and projects
- Uses computer skills with Microsoft Office-Word, Excel and PowerPoint to meet project goals
- Uses project management experience, skills, and training to keep projects on time
6-10 years of experience
- Prepares the feasibility studies of new equipment installation and various improvements, modifications, changes in existing installation and equipment layout/arrangement.
- Prepares bill of materials, purchase requisition, manpower requirements and cost estimates using Office 2000 Microsoft Excel. Prepares Job Authority Request for management approval.
- Conducts inspection of on-going equipment fabrication and installation works, refractory works, requisitioned materials or equipment.
- Prepares the PERT/CPM of projects for implementation to monitor and control progress of work using MS Project software.
- Handles planning and scheduling of activities for the on-going project including the daily inspection of erection works if in conformity with design specifications.
- Prepares technical reports, memoranda, and progress & accomplishment reports.
- Supervises the test-run and commissioning of the process equipment involving mechanical, electrical, and instrumentation system.
- Conducts final inspection and certifies completion of project.
0-5 years of experience
Assemble project submittals
- Assemble operation and maintenance manuals
- Assist in all contract requirements
- Order, release, and expedite all projects material and equipment
- Manage and maintain project documentation, logs, and records
- Maintain purchase and delivery schedule
- Create and track change orders
0-5 years of experience
- Design of mechanical and plastic parts on satellite dishes and planar antennas
- Installation of microwave emitting chamber
- Perform all stress/ strain analysis on products
- Familiar with variety of design materials (aluminum, steel, tubing, plastics)
0-5 years of experience
- New product design and evaluation – Electric Vehicles
- Solid fuel internal combustion engine development/evaluation.
- Suspension and driveline troubleshooting investigations.
- Demonstration fleet build monitoring & maintenance.