- Featured in:
-
More Forklift Mechanic Resumes
Use these Forklift Mechanic samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mechanics Resume Samples
Forklift Mechanic Resume Samples
No results found
0-5 years of experience
Performed monthly PMs and general maintenance on over 100 pieces of equipment, including machines, batteries, and chargers
- Updated database on a daily basis to ensure accurate records
- Procured and maintained parts supply through monthly inventory to alleviate
- Documented machine costs for fleet management; performed database setup for each piece of equipment
0-5 years of experience
- Maintained and serviced forklift fleet at two locations.
- Ordered parts and materials required for maintenance and service.
- Managed inbound and outbound teams, consisting of 4 to 10 members.
- Recorded and reported daily inbound and outbound activities.
- Provided management with employee evaluations based upon KPIs.
0-5 years of experience
Completed diagnosis and repair of all aspects of all types of material handling equipment including forklifts (diesel, L.P., gasoline, DC electric), dock plates bailers, and overhead doors
- Solely responsible for ensuring customer satisfaction for all assigned calls
- Maintained inventory and equipment for company supplied vehicle
- Delivered and picked up all rentals and customer-owned equipment
0-5 years of experience
Maintained prototype forklifts in the reliability and growth group during and after initial testing and durability stages of production.
- Performed hydraulic component replacement, testing, and diagnosis.
- Installed test gauges and sensors including thermocouples, readouts, lap counters.
- Completed initial teardown and documentation of lifts, looking for possible failures or problems incurred in and after basic testing. Reported findings to engineers.
- Performed basic maintenance such as tires, lube, pm servicing.
0-5 years of experience
Maintain all Crown MC, RR, SP & WP forklifts
- Responsible for all preventive maintenance checks and ordering of parts
- Repaired and replaced all parts as needed
- Troubleshoot, analyzed and inspected all forklifts
0-5 years of experience
One of seven mechanics servicing all store equipment for all Raley’s supermarkets in Northern California sent for repair to the distribution center warehouse.
- Work on and operate all types of warehouse machines including forklifts, reach trucks, pallet jacks, and order
- Certified by the Hyster Company to repair pallet jacks, store jacks and high reaches.
- Responsible for and led repair efforts during the night shift.
- Facilitate orders from store to ensure product is shipped in a timely manner.
- Build pallets, shrink-wrap orders and load trailers for distribution of products to stores in the Northern
- Received monthly awards & monetary bonuses for exceeding production quotas.
0-5 years of experience
Start-up, operate and shut-down the refrigeration system safely and to ensure quality of customer products and energy efficiency.
- Perform limited electrical work, such as replacement of circuit components.
- Perform limited repairs to the refrigeration system.
- Observes and records pressures, temperatures, and electrical readings and adjusts controls to obtain specified operational targets.
- Inspect all refrigeration system equipment to ensure safe and reliable operations.
- Maintain soft water systems, doors, dock locks, fire systems, Maintain soft water systems, doors, dock locks, fire systems, and forklifts.
- General maintenance, welding and fabrication.
0-5 years of experience
Responsible for all mechanic, electrical, fuel, and hydraulic repairs on equipment. Manage and maintain over 70 different types of industrial equipment. Diagnose electrics, LPs, diesels, gas, units from 5,000 lbs. to 60,000 lbs. lifting equipment. As a traveling technician, covering from Central Georgia to Mid Florida.
- Change regulators, lock off valves, switches, transmission, and engines MCPL01 Forklifts
- Replace cylinder calipers, drums and complete brake overhaul
- Check engine coil for idling problem bad coil
- Change gas unit over to LP gas for clearing running for food processing
- Repack inner and outer lift cylinder replace wiper, seals, and o-rings
0-5 years of experience
Performed preventative maintenance on equipment
- Engaged in troubleshooting of equipment problems and made repairs as needed
- Obtained parts and maintained parts inventory
- Completed and submitted paperwork and followed company policies and safety standards
0-5 years of experience
Maintained and repaired forklifts on site at Big Red.
- Road Mechanic-traveled statewide to customer locations to troubleshoot and repair forklifts.
- Provided customer service to clients via telephone and in person for part sales and repair.
- Delivered parts to customers throughout Georgia.
0-5 years of experience
Worked on in-line 4 and 6 cylinder engine.
- Performed service work, checked oil levels, coolant levels, transmission fluids, etc.
- Lubed all grease fittings, changed air filters, oil filters, and fuel filters.
- Removed and replaced bad or worn-out radiators, oil coolers, and transmission coolers.
- Resigned from this position after accepting position offering better opportunity from Southwest in Houston.
0-5 years of experience
Serviced and repaired forklifts
- Repaired hydraulic leaks
- Repacked cylinders
- Replaced tires
- Light electrical repairs
- Provided customer service while working in the field
- Wrote customer service tickets
6-10 years of experience
Responsible for maintenance and repair on 21 gas and electric forklifts, 19 loading docks, 20 overhead doors and 38 pallet jacks.
- Control inventory on general maintenance and repair parts.
- Set up and maintain maintenance program on equipment.
- Maintain a clean and safe working environment.
6-10 years of experience
Preventative Maintenance and Repair of electrical forklifts
- Familiar with use and programming of Red Perry inventory control system
- Responsible for training of subordinates in safe operational procedures
- General Building Maintenance
- Maintained preventative maintenance records and parts orders
- Inventory control of parts and assemblies
0-5 years of experience
Created Equipment Service Parts List for all PMs, weekly PM checklist for 250hr, 2000hr, and 6000hr
- Maintain, check, and order parts for forklifts, man lifts, golf carts, cranes, bobcats, pushbacks, etc.
- Instruct, assign work to, and supply tools for Mechanic Helper and self
- Handle all overflow work for GE Facility Maintenance Crew
6-10 years of experience
Primarily responsible for the preventive maintenance and repair of material handling equipment.
- Responsible for work orders and inventory supply.
- Authority to initiate work order for outside technical and production challenges.
- Provide repair and maintenance to the BHS battery changer.
- Building maintenance as assigned.
0-5 years of experience
Provide customer service and provide preventative maintenance service when requested.
- Repair all kinds of forklifts and revamp automobiles when necessary.
- Diagnose problems quickly and accurately which also requires analytical ability.
- Maintained accurate inventory and handled shipping and receiving.
0-5 years of experience
Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.
- Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
0-5 years of experience
Diagnose, service, and maintain mechanical lifting equipment.
- Work is performed on powered lift machinery including electric, gas, propane, and diesel, as well as non-powered pump jacks and hydraulic equipment.
- Workers must maintain a clean, safe environment and assure compliance with all regulations, including OSHA and the DOT.
- Possess knowledge of mechanical, electrical, and hydraulic systems.
- Perform services such as cleaning, lubrication, and engine and lift repair, battery maintenance.
0-5 years of experience
Everyday look at request board
- Monthly maintenance on every Forklift
- Checking oil, battery, grease sockets, wheels, levers and buttons
- Going to different customers and repairing what is requested
- Cleaning the forklifts
- Cleaning all tools and putting them back where they belong at the end of the day
0-5 years of experience
Clean, lubricate, and perform routine maintenance work on forklift equipment and vehicles.
- Overhaul, dismantle and reassemble heavy equipment using hoists and hand tools.
- Test forklifts and equipment; examine parts for wear or damage using micrometers and gauges.
- Repair, rewire, and troubleshoot electrical systems; read manuals, blueprints, and schematics.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Weld or fabricate broken parts and structural members using MIG welders and plasma torch.
- Adjust, maintain, and repair transmissions and flywheel using hand tools, jacks and cranes.
- Diagnose faults or malfunctions using computerized test equipment and calibration devices.
- Schedule maintenance for forklifts and machines, keeping detailed service records and invoices.
- Exercise sound independent judgment within established guidelines.
6-10 years of experience
Inspect and repair electronic parts and reassemble
- Repair and replace damaged or worn parts.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Operate and inspect machines or heavy equipment to diagnose defects.
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers’ specifications.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Read and understand operating manuals, blueprints, and technical drawings.
- Overhaul and test machines or equipment to ensure operating efficiency.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Examine parts for damage or excessive wear, using micrometers and gauges.
0-5 years of experience
Responsible for maintaining a fleet of 40 pieces of equipment.
- Scheduled PM’s for forklift, scissor lifts, Batteries & chargers.
- Troubleshoot and repair equipment as needed.
- Responsible for Purchasing and maintaining a proper parts inventory to eliminate extended down time.
- Responsible for working with outside venders to help the company strive in the right direction.
- Helped with facility maintenance to maintain the appearance of the corporate office.
- Helped PM and repair the production lines as needed.
- Forklift Trainer, responsible of all video testing & actual operator training on all forklifts, scissor lifts and scrubber for the corporate office.
- A member of the safety committee.
0-5 years of experience
Preventive maintenance on forklifts
- Repair blown hydraulic hoses
- Rebuilding transmissions
- General maintenance on lifts in the shop and on location
- Used hoists and cranes to lift work pieces to machine.
- Maintained positive relationships with all customers.
0-5 years of experience
- Responsible for services and maintenance on various forklifts and yard tractors for major manufacturers and warehouses.
- Trouble shooting and repairs on various forklifts and yard tractors
- Hydraulic cylinder rebuilds and trouble shooting
- DC trouble shooting and repair
6-10 years of experience
- Troubleshoot and repair wide range of equipment, including scissor lifts, Boom trucks, lift gates, I-beam gantries, sweepers, scrubbers, vacuums, skid loaders (Linde hydraulic drive units, Bobcats, Caterpillars, Clarks, Mitsubishi, Hyster, Komatsu).
- Inspect chain hoists, lift hoists, building, tools, air systems, electrical systems and all moving equipment.
- Assist in training entry level employees.
- Accept work assignments pursuant to contracts.
6-10 years of experience
Troubleshoot, diagnose and repair gas propane engine forklifts
- Conduct inspections and preventative maintenance of forklifts
- Maintain cleanliness of all forklifts, tools, and customer facilities
- Communicate with customers and review recommended repairs
- Place part orders and complete repair paperwork
6-10 years of experience
- Created first ever Preventative Maintenance (PM) program for forklifts, saving the company on downtime and service costs.
- Implemented changes to the Raymond 4700 sit down lifts. These changes were adopted at the Raymond production Facility.
- Strong Understanding of OSHA guidelines and standards.
- Experience with keeping 36v forklift batteries serviced and repaired.
- Able to read and understand electrical schematics and wiring
- Responsible for maintenance on various hydraulic motors and pumps.
- Proficient in the repair of various electric sit down counterbalanced lifts including Yale, Toyota, Clark, and Raymond. Also experienced with repair of cascade Push pull attachments
- Singularly responsible for maintaining a fleet of 17 Forklifts, with an 85% availability rate.
0-5 years of experience
- Service, Operate, and repair tractors and forklifts.
- Locate and relocate, store and log, load and unload freight and parts.
- Coordinate operations to support internal and external customers.
- Train and lead new team members
- Ensure compliance with environmental health, safety, and corporate regulations.
6-10 years of experience
Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
- Assemble install, and repair wiring, electrical component equipment.
- Record type and cost of maintenance or repair work.
- Clean or lubricate shafts, bearings, gears, or other parts of machinery.
0-5 years of experience
Followed checklists to verify that all important parts were examined.
- Examined vehicles to determine the extent of damage or malfunctions.
- Repaired and replaced belts, hoses and steering systems.
- Operated pneumatic tools and air compressors.
- Removed and replaced tires and brakes.
- Repaired and replaced radiators and water pumps.
- Installed timing gears and timing belts.
- Worked on a variety of vehicles, including semi-trucks and forklifts
- Repaired hydraulic pumps, couplings and gear trains.
0-5 years of experience
Work on Propane/Gas Forklifts. Including preventive maintenance.
- Work on Electrical Forklifts using Volts.
- Specialized in Crown and Komatsu Forklifts.
- Heavy Duty engine repair John Deere engines.
- Body work and painting.
0-5 years of experience
Forklift preventative maintenance
- Hydraulic troubleshooting, rebuild, and repair
- Diesel engine troubleshooting and rebuilding
- Customize equipment per customer request.
- Perform hydraulic system load test and functionality test
6-10 years of experience
Certified forklift technician for Raymond of NJ
- Perform scheduled maintenance on forklifts
- High understanding of electricity, meters, components, AC/DC electricity motors
- Perform diagnostics and troubleshooting
0-5 years of experience
- Provided maintenance services
- Overhauled engines.
- Reconditioned and painted forklifts.
0-5 years of experience
- Service and Repair forklifts.
- Stock and manage forklift parts inventory.
- Train new employees
- Directly deals with outside vendors
Rate This Article
[Forklift Mechanic]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
