- Featured in:
-
More Welder Helper Resumes
Use these Welder Helper samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Metal Work Resume Samples
Welder Helper Resume Samples
No results found
0-5 years of experience
Performed a large range of manual activities including moving equipment, digging, retrieving equipment, standing by for fire safety, and any other work instructed by a supervisor or a journeyman
- Use fire extinguisher.
- Climb on to structures and Scaffolding.
- Uses rigging and hoisting devices such as chokers, chain falls and come alongs to move equipment / materials into place
- Conducts preventative maintenance such as lubrication and fixing or repairing worn parts.
- Follows direction from supervisor
- Acts as an apprentice to lead welder
0-5 years of experience
Assisted on the Piping preheating and running internal clamps
- Assisted a welder on a tie in crew and made many welds on the creek crossings
- Assisted the environmental foreman and helped build water filtration for run off waters
- Also assisted welders in the fabrication yard building flanges, tube turns with certain degree angels.
0-5 years of experience
Assisted welder by tack-welding, grinding and gouging.
- Lifted, moved, and held or clamped work pieces to table or into position as needed by welder.
- Cleaned work pieces to remove impurities using wire brush, portable grinder, hand scraper.
- Determining amount of materials, identifying appropriate construction locations and transporting scaffolding materials.
- Know basic math and be able to follow instructions. Many scaffold builders are carpenters who have learned their skills on the job, and they may hold a special certification in scaffold building.
- Close proximity to power tools, exposed wiring and other hazards make the job much more dangerous than many other occupations.
0-5 years of experience
Performed a large range of manual activities including moving equipment, digging, retrieving equipment, standing by for fire safety, and any other work instructed by a supervisor or a journeyman
- Use fire extinguisher.
- Climb on to structures and Scaffolding.
- Uses rigging and hoisting devices such as chokers, chain falls and come alongs to move equipment / materials into place
- Conducts preventative maintenance such as lubrication and fixing or repairing worn parts.
- Follows direction from supervisor
- Acts as an apprentice to lead welder
0-5 years of experience
Prevented fire hazards in the workplace while work is performed by welders
- Ensured work areas were cleaned and orderly.
- Assisted welders and fitters.
- Responsible to inspect entire work area for potential release of flammable vapors.
- Read work orders or receive instructions from supervisors.
- Responsible for using various power tools for preparation of interiors, and exteriors of ships.
0-5 years of experience
Assisted welders in turning on, setting-up and adjustment of welding machine
- Gathered all tools for the job
- Assisted in hoisting welding cables
- Assisted pipe fitter in inspection of pipe and piping system to assess their quality condition
0-5 years of experience
Cut Steel Plates and tubes to specific angles as required
- Cut, fitted, grinded, connected, and installed a variety of piping for commercial
- Cleaned, Burned, and retubed boilers
- Piping hot /cold water lines throughout the boiler system
- Removed rough spots from work piece, using portable grinder, hand file, or scraper
0-5 years of experience
Moves work pieces, tools and supplies manually and by hand truck; connects hoses from torches to fuel gas cylinders.
- Connects hoses from torches to fuel gas cylinders.
- Removes, tags, marks and moves finished work.
- Cleans work pieces to remove slag and rust with portable grinder and wire brush.
0-5 years of experience
Performed duties under the supervision of lead Contracted Welder
- Assisted welders in cutting, welding and fitting of pipe for battery and compressor locations
- Understand basic functionary systems for petroleum/natural gas
- Moved heavy tools, work pieces, and supplies
- Cleaned work area
0-5 years of experience
Learned of basic welding concepts and their applications.
- Expert in moving work pieces and tools manually and with equipment.
- Hands on experience in performing grinding tasks using both power and hand tools.
- Proficient in cleaning work pieces to remove impurities.
- Well versed in reading and interpreting blue prints.
0-5 years of experience
Assisted Lead Welder by repairing broken and cracked parts.
- Positioned and clamped fabricated metal products together to prepare for welding.
- Operated shears, press brakes, sandblaster and other equipment.
- Moved products throughout the warehouse with forklift.
- Used tape measure, to accurately measure metal for cutting and welding.
0-5 years of experience
Operated safety equipment and exercised safe work habits
- Examined work pieces for defects; measured work pieces with tools to ensure the conformed to specifications
- Recognized, set up, and operated hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment
- Welded components in flat, vertical, or overhead positions
- Selected and installed torches, torch tips, and filler rods according to welding chart specifications or types and thicknesses of metals
- Effectively and safely operate hydraulic sidebooms utilizing machine specific controls and machine attachments to complete all necessary tasks related to pipeline construction. This includes operating on adverse terrain, in winter conditions, and/or near other equipment and power lines
- Utilizes Sideboom in crowded, fast-paced working environments, and exercises extreme caution with awareness of potential situational hazards to ensure site safety.
- Interpret verbal and non-verbal communication (including hand signals) from operators, ground personal and swampers, and act accordingly
- Perform mechanical inspections and servicing including sideboom controls and operation, completing log books, preform maintenance and adjustments, ensure good housekeeping, and preform machine lubrication
- Perform effective operation of equipment by recognizing unusual machine movements and sounds
- Recognize existing and potential hazards and know how to identify these through conducting a field level pre-job hazard analysis, checking the machine for hazards and assessing any tasks before start
0-5 years of experience
Helper to all welders, Fitters and Iron Workers
- Maintenance Crew: Lay-Out, Fabricated and Re-Installment Pipe Supports.
- Utilized Cutting torch, Band Saws, Skill Saws, etc.
- Followed all [company name] Construction Policy & Safety procedures
- Helper to all welders, Fitters and Iron Workers
- On going maintenance crew: Lay out, Fabricated and Tacked.
- Utilized Cutting torch, Band Saws, Skill Saws, etc.
- Followed all LPR Construction Policy & Safety procedures
0-5 years of experience
- Assisting with pipeline welding using primarily stick welds.
- Providing welder with the proper tools needed upon request.
- Adjusting the heat settings on the machine when instructed to.
- Preparing and maintaining our location of work.
- Keeping the machine, truck and equipment clean at all times.
- Driving large trucks and hauling trailers to job locations.
0-5 years of experience
Comprehensive knowledge of inventory control and warehouse operations
- Able to answer phones, check in drivers and order follow up â— Knowledge of Radar Gun Scanning systems
- Picked orders in a fast manner for shipment as well as Will Call clients
- Thorough understanding of operating forklift trucks
- Good written and verbal communication skills
- Knowledge of processing shipments by means of database
- SAP systems certified
- Assisted Welder during various projects
- Scan international, local and national mail from conveyour belt
- Build correct flights, load cargo in timely manner to prepare for delivery
- Work at efficient pace to always reach deadline
0-5 years of experience
Assist in preparation for welding which includes machine set up stick welding tig and flux cord.
- Preparing the surfaces prior to welding.
- Building containments (5xxx welding)
- Followed standards and procedures to maintain safe work environment.
- Fixing the structural foundation according to blue prints.
- Stocking incoming orders onto shelves.
- Proper packing, labeling and tagging of the inventory in the warehouse.
- Operate and maintain preventively warehouse vehicles and equipment’s.
- Packing merchandise for shipments.
0-5 years of experience
Stick Welding; assist lead welder in every aspect
- Weld Pipe Fence
- Fabricate Reinforced Concrete Walls
- Weld components in flat, vertical or horizontal positions.
0-5 years of experience
Assist is set up of welding equipment.
- Assist in preparation of material for welding by cutting or grinding.
- Use pipe cutting torch or hand tool.
- Set material in stands racks hoist, etc for welding.
- Pull measurements cut bevel pipe.
- Fitted for welder
- Assist in the repairing of pipe.
0-5 years of experience
- Demonstrated ability to perform under stressful conditions
- Became knowldgeable about buffing and grinding beads
- Complimented by my boss on my dependability
0-5 years of experience
Learned different kinds of welding including Stick, Mig, Tig, and Flux Core
- Assisted welders in brazing, thermal and arc cutting, and welding
- Moved heavy tools, work pieces, and supplies
- Cleaned work area
0-5 years of experience
- Help welder out and bend sheet metal and tack together.
- Help weld sheet metal alongside welder
- Prime and paint final products
Metal Work Cover Letter Examples
Rate This Article
[Welder Helper]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
