- Featured in:
-
More Laser Technician Resumes
Use these Laser Technician samples as a guideline or visit our extensive library of customizable best resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Medical Resume Samples
Laser Technician Resume Samples
No results found
0-5 years of experience
Performed hair removal and skin renewal treatments with the Aurora Syneron laser system
- Acquired over 3,000 hours of practical experience using the Syneron laser
- Certified with IPL-RF laser using Elos technology
- Performed micro-derm abrasion facial treatments
- Determined which products and procedures would be appropriate for each individual patient
- Coordinated daily management duties involving meeting sales quotas and fulfilling the scheduling agenda
- Directed the training of new employees on the Syneron laser and supervised treatments
10+ years of experience
Owned and operated a successful business with a diverse client base.
- Delivered 24 hour service and support of laser equipment technology.
- Installed 1000 to 4000 Watt (Panasonic and Fanuc) 2D and 3D laser systems
- Configured all integrated automation, communication, and software systems
- Performed needed system maintenance
- Managed all aspects of customer care, including scheduling, invoicing, technical reports, and billing.
- Designed and delivered technical and safety training to help customers maintain their ISO status.
- Developed investment and inventory strategies for increasing customer satisfaction and profitability.
6-10 years of experience
Construct and test solid state laser using theory of laser engineering principles/electronic circuits. Install electronic components along with optics while aligning for peak power, mode and stability. Assembled sub assembly parts, optics and perform test per procedure.
- Utilize hand/power tools, power supply, run box, 5 axis stages, HeNe laser, oscilloscope and Spiricon equipment in constructing/aligning laser. Operate thermal chamber to monitor environmental changes. Recorded data into SAP and OHS system to be analyzed.
- Assisted engineers in solving problems that might cause delay in production, test to increase yields and process improvement. Made use of drawings, knowledge of lasers to assist in troubleshooting laser, optical coatings and electronic or software issues.
- Usage of high powered microscope to visually inspect laser optics, electronic harness and circuit cards for defects, scratch/dig, corrosion/flaking and matching corresponding part numbers associated with paper work. Reviewed documentation for completeness/accuracy.
- Recognized for assisting in cost cutting measures involving the reuse of laser parts, catching defect parts and keeping track of lots of parts that may cause a delay in building of the laser. Received recognition by reducing labor cost per laser, achieving high production yields and saving company resources.
10+ years of experience
Provided deep cleaning, anti-aging and multi-vitamin facials, Vitamin C treatments, peels and Microdermabrasion.
- Provided lash and brow tinting
- Conducted pre and post consultations to prevent contraindications
- Educated guest on necessities for daily home care regimen
- Trained and certified to use Candela Gentlelase Plus and LightSheer Duet lasers
- Performed laser procedures for patients and provided post-treatment instructions and care
- Scheduled appointments, received payments, and organized treatment records
- Keyed client information into computer database in order to maintain organization of office and client records while maintaining a high level of client confidentiality
0-5 years of experience
Provided laser hair removal treatments using the safest and most effective laser application.
- Experienced in basic & advanced facial treatments.
- Developed customized, therapeutic skin care treatments.
- Provided extensive client’s skin analysis and consultation.
- Advised clients regarding a home-care regimen
0-5 years of experience
[company name] used diode laser to reduce hair growth and make hair finer.
- Conducted laser hair removal
- Managed new client applications and entered information into computer system
- Trained new employees, handled daily emails, and answered phones
6-10 years of experience
Contributed in developing methods and procedures to control or modify the manufacturing process
- Performed moderate to complex alignment on lasers systems used for different projects.
- Supported engineers in set-up and calibration tasks
- Performed rework and quality testing related to the production of parts, components, subassemblies and final assemblies
- Evaluate operating data to conduct on-line adjustments to products, instruments or equipment
- Diagnosed and resolved routine questions and problems.
0-5 years of experience
Built and tested solid-state lasers including set up, calibration testing and trouble shooting of systems
- Aligned free space optics to optimize laser beam characteristics and assembled both mechanical and optical components into laser systems
- Tested and trouble shot product(s) to specification as set by the engineering staff
- Maintained equipment and test stations including removal and replacement of equipment on a regular maintenance schedule as determined by compliance with ISO 900 family of standards
- Tested and trouble shot assemblies and/or final systems as well as complete rework on assemblies.
- As required, prepare technical reports summarizing findings and recommended solutions.
0-5 years of experience
Handled customer payments, requests, and scheduling.
- Ordered supplies and maintained inventory.
- Provided administrative support to managers.
- Maintained and created files and record keeping systems. Sorted, labeled, filed and retrieved documents and other materials for reference.
- Prepared management reports and financial summaries detailing company’s financials.
- Oversaw cash accountability and closing operations on a nightly basis.
- Demonstrated continuous effort to improve operations, streamlined work processes and worked
0-5 years of experience
Experienced in esthetic laser treatments and skin rejuvenation, pre and post treatment laser procedures, and skin care consultations
- Provided esthetic laser treatments using the safest and most effective laser applications
- Effectively evaluated clients based on the Fitzpatrick scale and determined appropriate laser settings
- Recognized potential contraindications and properly assessed any adverse reactions to treatment
0-5 years of experience
Demonstrated the ability to learn new business development processes, workflow, implement HR policies and procedures in conjunction with owner
- Established strong vendor relationships
- Created databases and spreadsheets for improved inventory management and reporting accuracy
- Certified in Cutera Laser, Synaron’s Vela Shape, and Skin Medica’s Chemical Peel
0-5 years of experience
- Completed progress notes including patient history and care provided
- Provided proper techniques for laser procedures
- Assembled laser supplies and maintained equipment
- Processed transactions for clients for services rendered and scheduled appointments
0-5 years of experience
Analyzed clients skin and customize specific treatments for their needs
- Educate clients on the importance of recommended home care regimen
- Performed Laser Hair reduction, Skin tightening, Pixel Resurfacing, and Photo Facials
- Accomplished 92% Retail to Service
- Averaged 9/10 on all client feedback forms for each service
0-5 years of experience
Performed Laser hair removal and skin-rejuvenation with FDA approved lasers.
- Performed Facials, Microdermabrasion and non-invasive cellulite reduction.
- Consulted with potential clients on services provided.
- Consulted with potential clients on services provided.
- Performed Laser hair removal and skin-rejuvenation with FDA approved lasers.
- Performed skin analysis, Facials, Microdermabrasion, techno-lift, Spray tanning, Waxing.
- Advised clients on skin-care treatment and products.
0-5 years of experience
Performed 30 and 60 minute facials, Oxygen facials, High Frequency, chemical peels, and microdermabrasion
- Coherent Laser Technician (Spider veins, Resurfacing, Pigment, Lesion removal, and Hair Removal)
- Applied CoolSculpting to targeted areas
- Performed BodyFX Body Contouring and Cellulite Treatments
- Performed Fractora F.I.R.M. to the face, neck, and body (Fractional Thermal Contraction)
- Assessed clients for body exfoliation and specific thermal wraps
0-5 years of experience
Assistant supervisor of the prototype parts department
- Daily duties include using customer supplied prints to develop part geometry in AutoCAD, determining the best manufacturing process, and troubleshooting any issues
- Eliminated backlog of prototype orders to maintain an up-to-date production schedule
- Responsible for training new employees, including developing and constantly improving training manuals and programs
- Work closely with the quality and sales departments to resolve any customer concerns or changes quickly and efficiently
- Responsible for keeping all machines within the department maintained and operating at peak ability
- Earned several area achievement awards for consistently exceeding expectations
0-5 years of experience
Interview clients and perform LHR procedures safely and effectively
- Promote the Premier Brand, instilling value and up-selling procedures
- Exceeded current sales plan by 170%
- Top sales technician 2014
0-5 years of experience
Efficiently manage client appointments, perform sales calls and appointment reminders and update records ensuring clinic stability
- Sell skincare products to customers, exceeding given quota by 5% weekly
- Effectively organize and inventory all equipment, implements, stationary and merchandise
- Use strong customer service skills to ensure all customer questions and concerns are answered
- Responsible for processing transactions for all events, payment and membership fees up to $1,500 per day
- Maintain a clean, safe and well-organized working environment
0-5 years of experience
Performed a variety of technical functions related to the calibration, alignment, fabrication, assembly and modification of laser assemblies and optics in accordance with established practices, procedures and product/process documentation.
- Modified and updated work instructions.
- Proposed new integration techniques.
- Maintained a high level of compliance.
6-10 years of experience
Organize and manage scheduling and staff of 20 amongst various office locations.
- Provide experienced consultations on various products and services including Botox, dermal fillers, skin rejuvenation, cosmeceuticals and skin care.
- Produce marketing and sales strategies that resulted in a 35% profit increase per year.
- Treat laser clients on all modalities in high throughput environment.
- Implement new technologies to increase office efficiency and clientele history.
0-5 years of experience
Head remanufacturing technician in charge of completing orders for clients and customers.
- Implemented new strategies to improve remanufacturing
- Operated as a head laser technician
- Repaired and serviced cartridges
- Worked as a cashier for the business and its post office
0-5 years of experience
Pre and post-treatment laser procedures, consultations for skin care, laser hair removal and skin
rejuvenation.
- Provide aesthetic laser treatments using the safest and most effective laser application.
- Maintained various laser machines and their accessories.
- Effectively evaluated the client’s hair color, skin color and body area to be treated.
- Determined appreciate laser settings and techniques to deliver optimal treatment.
- Properly assessed any adverse reactions to treatment.
- Recognized contradictions to aesthetic laser procedures before treatment began.
- Properly assessed any adverse reactions to treatment.
- Specialized training on Candela, Palomar, Sciton, Cynosure, and Syneron Lasers.
0-5 years of experience
Developed clientele and relationships with existing clientele
- Performed medical aesthetic and laser treatments
- Assisted doctor in Botox and Dermal Filler treatments
- Managed pre and post-op patient care
- Conduct patient evaluations, clinical skin care regimens and retail product sales
10+ years of experience
Cares for an average of 300 patients on a weekly basis within a fast-paced dermatology practice.
- Efficiently manages the front desk by keeping billing records, entering financial transactions, scheduling appointments, and processing medical insurance claims.
- Assists dermatologists with patient care practices that included skin biopsies, cosmetic procedures, laser treatments and a broad spectrum of skin assessments.
- Prepares patients for examinations and procedures, obtains medical histories, sterilizes equipment and properly disposes of contaminated supplies and specimens.
- Coordinates laboratory-related procedures and communications
0-5 years of experience
Comfortable conducting first-time client consultations and explaining the details of the science and process behind laser hair removal.
- Confident to answer all clients’ questions regarding process and realistic results
- Able to evaluate client’s skin type according to Fitzpatrick scale and use appropriate treatments
- Perform various types of laser treatments including hair removal, skin smoothing and tightening
- Develop plan of care for client, implement plan and evaluate outcomes
- Develop individualized therapeutic skin-care programs and recommend products
- Provide peels and Microdermabrasion treatments based on customer needs.
0-5 years of experience
Lead technician for new product development of Green Continuous Wave Fiber Laser System in newly created Hybrid Laser Division
- Built non-linear frequency converters (optical resonators) using IPG’s existing fiber laser platform to create a cutting edge industrial laser system.
- Developed and documented precision laser cavity alignment and optimization techniques.
- Setup and monitored various experiment through the development phase of optical laser system.
- Collected and analyzed test data.
- Performed troubleshooting on systems using various test equipment such as beam profilers, beam positioning systems, power meters and oscilloscopes.
- Prepared and built all optical and mechanical sub-assemblies for integration into optical laser system.
- Interfaced with engineering to provide technical input and evaluation for process and system improvements.
- Used hand tools and various machine shop equipment for part machining and rework.
- Maintained inventory levels for all mechanical and optical components.
- Cleaved and fusion spliced PM and non PM Fiber.
0-5 years of experience
with laser on various body parts to achieve total hair reduction
- Greeted clients upon their arrival
- Kept detailed records of laser treatment settings
- Trained in adverse reactions and treatment
- Collected payments from clients
- Scheduled clients for future appointments
- Upsold services to clients for a commission
6-10 years of experience
Rebuild monochrome and color laser cartridges, take the cartridge apart and inspect it piece by piece, rejecting components that show fatigue or damage.
- Vacuum old toner from the inside of the cartridge, and use ultrasound to clean key components.
- Replace the photo conductor drum. This drum transfers the print image from the laser printer’s page memory to paper. Drums wear out after one or two reuses. We check drums carefully for cracking and wear. We install either new drums or known good ones that we have coated with our custom light-sensitive formulation.
- Install new regulating and cleaning blades. Each cartridge has at least one metal or rubber blade inside, similar to a windshield wiper. Some have two: one for regulating the amount of toner reaching the drum, and one for scraping excess toner from the drum. Blade angles and tensions are critical for proper operation; we match the manufacturer’s specification.
- Fill the cartridge with new graphic-quality toner.
- Reseal the toner reservoir with a new gasket to prevent powder from spilling into your laser printer.
- Reassemble and individually test each cartridge to insure proper functioning.
0-5 years of experience
- Answered a multi-line phone system scheduling appointments, and processing payments.
- Guided customers through the confidential intake process prior to receiving treatment.
- Sold services to call-in, walk-in and corporate clients resulting in increased sales.
- Treated clients for a smoking cessation program as a Certified Laser Technician.
0-5 years of experience
Conduct pre and post- treatment laser procedures, consultations for skin care, laser hair removal and skin rejuvenation.
- Provide aesthetic laser treatments using the safest and most effective laser application
- Effectively evaluate the client’s hair color, skin color, and body that are to be treated
- Recognize contraindications to aesthetic laser procedures before treatment begins
- Maintain various laser machines and their accessories
- Properly assess any adverse reactions to treatment
- Received specialized training on Candela, Palomar, Alma, Q Plus Series, and Syneron Lasers
0-5 years of experience
Alignment of laser head and production of subassemblies following schematic and proper protocol
- Managed inventory and maintenance of stock by keeping contact with vendors
- Proper and precise handling of optics working in a clean environment
- Receiving and shipping of laser devices and parts
0-5 years of experience
Conduct consultation and assessment routinely to ensure patients are not contraindicated for treatment.
- Perform safe, effective, and thorough treatments following specifications set by protocols written by medical director
- Educate and advise patients on additional treatments as while continuing to maintain superior customer relations.
- Train new aestheticians, as needed to incorporate interpersonal skills, company protocols and standards. Include assessments, charting, technique & more.
0-5 years of experience
Examine alignment of parts and measures parts for conformance to specified dimensions, using precision measuring instruments, such as micrometers, calipers, and gauges
- Responsible for the assembly and packaging of medical devices by following company procedures and all processes within the primary work area, while meeting or exceeding quality and production
- Utilized microscope, pliers, surgical blades, laser cutter, sealing machine, plasma and etching machines
- Maintain work station clean and sanitized, wear protective clothing to ensure highest quality for safety regulations
- Responsible for inspecting parts for defects, and performed quality control of the finished product before and after packaging
0-5 years of experience
Perform laser procedures and facials for patients and provided post-treatment instructions and care
- Provide front desk and clerical support, greet and checked-in clients, make client appointments, and answer any inquires or concerns via telephone
- Order office supplies, maintain functionality of equipment, and manage equipment procurement of lasers and other spa necessities
- Receive and file incoming letters and documents
- Maintain all financial bookkeeping
- Record and monitor expenses and manage monthly invoices
- Maintain stationary supplies and coordinate deliveries
0-5 years of experience
Elite technical position for cutting-edge, quantum cascade laser laboratory providing solutions for mid-infrared applications in the scientific/research, defense, and commercial arenas.
- Lead technician on multiple projects supporting customer applications in molecular detection/spectroscopy, standoff detection, and spectral beam combining.
- Extensive work upgrading and maintaining manufacturability and traceability of multiple product lines.
- Build, alignment, characterization, test, and data analysis of external cavity, tunable, quantum cascade lasers.
- Interface with operations department to manage WIP schedule. Created work instructions and build procedures for complex optical systems and subassemblies used in MRL for ISO certification.
- Responsible for training new laser technicians.
0-5 years of experience
- Delivery and setup of Greenlight laser to treat BPH and bladder tumors. Holmium lasers for kidney, urethral and bladder stones over a 5 state area.
- Operation of medical lasers during surgical cases. Preparation of laser fibers and laser instruments for surgical cases.
- Assist physicians with proper uses and techniques of the lasers including proper fiber sizes, wattage settings, and fiber protection.
- Instruct OR staff on proper safety protocols when it comes to different laser types.
- Assist scrub personnel in fiber protection and uses.
0-5 years of experience
Obtained experience in aesthetic treatments and skin rejuvenation, pre- and post-treatment laser procedures, and consultations for skincare
- Educated clients on skincare products
- Performed facial aesthetic procedures, including chemical peels
- Provided aesthetic laser treatments using the safest and most effective
- Effectively evaluated the client’s skin type using the Fitzpatrick Scale
- Determined appropriate laser settings and techniques to deliver safe
- Recognized contraindications before treatment began
- Served as a team player who worked well with other treatment provider
0-5 years of experience
Prepare patients charts for the physician.
- Maintain a multi-lined telephone system to schedule appointments and surgeries
- Perform laser, chemical and ultrasound cosmetic treatments on patients
- Maintain hygiene of treatment rooms and equipment.
- Handle credit / debit transactions
- Design office policies by establishing standards and procedures and making necessary adjustments
0-5 years of experience
Operate, monitor, troubleshoot and maintain delicate laser equipment in hospital operation
rooms during patient procedures.
- Advise physicians and surgeons on appropriate laser settings for different procedures.
- Act as a liaison to healthcare facilities to enforce laser safety.
- Testing, sterilization and inspection of equipment, transporting equipment safely to and from healthcare facilities.
- Process work orders and maintain laser logs for reference and audit purposes.
0-5 years of experience
Provide customized facials including Microdermabrasion, Micro-Needling, Dermaplaning,
Medical Grade Chemical Peels, Levulan.
- Perform laser treatments including Skin Tightening, Body Contouring, Skin Rejuvenation,
- Follow treatment parameters in accordance with the clinic medical director; provide
- Responsible for maintaining backbar supplies, updating protocols, new hire training
- Knowledgeable in SkinMedica; Certified in PCA Peel Fundamentals.
0-5 years of experience
Responsible for answering phones, making appointments and checking patients in using Practice Fusion EMR programs
- Provide patient consults for laser treatments within CMA scope of practice
- Perform laser treatments for medical conditions and cosmetic concerns
- Assists physician with hair transplant surgery including cutting grafts, monitoring patient vitals and mixing medications for procedure
- Checking patients out, taking payments and scheduling follow up appointments
0-5 years of experience
- Performed laser hair removal treatments using the safest and most effective laser application. Experienced with the Lightsheer Diode by LUMENIS. Repeat satisfied client base.
- Operated IPL Photofacial, Velashape, Diamond Tip Microdermabrasion and Laser Lipo on patients. Also trained new technicians to be able to provide treatments.
- Informed and sold treatments, packages and services.
10+ years of experience
Responsible to assemble, bond, align, test, verify beam characterization, and image quality.
- Troubleshoot complex lasers, receivers, and imaging systems optical, mechanical, electrical components.
- Knowledgeable of optics, theory of light, and theory of lasers
- Consistently met objectives for efficiency, throughput, and on-time delivery to the customer
- Assist engineering with testing, development, procedural process, and bench design
- Maintain bench integrity as well as tooling and components to sustain production
- Perform analysis and data collection to determine root cause, and provide recommendations for process improvements to decrease failure rates and increase efficiency.
- Effectively and efficiently train other engineers, technicians, and assemblers in production operations and procedures
- Proficient at interpreting and working with mechanical and electrical diagrams
0-5 years of experience
Program, setup, troubleshoot, repair and maintain all production orders
- Document and complete all necessary production paperwork including but not limited to maintenance logs/forms, routers, machine logs, equipment repair/order tags, and set-up documentation.
- Assigns daily machine assignments to Laser Operators and Inspectors accordingly
- Responsible for production counts and routers being completely and correctly filled out.
- Responsible to direct workflow through all processing steps. Aware of when and how these processes have to be done. Responsible to quarantine all products when discovering bad or suspect product.
0-5 years of experience
Monitor, troubleshoot, and maintain delicate laser equipment in hospital operating rooms during patient procedures
- Responsible for testing, sterilization, and inspection of equipment
- Transporting equipment safely to and from customer sites and processing work orders and additional paperwork
- Maintain a professional relationships with physicians, hospital staff, and office staff both in appearance and behavior
0-5 years of experience
Responsible for Removing unwanted tattoos or blemishes from patients skin using the MedLite C5 laser.
- Responsible for assembling, dismantling, installing, calibrating, testing, operating and repairing lasers.
- Perform alignment procedures, clean optics, integrate lasers with opto-mechanics parts, work on laser documentation and troubleshoot.
- Performing consultation to all patients for understanding of procedure and risks factors.
0-5 years of experience
Load and transport medical laser systems to and from customer facilities
- Review customer and medical procedure requirements and take necessary steps to deliver a successful case
- Prepare both the surgical room and hospital personnel with the appropriate protective equipment, signs and labels
- Operate and monitor laser systems and associated equipment during medical procedures
- Provide technical and safety guidance to doctor and hospital staff
- Know and enforce all applicable procedures pertaining to safe vehicle operations, safe workplace practices and laser safety
- Deliver distinctive customer service to healthcare facilities by providing a variety of services to support medical laser procedures
0-5 years of experience
Deliver laser machine equipment in a timely manner.
- Maintain and operate laser machine in surgery rooms.
- Helping doctors complete operation at hand with patient.
- Knowing and understand the purpose and use of lasers for specific procedures.
- Prostate treatments with microwave therapy.
- Communicating and taking care of patients during microwave therapy procedure.
6-10 years of experience
- Worked closely with engineering to learn processes and complete work instructions to transition product from engineering to production.
- Performed critical passive and active alignments on solid state lasers.
- Performed routine preventive maintenance to ensure that systems operate efficiently.
- Provided technical assistance to engineering, production and inspection personnel in the safe and efficient handling of class 4 lasers in a class 100 clean room.
- Followed standards and procedures to maintain safe work environment.
- Informed essential personnel of job status and material needs as well as any material discrepancies.
- Performed delicate rework of high dollar laser’s resulting in quick turnaround and substantial monetary savings.
6-10 years of experience
- Build, test, and alignment of Electro-Optical devices
- Environmental stress testing
- Write detailed failure reports and troubleshooting
- Follow production pipeline to meet production schedule
- Assist program engineers in procedure and product changes when applicable
Rate This Article
[Laser Technician]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
