- Featured in:
-
More Lathe Operator Resumes
Use these Lathe Operator samples as a guideline or visit our extensive library of customizable good resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Metal Work Resume Samples
Lathe Operator Resume Samples
No results found
0-5 years of experience
- Responsible for data entry of polyurethane rolls to include fields of Roll thickness, calibration of surface roughness and calculating speed settings to determine grade of roll cut.
- Managed the set up of rolls to be cut in lathe by using remote controlled crane lift.
- Performed procedures which included using precision instruments such as two micron RA meter, wheel vibration and weight distribution meter.
- Accountable for preparing daily reports to include roll availability for production.
- Preventative maintenance and troubleshooting of machines to include ensuring cleanliness of equipment and general housekeeping of machines.
0-5 years of experience
CNC Lathe set up’s (HAAS ST-30, Doosan puma 240, Doosan puma 2100SY, Doosan lynx 220)
- Able to schedule jobs to machines based upon machine capabilities.
- Extensive knowledge of turning Plastics & Alloys
- Knowledge of speed and feed rates with alloys & polymers
- Measuring and inspecting ASI 9001 & ASI 9002 aerospace finished parts
- Able to read and complete setup with Blue Print/ MIR/ MOT/ Traveler
- Very good understanding of G & M codes
- Can make the proper program edits to achieve correct dimensions
- Proficient with inspection tools
0-5 years of experience
CNC Operator Dept.
- Basic program, setup, and operate two CNC lathe machine (2 axis).
- Perform adjustments, work offsets, and geometry offsets.
- Inspect parts in optical comparator.
- Work on Miyano, Traub, and Hardinge lathe machines (2 axis).
6-10 years of experience
Responsible for setting up, changing blades, CAD programming, reading blue prints, and completing jobs.
- Responsible to set up spindle head for the finger joint machine, measure and cut boards down to correct size, glued finger joints together for clean boards.
- Responsible to cut boards to size to use in assigned jobs.
- Responsible for general cleaning and maintenance of work area.
6-10 years of experience
Tested, set-up calibrated and troubleshot down tools.
- Set-up the analog and digital controller (Willow Controller).
- Installed software and set-up configuration.
- Ran/set-up wires/cables.
- Set-up & schedule plans for daily. (CNC)
- Software and hardware installation.
- Fix/repair/troubleshoot and develop many different for electrical types
- Trained in Microsoft Office and Windows XP, 95, 98, 2000 and ME.
0-5 years of experience
- Learned the basics of CNC machining on HAAS equipment.
- Gained and understanding of Engineering blueprint requirements and tolerances including quality control standards and material certifications.
- Worked on parts that required maintaining tolerances of +/-0.0001
- Able to work efficiently with inspection tools including, calipers, micrometers, bore gauges, and thread gauges.
- Maintained more than one machining centers at once (HAAS SL 30 Lathe and HAAS SL 20 Lathe)
- Increased my familiarity with cutting Jaws for specific job operations.
- Setup and prepared specialized tooling including, boring bars, insert drills, end mills, carbide/regular steel drills, and taps.
- Setup and prepared tooling using C-Axis or Live Tooling such as drills, taps, and milling heads.
6-10 years of experience
CNC Machinist
- Test part integrity
- Perform machine operations to meet dimensional and tolerance standards
- Conducted quality inspection of components
- Performed maintenance machining.
- Painting
6-10 years of experience
- Edit, setup and operate CNC Horizontal Mori Seiki and Takisawa Lathe
- Maintain clean, neat, and organized work area
- Keep equipment running smoothly with routine maintenance
- Pick stock during high-volume operational times to satisfy customer orders
- Follow regulations, safety guidelines, and company procedures at all times
- Management department when supervisor is absent or away.
10+ years of experience
- Set up and operate CNC Lathe
- Edit programs as needed to produce acceptable workpiece
- Inspect part using precision gages
- Performed duties as Lead man for 5 years
- Worked in Assembly department for 18 months
0-5 years of experience
- Required the use of part drawings, fairly complicated math, entering tool offsets in the controls, and understand movements of the tool relative to the tape program.
- Understand the function and operation of both NC machines and conventional equipment.
- Trained to use precision instruments such as Scales, Calipers, Micrometers, Depth Micrometers, Tri Micrometers, etc.
0-5 years of experience
- Turning grooves into automotive pistons.
- 100% visual inspection for quality adjusting CNC as necessary.
- On feet most of shift working overtime regularly.
0-5 years of experience
- Inspect sample workpieces to verify conformance with specifications, and tooling gauges, micrometers, and dial indicators.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions and to determine material requirements and operational sequences.
- Adjust machine controls and change tool settings in order to keep the dimensions within specified tolerances.
- Move controls to set cutting speeds and depths and feed rate, and position tools in relation to workpieces.
- Select cutting tools and tooling instructions, according to written specification or knowledge of metal properties and shop mathematics.
- Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure the specified timing, clearances, and tolerances.
- Lift metal stock or workpieces manually, and position and secure them in machines using fasteners and hand tools.
- Replace worn tools and sharpen dull cutting tools and dies using bench grinders or cutting-grinding machines.
0-5 years of experience
- Responsible for setting up machine
- Responsible for reading blueprints
- Provided parts machined to blueprint specifications
- Responsible for checking parts & deburring
- Provided maintenance on CNC machine
0-5 years of experience
- Gauge parts an visually inspect parts
- Fill out all paperwork for job process
- Check and change tools as needed
- Keep are clean and organized
- Put parts in correct flow area
- Daily check sheets
6-10 years of experience
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Remove and replace dull cutting tools.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Listen to machines during operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Stop machines to remove finished workpieces, or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Lift workpieces to machines manually, or with hoists or cranes.
- Insert control instructions into machine control units to start operation.
0-5 years of experience
- Read blueprints to determine measurements for parts
- Measure parts with micrometer and calipers
- Repair assigned machines as needed
0-5 years of experience
- Blaster/ CNC
- Operate CNC lathe
- Perform machine setups on all CNC equipment
- Ensure productivity and efficiency
- Edit machine programming
- Check and adjust depths of tools
- Ability to read blue prints
0-5 years of experience
- CNC
- Set up CNC Swiss Lathe to manufacture products used in medical fields
- Maintain quality throughout the manufacturing process
0-5 years of experience
- Set up
- OD, ID & Grooves
- Download Programs
Lathe Operator Duties and Responsibilities
Specific job duties for lathe operators vary based on their employer. However, there are several core tasks common to all lathe operators, such as:
Prepare Lathes for Operation Before they start the manufacturing process, lathe operators prepare the machines to process the raw materials. To prepare machines, lathe operators adjust specific settings, such as height and width.
Prepare Materials for Fabrication Lathe operators prepare the raw materials for parts manufacturing. This includes ensuring the materials used are the right size. Lathe operators look at blueprints and parts plans to ensure the correct materials are being used.
Operate the Lathe After the machine and materials have been prepared for fabrication, lathe operators run the lathe and other machines in a safe and efficient manner. They are responsible for the proper operation of the machine so parts are manufactured correctly.
Perform Quality Control on Finished Parts Lathe operators perform quality control inspections on all parts and components they fabricate. This includes comparing the finished parts to blueprints and other plans. If parts don’t meet quality standards, lathe operators typically need to re-manufacture them.
Oversee Routine Maintenance Lathe operators are responsible for maintaining all the lathes and other industrial machines they operate. This includes monitoring the lathe’s performance to ensure it is operating properly. If the lathe operator finds any problems with their machines, they are responsible for scheduling maintenance.
Lathe Operator Education and Training
Successful lathe operators have at least a high school diploma or GED. Candidates who have further education in machining are typically hired over those who don’t. Some employers may also look for candidates who have certifications in lathe machining, such as the National Institute for Metalworking Skills (NIMS) certification.
Lathe Operator Salary and Outlook
According to the Bureau of Labor Statistics (BLS), lathe operators make a median annual salary of $41,700, listed under the category of machinists and tool and die makers. Lathe operators who make the most money in their field can earn as much as $62,000 per year. Those on the lower end of earnings make as little as $25,900 per year. Lathe operators are typically awarded a benefits package from their employers. These benefits usually include health insurance -including dental and vision coverage – along with vacation and sick time. The BLS reports that lathe operators in this category can expect to experience an employment growth of about 2 percent through 2026. Advances in technology and machinery automation may be why this growth rate is lower than average.
Helpful Resources
Check out the following helpful resources to learn more about lathe machinists and the overall machining industry:
American Machinist Metalworking Network – if you’re looking for like-minded professionals, check out this LinkedIn group. Made up of machinists including lathe operators, this group gives you the unique opportunity to network and learn more about the field with a welcoming forum for asking and answering questions
Practical Machinist – this is a forum website where you can connect with lathe operators and other machinists from around the world. The unique forum approach allows you to communicate in real time with professionals who can help answer questions or discuss the latest advancements in the industry
Machinery’s Handbook – this book is often touted as the most popular reference book for machinists to have been written in the last 100 years. It contains a wealth of information that you can keep on your person for quick reference and information
Blueprint Reading for the Machine Trades – lathe operators often need to look at blueprints, and this book can help you build this essential skill. It covers a wide variety of topics, from visualization to multiview drawings, among other topics
Metal Work Cover Letter Examples
Rate This Article
[Lathe Operator]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
