- Featured in:
-
More Welding Supervisor Resumes
Use these Welding Supervisor samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Metal Work Resume Samples
Welding Supervisor Resume Samples
No results found
10+ years of experience
Planned, organized, and supervised 15 personnel in performing tasks necessary for fabrication, installation and repair to 1000 ft. of shipboard piping, plumbing, and structural members saving the U.S. Navy $10,000 in depot level repairs.
- Experienced in brazing, electrical arc welding, oxyacetylene welding and cutting, plasma arc cutting, and MIG/TIG welding processes.
- Managed 15 shipboard personnel in preventive and corrective maintenance of shipboard sewage piping and equipment while maintaining 100% operational readiness for shipboard personnel.
- Conducted over a 2000 hours in gas-free inspections and testing of voids, tanks, and compartments to ensure safe for personnel entry and hot work operations with ZERO discrepancies.
- Trained 350 shipboard personnel in firefighting methods enabling them to combat fires, flooding, and structural damage which improved ship survivability.
0-5 years of experience
Started the weld department for start-up company and trained in Japan for welding procedures and company culture.
- Lead team of ASME welders in all areas of production.
- Lead, mentored, and trained members in areas of Safety, Quality, Production, and Kaizen to increase efficiency and reduce production times and costs.
- Calculated and reported negative and positive production hours to account for production flow and delays.
- Established Standard Operation Procedures for the welding department.
- Investigated quality issues and issued Non-Conformance Reports as necessary in order to prevent repeat issues.
- Calculated direct and indirect time in order to report accurate cost of product.
0-5 years of experience
Started the weld department for start-up company and trained in Japan for welding procedures and company culture.
- Lead team of ASME welders in all areas of production.
- Lead, mentored, and trained members in areas of Safety, Quality, Production, and Kaizen to increase efficiency and reduce production times and costs.
- Calculated and reported negative and positive production hours to account for production flow and delays.
- Established Standard Operation Procedures for the welding department.
- Investigated quality issues and issued Non-Conformance Reports as necessary in order to prevent repeat issues.
- Calculated direct and indirect time in order to report accurate cost of product.
0-5 years of experience
Supervised and trained 49 Sailors in 6 job fields from 7 departments in atmospheric testing requirements. As the Maintenance material manager, led 120 staff members in 10 work centers in task and qualification completion.
- Completed over 100 level one quality assurance packages and over 200 formal work packages expending 10,000 man hours.
- Led 179 workers in organizing 2 indoctrination classes for newly promoted workers and mentored 89 junior personnel in leadership skills and in community service responsibilities.
- Trained and qualified 35 atmospheric testing administrators and assistants in direct support of the ship’s repair department.
- Managed and directed 45 sailors in the repairs of various jobs onboard naval ships and submarines utilizing all methods and techniques of welding.
- Meticulously managed and coordinated 500 atmospheric testing evolutions, enabling all welding and confined space entries to be accomplished safely and incident free.
- Assembled and directed a 9 personnel pre-planning team to Yokosuka, Japan. Completed over 80 quality assurance, pre-job planning evaluations with efforts enabling a highly successful shipyard repair availability period with minimal deficiencies.
- Facilitated a leadership continuum course for over 20 newly promoted staff members.
- Developed and implemented a highly successful plan to improve ship material condition of readiness for conversion to Military Sealift operations resulting in a savings of in outside contractors’ costs.
0-5 years of experience
Completed inspection documentation, procedures and reports, and updated computerized management system as required
- Developed and implemented welding inspection procedures.Established techniques for proper examination of mechanical welds under inspection, ensuring strict adherence to specifications
- Evaluated supplier quality system and managed and developed programs to meet our customer requirements
- Performed incoming and final inspection of products to meet customer requirements including inspection of specified base metal and welded finished products
- Liaised with customers to clarify the specifications and expectations
6-10 years of experience
Requesting equipment and supplies maintaining inventory and ensuring availability of required items
- Supervising up to 5 employees, tracking performance, evaluating their proficiency and offering guidance & support for their professional growth to increase performance
- Planning and managing projects; preparing and maintaining accurate records; and adhering to safety practices
- Assembling complex Micro Brewing machines by reading detailed blueprints to determine how parts should connect, properly aligning and connecting them with bolts and screws, finally welding all the pieces together
- Providing direction to new and current welders, performing general maintenance activities, structural fabrication, installation and repair
- Implemented various organizational procedures in the office and on the work floor to increase productivity and to better utilize the resources, tools & equipment
- Researched updates to compliance standards and executed various workplace safety procedures
10+ years of experience
Increased effectiveness of military personnel to respond in emergency deployment through training and cross-training in the fundamentals of welding and heavy equipment repairs.
- Supervised metal fabrication shop and coordinated work flow with job orders.
- Developed and conducted training classes for 20 students per month.
- Retired Vietnam veteran, E-7 NCO Platoon Sergeant/Educational Instructor.
0-5 years of experience
Oversaw and coordinated 10 welders in the fabrication of heavy equipment
- Oversaw production to the adherence parts were in tolerance and acceptable quality standards
- Increased production and reduce shop down time by implementing the latest technology
- Improved existing procedures and enhanced QC processes while establishing an open communication between welders and management
- Contributed to management to include hiring, shift scheduling, training, team building and disparity issues
0-5 years of experience
Trained and lead 3 welders in welding, brazing, and thermal and arc cutting.
- Completed over 200 critical welding work orders resulting in mission success.
- Reviewed, documented and evaluated welding procedures, processes and systems to validate compliance with policies, guidelines and best practices.
- Determined needed equipment, tools and welding methods for each welding project.
0-5 years of experience
Production welding supervisor for crew of 28 employees, point of contact for all associates regarding scheduling and shipping requirements.
- Established and maintained schedule requirements of production machinery
- Trained associates on machinery and safety regulations
- Assigned job duties and developed associates for advancement
- Provided praise and disciplines of associates.
6-10 years of experience
Supervised up to 12 employees and oversaw jobsite safety and productivity
- Operated a welding truck in rail yards throughout the United States
- Coordinated projects with railroad supervisors and engineers
- Maintained and utilized a 3000 PSI Hydraulic PTO and welder head and system; a 2009 Volvo HD 3500 diesel truck; a 6500 LB Russian designed flash-butt welding system; electro hydraulic valves and sensors
- Worked with and completed troubleshooting for computer software and electronics hardware
6-10 years of experience
Supervised groups ranging from 15 – 30 men, ensuring the crews produced top quality work.
- Responsible for major and new fabricating work
- Consulted with the Engineering Department on designs concerning the fabrication process
- Assisted in the scheduling of jobs, ensuring all deadlines were met
- Cleared parts for the next job prior to them completing the previous job
- Managed inventory associated with welding and repair parts for MIG guns
- Referred to, and became familiar with Microsoft Excel, and Solid Edge computer programs
- Operated various pieces of equipment including;: fork lifts, overhead cranes, plasma cutters, torches, shears, and the carbon arc torch.
10+ years of experience
Supervised refurbishments on numerous rebuilds and 16 new builds of 1500 HP Drilling Rigs
- I have supervised up to 100 welders/fabricators on different jobs.
- Supervised on-site employees and equipment ensuring constant production. Maintained on-going communication with Project Manager regarding concerns or observations.
- Carried out daily on-site supervision, ensuring work met job codes and safety regulations.
- Conducted safety training – resulting in increased employee productivity; enhancing team’s ability to identify, isolate and eliminate work hazards.
- Played major role in ensuring integrity of multi-million dollar oilfield equipment – avoiding downtime; maintained visual aspects of site; promote cleanliness and neatness; enhance safety of crew.
0-5 years of experience
Supervised welding department (20 welders) to ensure the weekly/month production schedule were met or exceed
- Lead the ASME Welding Certification Process (Personally held 7 welding certifications)
- Responsible for in-house and outsourcing of Quality Assurance of all welds per the ASME standard
- Developed the weekly/month production schedule
6-10 years of experience
- Introduced welding method that saved [company name] 50% of production costs on all MIG welding projects and reduced material waste
- Managed regulatory compliance and recordkeeping for Nuclear Regulatory Commission projects
- Fabricated and welded industrial combustion burners for Pillard USA
- Fabricated and welded power plant turbine components for Asia Brown Boveri Ltd.
- Fabricated R&D piping and skids for DuPont
0-5 years of experience
- Supervised over $1.5M worth equipment.
- Supervised all welding and machinist operations.
- Operated truck tractors with flatbed and box trailers.
- Performed preventive maintenance checks and services on all equipment.
- Ensured adherence to proper safety procedures and safe operations of all facilities.
0-5 years of experience
- Managed all aspects of the welding department including hiring, purchasing, and contracting
- Created and implemented welding procedures for production welders/personnel
- Created welding programs and ops procedures for robotic welding
- Responsible for quality control, automatic plasma cutting, forming, prototype design and more
Metal Work Cover Letter Examples
Rate This Article
[Welding Supervisor]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
