- Featured in:
-
More Aircraft Mechanic Resumes
Use these Aircraft Mechanic samples as a guideline or visit our extensive library of customizable best resume templates.
Select
Customize
Download
Looking for cover letter ideas? See our sample Aircraft Mechanic Cover Letter.
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanics Resume Samples
Aircraft Mechanic Resume Samples
No results found
0-5 years of experience
Played a major role in the start up and operation of the Texan II T-6 aircraft training program at Moody AFB.
- Trained new mechanic in the airframe and engine systems of the Texan II T-6 aircraft.
- Improved procedures for the rigging of the landing gear on the T-6 aircraft, resulting in an improvement in Air Force maintenance manual which improved the safety of aircraft.
- Performed engine runs on aircraft to insure aircraft operational safety.
- Expedited inspections on aircraft gaining an improvement of 25% on aircraft roll out time.
- Inspected the GE110 engine for 6000 hour inspection build-up for the Air Force at Cannon AFB.
0-5 years of experience
Aircraft mechanic
- Inspected $41.8 B of aircraft and sensitive equipment associated with the aircraft and support equipment
- Performed various maintenance tasks to ensure full mission capability
- Assisted in the inspection, repair, and restoration of over $2 M of aircraft
- Ensured 100% of aircraft met their scheduled flight times due to maintenance actions
- Boosted cleanliness, upkeep and smooth operation of heavy maintenance facility by %10
- Helped save $10K and potential for injuried personel by removing and replacing tool room storage
6-10 years of experience
Conduct routine maintenance on the F/A-18D in accordance with Navair and FAA rules and regulations.
- Remove and replace engine components, service hydraulic, pneumatic, and other related systems.
- Trained and supervised 5 Marines
- Resolved conflicts and achieved significant improvements in the Marines’ performances.
- Served as Barracks Duty NCO, reporting any unusual activities and behavior that is unbecoming of a United States Marine.
- Yearly firearm and marital arts training.
0-5 years of experience
Inspected, troubleshot, repaired, serviced, modified, and tested complete aircraft systems, as well as components on heavy aircraft
- Coordinated with other agencies to monitor maintenance performed on assigned aircraft in order to ensure timely completion of scheduled inspections
- Removed and replaced aircraft system components such as aircraft flight control surfaces, engines, access panels, doors, hatches, landing gear assemblies, hydraulic tubing, electrical wiring and control cables
- Documented maintenance efforts performed on aircraft and components on official documents and forms (AF Form 781 series)
- Planned and organized maintenance activities as lead technician, working closely with mechanics providing administrative and technical guidance to meet inspection deadlines, while adhering to safety procedures
- Performed aircraft inspections, including basic post-flight, thru-flight, Isochronal, and pre-flight inspections
- Used powered/non powered aerospace ground equipment to support aircraft operations
0-5 years of experience
Provided instruction and supervised as many as 12 mechanics, as a Day Shift Supervisor, while conducting/monitoring a day to day flight schedule.
- Provided leadership, mentored, provided on the job training for professional growth and promotion.
- Efficiently and safely maintained and troubleshoot F404-GE-400/402 engines and FA-18 A/B/C/D aircraft.
- Proven ability to communicate effectively in diverse and stressful situations while deployed during combat operations during Enduring Freedom
0-5 years of experience
Troubleshot many different systems of corporate aircraft ranging from light to heavy jets.
- Maintained, repaired and serviced many components of aircraft and engines
- Regularly perform calendar/hourly inspections, scheduled and unscheduled maintenance checks, low utilization and post and pre-flight checklists.
- Perform general aircraft operations including: Lifting, jacking, towing, taxiing, weighing.
- Wrote and recorded Log book entries at the time completion of work was accomplished.
6-10 years of experience
Phase Dock Inspector Performed and supervised 1000 hour inspections keeping an 100% pass rate for two years
- Assigned as an assistant engine manager for the largest F-15 fighter squadron the 333rd 4th wing taken care of over 40 aircraft.
- One of only a few F-15E Senior Airmen to hold a maintenance 7 level
- Performed the duties as a Squadron Maintenance Trainer
- Operated Test equipment for engine trouble shooting and monitoring
- Utilized all aircraft technical manuals and related documents to successfully maintain aircraft.
0-5 years of experience
Completed UH-60 modifications and upgrades such as: Air Warrior, HVMS, FLIR, SAT-COM, Blue Force Tracking.
- Performed tests on CH-47 SAT-COM.
- Maintained, modified and repaired aircraft structures utilizing maintenance manuals, blue prints and engineering drawings.
- Responsible for assembly and structural fabrication of CH-47F simulators.
- Experienced with a wide range of aircraft metals and composites.
- Laid-out patterns and measurements using scales, calipers, machinist squares.
- Maintained and worked with pneumatic drills, sanders, rivet guns, standard sheet metal tools and general mechanical tools on a daily basis.
10+ years of experience
Repair and overhaul components included in the nacelle systems, to include inlets fan cowl, thrust reversers, and other components included in that system
- Prepare and fabricate damaged airframe sheet metal and composite components
- Inspect incoming parts for damage and create job packages
- Perform in process inspections of various engineered repairs
- Repaired, overhauled, or replaced components to applicable service manuals, as well as blueprints and other technical data.
- Report and confer with Team leaders and Management on serious problems that could impact job completion dates.
- Performed inspections and created discrepancy reports as in house “Class A” inspector for 10 years with Goodrich
0-5 years of experience
Inspected and maintained Learjets 40,45, 60 and Challenger 300
- Performed duties such as de-fueling, aircraft fueling and towing
- Consulted manufacturers’ manuals to determine feasibility of repair according to malfunction
- Inspected, serviced, and repaired pneumatic and hydraulic systems
0-5 years of experience
Provided Aviation support as an S61 Mechanic by providing aircraft support for the Department of States Bureau for International Narcotics and Law Enforcement Program. Performed and maintained daily inspections and phase maintenance on CH46 helicopters. Performed miscellaneous duties to service aircraft including; hydraulic system servicing, engine oil replenishment, aircraft systems lubrication and aircraft fueling. Inspected engines and their associated components for airworthiness, repaired and replaced defective engine parts, interpreted manuals and other related documentation to determine feasibility and method of altering or repairing the aircraft.
- Certification of Completion – GE-CT58 Engine Trouble Shooting and Line Maintenance
- Certification of Completion – S-61 Series Rotorcraft Maintenance Familiarization Course
- Certification of Completion – Tactical Survivability Course – Security Solutions Gryphon Group.
- Completed Familiarization course on CH-46 Helicopters.
- Met the current US Army Standards of Weapons training of M-4 Assault rifle.
0-5 years of experience
Received recognition for the ability to complete a complicated task within the time frame required to complete the repair.
- Repaired and replaced aircraft structural components to include stringers, longerons, bulkheads, beams and aircraft skin according to drawings, blueprints, directives, technical manuals and safety procedures.
- Fabrication of structural parts, forming blocks, and shaping of metal using techniques such as stretching, shrinking, and other metal forming techniques.
- Contributed in saving the army time and resources developing an alternative longtime repair for constantly recurring damage.
- Use common measuring tools, precision measuring gauges, and alignment fixtures to perform structural repairs.
- Uses and performs proper maintenance on common and precision tools.
- Prepares forms and records relat6ed to aircraft maintenance.
6-10 years of experience
Responded to North Korean nuclear test by prepping and launching dual Reconnaissance missions back to back. Amassed 13 hours of intelligence and 600 images allowing the Secretary of Defense to review North Korean progression.
- Preformed a wide variety of maintenance to include Hydraulic component replacement, flight control cable adjustment, as well as landing gear switch rigging and adjustment.
- Preformed over 100 in-depth periodic inspections correcting over 150 delayed discrepancies and previously unknown discrepancies.
- Found and corrected improperly routed hydraulic quick disconnects, preventing aircraft damage, saving $661K.
- Troubleshot wing flap discrepancy, isolating problem to a sensor and adjusted switch avoiding future in-flight departure mishap.
- Completed 76% of maintenance actions 1-3 hours before time allotted for task to be complete.
- Test and inspection of hydraulic systems such as; wing flap operational check, speed brakes operational check, landing gear operational check, as well as electrical sensors and switches linked to the hydraulic components.
- Lead team of 3 coworkers in launch and recovery procedures, as well as completing countless inspections in a time effective manner.
0-5 years of experience
Repair and overhaul of turbine environmental control systems for military and commercial
aircraft such as: C-17, C-130, V-22, F-22, F-18, F-16, P-3, A-340, F-15, U-2 and E2C.
- Responsible for assuring final quality acceptance of mechanical systems.
- Good working knowledge of SAP system.
- Participated in multiple Kaizen (continuous improvement) events.
- Assisted Manufacturing Engineer on Six Sigma troubleshoot projects
- Actively involved in 5S Sort / Store events throughout the shop.
0-5 years of experience
Provide 12/7 coverage on the United States Army’s Blackhawk helicopter in support of Operation Enduring Freedom. Perform scheduled and unscheduled maintenance. Tear-down, inspect, repair and replace aircraft components, engines, auxiliary power units, main rotor blades, dampers, spindles, tail rotor components, gear boxes, swash plates, transmissions, drive shafts, tail boom landing gears, main rotor mast, and hubs. Rig rotor systems, conduct rig check on main rotor systems, tail rotor systems, stabilator and pitch control links. Requisition aircraft parts in accordance with parts manuals. Maintain Blackhawk’s FLIR system. Train and mentor junior employees on phase maintenance requirements. Troubleshoot landing gear, flight controls, anti-icing, pneudraulics, engines, auxiliary power units, ventilation and heating systems. Inspected and installed primary servo, hydraulic pumps, bell cranks, engine starter, hydro mechanical units, load demand system cables, walking beam.
- Informal recognition for exemplary program support and positive work ethic led to assignment of additional duties on the Blackhawk Phase Team.
- Quickly adjusted to austere working and living conditions in dynamic working environment with ease and confidence, insuring continuous work flow and trust from team lead and army personnel.
- Instrumental in accomplishing phase maintenance with 20% less aircraft mechanics during end of contract period, avoiding unnecessary delays to flying mission.
0-5 years of experience
Learned value of teamwork, discipline, and problem solving skills in basic training.
- Inspected tools and safety equipment on a daily basis for damage or missing parts.
- Inspected aircraft, aircraft parts, and support equipment for discrepancies.
- Created reports based upon discrepancies found.
- Updated user manuals when updates were released.
- Prepared workspace for cleanliness inspections.
- Proficient in Microsoft Office
0-5 years of experience
- Repaired, reworked and replaced components or parts of systems following approved maintenance procedures and operating specifications.
- Performed adjustments and settings according to specifications.
- Conducted aircraft inspections and/or test by visually checking equipment and parts.
- Examined system diagrams, drawings and manufacturers data making required repairs.
- Performed difficult repairs to and maintained a variety of major systems assemblies and surfaces.
0-5 years of experience
UH-60M to MH-60M conversion through removal and modification of old and new components.
- Used technical Manuals and engineering drawings to remove modify and reinstall: Engines, Transmissions, Flight controls, Rotor blades, Fuel cells, Fuel probes, Pitot static lines, Force generators, Fuel dump components, Engine quadrants and Fuel Pallets.
- Performed Unscheduled/ scheduled Maintenance on MH-60M test aircraft.
- Conducted MH-60M refueling and defueling in accordance with flight test specifications.
- Complete de-modification and preservation of Uh-60M aircraft to facilitate maintenance for Airframe an Avionics technicians.
0-5 years of experience
Aircrafts worked on CESSNA, F-27 FOKKER, and B-727
- Responsible for maintenance of the aircraft structure, hydraulic brake system, pneumatic system, electricity system, engine, such as turbo engine and turbo shaft engine;
- Performed line duties and support equipment gear placement
- Measured or repair worn, defective, or damaged components using hand tools, gauges, and testing equipment
- Maintained and repaired, flight control, vibrations, rigging, leaks, and rebuilt engine components
- Read and interpret blue prints, maintenance manuals, service requirements, and other specifications to determine method of repair and/or replacement components
0-5 years of experience
Performed hourly, special, and post flight inspections on the AH-64, UH-60, and OH-58 airframes
- Effectively diagnosed and repaired critical areas
- Active involvement with pilots regarding in-flight safety
- Strong working relationships with Avionics and Sheet Metal crews
- Additional experience working with Phase, Flight line, and Unscheduled Maintenance areas
6-10 years of experience
- Maintained serviced and inspected all components of the UH-60 Blackhawk Helicopter
- Worked on team with other mechanics to complete scheduled and unscheduled maintenance
- Trained and supervised other mechanics to do 500 HR Inspections on UH-60 helicopters
0-5 years of experience
Performed general aircraft mechanic duties on UH-60 & T-700 Series Engines RESET team.
- Performed replacement and repair of aircraft and components.
- Serviced and lubricated aircraft systems and components.
- Performed scheduled and special inspections and maintenance checks on AH-64.
0-5 years of experience
Deployed to Afghanistan during “Operation Enduring Freedom”.
- Volunteered to return to Fort Eustis as A.I.T Student 15U – (Chinook Repairer Course) in order to support deploying Unit.
- Completed 15B- (Aircraft Engine Mechanic Course) US Army Aviation Logistics School.
- Performed limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required.
0-5 years of experience
Routed and expedited the movement of engine parts, end items, supplies, and materials
- Identified and determined distribution on a wide variety of items in a receiving or storage function
- Obtained necessary information and prepared records, documents and reports
- Disassembled engines
- Inspected parts such as turbine blades and cylinders for corrosion, wear, warping, cracks and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment
- Conducted routine and special inspections as required by regulations
- Cleaned, refueled, and changed oil in line service aircraft
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and de-icers to locate cracks, breaks, leaks, or other problems
0-5 years of experience
Removed, inspected, replaced and installed aircraft parts/subsystems assemblies (engines, rotor heads, rotor blades, gearboxes, transmissions, mechanical flight controls and their components).
- Performed special inspections, scheduled inspections, phase maintenance, resets, and maintenance operational checks on CH-47D/F helicopters.
- Performed teardown and buildup on CH-47D/F during port operation task/ support.
- Performed maintenance on CH-47D/F helicopters and aircraft subsystem components helicopters.
0-5 years of experience
Performed RESET Program maintenance on UH-60L Black Hawk and CH-47D Chinook helicopters.
- Completely disassembled and reassembled blades, engines, transmissions, drive shafts, tail rotor gear, and support structure to the highest quality of workmanship and safety standards.
- Removed, inspected, cleaned, replaced, repaired, and reinstalled various hydraulic components.
- Inspected airframe zones for faults, cracks, fissures, and corrosion and correct structural discrepancies of aircraft to airworthiness standards in a timely and cost effective manner.
0-5 years of experience
- Conducted all maintenance duties to include direct/hands on maintenance, scheduled, unscheduled, special, daily, pre-flight/post-flight, and phase inspections.
- Completed all work to certify maintenance met standards and aircrafts ready for operation.
- Ensured safety and compliance with aviation tasks and procedures.
- Performed operational checks on helicopter systems and subsystems.
- Examined and inspected aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
0-5 years of experience
Performed induction, disassembly, assembly, and final assembly processes following AS9100 and AS9110 quality standards on CH-53E Helicopter with little to no supervision
- Performed FOM (Facilitate Other Maintenance) tasks to support sheet metal artisans
- Utilized fabrication tools to create steel hydraulic lines and aluminum fuel and vent lines
- Inspected structural components prior to installation
0-5 years of experience
Flight line mechanic in charge of overnight inspections, quick transit, engine change, troubleshooting, and fix any incoming discrepancies.
- Flight mechanic for Trans Meridian Airlines in a Boeing 757-200.
- Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments.
- Complete all tasks to the quality standards of, FAA and customers approved maintenance manual.
- Perform work within estimated or budgeted hours.
- Perform such typical maintenance operations as the removal and replacement of aircraft and power plant components that require bolting, torqueing, adjusting rigging and safety wiring, including power plant and flight control removal and reinstallation.
- Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness. Ensure that customer aircraft maintenance documents are accurate and properly annotated.
- Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess operating certification.
0-5 years of experience
Adjusted, removed and replaced all aircraft parts such as control cables, fuel tanks, spark plugs, tires, batteries and filters, cowling, engine covers, floor boards and related items.
- Assisted in towing and jacking aircraft, disconnecting instruments, ignition systems, and fuel and oil lines.
- Assisted in the dismantling, repairing, overhauling or replacing parts and assemblies such as engines, plumbing and hydraulic systems, and aircraft structural sections.
- Performed other routine duties such as furnishing materials, tools and supplies to mechanic; lifting and holding materials in place during operation; cleaning work areas and machines, tools and equipment, cleans aircraft, interior and exterior parts and assemblies.
- Assist flight line mechanic, worker, or servicer in servicing and repairing aircraft prior to flight.
- Retrieved and delivered all aircraft parts under military regulations.
0-5 years of experience
Performed organizational, intermediate, and depot level maintenance, modification and repair of aircraft systems
- Qualified to run jets over 2 engines, J57-5-W, TF-33, CFM-56 engines for the KC-135 A, EC, RC, WC, R/RT KC-135 aircraft
- Service, remove, replace, modify and install function components, mechanical and electro-mechanical systems in accordance with maintenance manuals and test procedures to ensure air-worthiness
- Modified circuit breaker panels, batter box installation, intercom system modifications
- Maintenance Inspector/Quality Assurance Inspector
6-10 years of experience
Performed structures and sheet metal work on Saab 340/EMB 120 and Canidair RJ 50
- Structural Mechanic responsible for scheduled and unscheduled upkeep on company aircraft
- Utilized technical data to performed structural repairs on fuselage and flight controls
- Performed inspections as needed for pre, in-progress and post maintenance airworthiness certification
- Customer Service Agent at gate and ramp, international and domestic cargo expediter, operations agent, and flight crew analysis designee
6-10 years of experience
Flight Line Mechanic tasked with the maintenance of Gulfstream 3, 5 and 550 Aircraft
- Perform Pre-flight, Post-flight, re-fuel and de-fueling operations
- Scheduled and unscheduled maintenance using Gulfstream CMP.net
- Cleaning of interior and the waxing of the exterior of aircraft
- Engine run certified on Gulfstream 3
- Awarded Flight Line Mechanic of the Quarter/ 3rd Quarter-2013
0-5 years of experience
Possessed Active Secret Security Clearance
- Performed scheduled and unscheduled maintenance on Cessna Citation 560 Encore
- Performed all aspects of flight line maintenance on Cessna Citation 560 Encore
- Performed all phase maintenance on Cessna Citation 560 Encore
- Possessed Engine run qualification on Citation 560 Encore
0-5 years of experience
Four years of structural sheet metal and CFRP Carbon Fiber Reinforced Plastic repair
- Assemble, connect and integrate 787 aircraft parts into the 43, 45 and 46 section by disassembled & reassembled according to engineering requirements involving structural, electrical, hydraulic and mechanical operations
- Two years of experience in aircraft fuel systems
- Apply my knowledge of Redars/EID and Velocity to locate engineer installation drawing / IP’s to answer customer and quality issues with mechanical and electrical (Pickups) found during and after final shake of airplane
- Compliant with every FAA regulation
- Extensive knowledge in the use of micrometers, rivet guns, power and hand drills, dial indicators, lathes, grinders, pressure gauges, ohmmeters, torque wrenches, timing lights, sheet metal shears, spray guns, and other items.
- Excellent people and organizational skills based on 5S and Lean principles
0-5 years of experience
Repair and Reclamation
- Extensive knowledge in the recovery of crashed and disabled aircraft
- Completed 30 aircraft phase inspections
- Trained over 25 employees on flight control operation, troubleshooting and rigging of A-10C thunderbolt II fleet
0-5 years of experience
Army Aviation Support Facility #2
- Phase inspections and unscheduled maintenance in the course of phase inspections. Performed removal and inspection on UH-1H and UH-1V.
- Areas of inspections include landing gear assemblies, crew stations, main transmission, main rotor and tail rotor systems, pneudraulics, and flight controls.
- Updated inspection records in the ULLS-A system in accordance with customer requirements and return aircraft to operational status.
0-5 years of experience
Perform line maintenance on B707, as well as heavy overhaul, phase check maintenance, and corrosion control
- Removed and replaced flight landing gears and flight controls, and re-rigged
- Perform engine changes with Pratt & Whitney, JT8D-219, as well as thrust reverse rigging
- Diagnose, adjust, repair, or overhaul aircraft engines and assemblies, such as hydraulic and pneumatic systems. aircraft engine specialists
- Maintain work area in a neat, clean and safe condition at all times
- Report any inoperative equipment to Lead Mechanic
0-5 years of experience
Inspected completed work to certify that maintenance met standards and that aircraft were ready for operation.
- Maintained repair logs, documenting all preventive and corrective aircraft maintenance.
- Conducted routine and special inspections as required by regulations.
- Examined and inspected aircraft components, including landing gear, hydraulic systems, and transmissions to locate cracks, breaks, leaks, or other problems.
- Inspected airframes for wear or other defects.
- Modified aircraft structures, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Installed and aligned repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Cleaned, stripped, primed, and sanded structural surfaces and materials to prepare them for bonding.
- Reviewed documents such as production schedules, work orders, and staffing tables to determine personnel and materials required.
0-5 years of experience
Perform inspection on Cessna 152, 172, 182, 210, 310, 320, Gulfstream American GA-7 Cougar, various Beechcraft Baron, Bonanza and Piper models.
- Remove and install powerplants, rebuild Hydraulic brake calipers and actuators, troubleshoot electrical problems.
- Repair, replace, and assemble parts, such as wings, fuselage, fuel systems, tail assembly, landing gear, control cables, turnbuckles and cable rigging.
- Removed and replace skin panels and aircraft fasteners, remove and install rivets sheet metal repair.
- Corrosion control and aircraft painting.
- Preventative maintenance, Inspection, read manuals and ATA codes, Identify unsafe conditions and correct by approve methods. Always keeping a neat and organized work area
0-5 years of experience
Perform scheduled and unscheduled maintenance on general aviation aircraft.
- Perform minor sheet metal and structural repairs on general aviation fixed wing and rotary wing aircraft.
- Supervised other mechanics and helpers.
- Perform aircraft ground engine runs.
- Perform maintenance on Robinson R22 helicopters to include performing scheduled and unscheduled maintenance.
0-5 years of experience
Perform scheduled and unscheduled maintenance on PC-12, U28, Dornier 328 airframes to Support the 318th Special Operations Squadron in ISR and related missions.
- Service oxygen and nitrogen systems, air conditioning systems, hydraulic systems, inspect electrical systems, fuel systems and flight control systems.
- Complete Mini 1-6 Insp, scheduled Phase Inspections as per Pilatus, and Dornier AMM
- Inspect engine, landing gear, instruments, pressurized sections, brakes, valves, pumps, air-conditioning systems and other related parts
- Perform launch and recovery operations, re-fuel aircraft in relation to mission configurations for proper weight and balance.
- Maintain complete and accurate maintenance records
0-5 years of experience
Complete daily and periodic inspections to ensure safer evolution of day and night flights.
- Perform preventative, routine and unscheduled maintenance actions on aircraft power plant and fuel systems.
- Troubleshoot and diagnose aircraft power plant and fuel systems in a safe and timely manner.
- Provide quality functions for everyday job task as required by maintenance instruction manuals.
- Responsible for maintaining training records of marines in the powerline division.
- Created new, and adopted existing training lessons on the installation and removal of different parts on the F/A 18 aircraft or handling of hazardous material
0-5 years of experience
- Advised on problems maintaining, servicing, and inspecting aircrafts. Used technical data to diagnose and solve maintenance issues on aircraft systems
- Maintained aircraft structures, systems and components
- Performed launch, recovery, tow, and maintenance tasks on 36 assigned aircraft valued in excess of $10.1 billion
0-5 years of experience
Inspect and evaluate components on aircraft for damage, wear, and/or improper installation, and verify correct usage of components and parts.
- Perform corrosion removal and apply paint on aircraft, aerospace ground equipment (AGE), and aircraft parts; processes include sanding, blasting, stripper materials, masking, and preparation for painting on a variety of textures.
- Wash and grease P-3, C-130, KC-135 and E-3 aircraft.
- Perform minor sheet metal and airframe repairs.
- Produce and apply all related aircraft unit markings via Gerber Omega 3.0 software.
0-5 years of experience
Performed MQ-1 ground handling and maintenance activities in support of Operation Enduring Freedom
- Qualified on virtually all MQ-1 power plant and airframe systems
- Uses TO’s, EO’s and various technical data to troubleshoot and solve maintenance issues on the MQ-1 Airframe and Rotax 914I engine systems
- Performs 1080, 720, 150 and 60 hour engine and airframe inspections
- Removed/Replaced/Rigged all flight control and landing gear servos
- Coordinated maintenance and service for units 8 vehicle fleet
- Performed composite repairs on flight control and airframe components
- Performs Pre, Post and Thru-Flight Inspections.
- Launch/recover, tow, and aircraft jacking qualified: MQ-1
0-5 years of experience
Assist in scheduled and unscheduled maintenance of the C-40A aircraft, associated aeronautical equipment and aircraft support equipment.
- Service and clean the C-40A aircraft.
- Assist in turnaround and daily inspections of the C-40A aircraft
- Maintain, troubleshoot, and repair aircraft hydraulic systems
- Inspect and maintain flight control systems and landing gear systems
- Demonstrate knowledge of maintenance documentation and procedures
6-10 years of experience
Assembled and installed electrical, plumbing, mechanical, hydraulic and structural components and accessories, using hand or power tools
- Read and interpreted blueprints, illustrations, and specifications to determine layouts, sequence of operations or identities and relationship of parts
- Conferred with supervisors, inspectors, and/or engineers to plan or review work activities or to resolve production problems
- Adhered to all safety and hazard procedures
6-10 years of experience
Assembled and installed electrical, plumbing, mechanical, hydraulic and structural components and accessories, using hand or power tools
- Read and interpreted blueprints, illustrations, and specifications to determine layouts, sequence of operations or identities and relationship of parts
- Conferred with supervisors, inspectors, and/or engineers to plan or review work activities or to resolve production problems
- Adhered to all safety and hazard procedures
Rate This Article
[Aircraft Mechanic]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
