- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Mining Resume Samples
Field Operator Resume Samples
No results found
6-10 years of experience
Served as Crew Leader in charge of checking motors and Dehys as well as supervising and scheduling crew of 4
- Performed day-to-day operations of testing and managing 4 wells and maintaining production facilities
- Drained tanks and prepared for oil pickup; ensured accuracy of gauges, and checked rates on pump
- Obtained before and after samples of pipeline contamination and utilized Smart Pigs and Foam Pigs on 8-inch to 24-inch pipelines
- Checked and replaced O-rings on Check Valve; maintained and replaced valves as needed
- Prepared and submitted daily reports of produced volumes of oil, gas, and water
- Complied with all regulatory, environmental, and safety rules and standards, as well as company policies throughout tenure
0-5 years of experience
Supply adequate information for 80 miles of natural gas pipeline+
- Line Pressure at various points including TCO feed, input and output pressures and adjustments to 441 and 461 regulators
- Provided Leak survey, Line patrol, Cathodics reads, Line surveillance, Line locating and Producer chart reads
- Completed leak order, line exposure, odorant level tests, line survey, rectifier inspection, cathodic read inspection reports as required by PUCO
- 2013 promoted to Spelman Pipeline
0-5 years of experience
Responsible for testing and assembling downhole survey equipment, and coordinate with directional driller and personnel to ensure project objectives are met.
- Timely and accurate completion of all daily job status reports and job site incident reports
- Participate in the analysis and interpretation of well site data
- Successfully managed the MWD department of three turnkey rigs concurrently
- Part of the first team responsible for operation of new MWD tool. Authored the tool’s
0-5 years of experience
Operated Pressure Pump equipment to perform hydraulic fracturing, including sand machine, acid, and hydration equipment, during pump stages.
- Maximized well efficiency through operation of particulate silicone and proppant units, delivering hundreds of thousands pounds of various sand densities.
- Operated, calibrated and maintained all fracturing equipment daily, ensuring effective operation for job assignments.
- Completed all rig ups and rig downs, including suction and discharge hoses, verifying preparedness for fracturing stages.
- Monitored work hours on pumps by gathering truck and trailer reports during and between fracturing stages.
- Operated chemical blending units, ensuring achievement of proper weight to density distribution per customer specifications.
- Achieved maximum perforation of hydrocarbon veins for gas extraction by transferring acid treatment solution down wellheads.
- Repaired or replaced pump parts on FMC pump units and pump manifold units on well site in between stages, eliminating any shutdown during stages.
0-5 years of experience
Promoted to supervisor after demonstrating capabilities, hard work and commitment to the company.
- Trained new crew members on daily operations and safety standards.
- Actively participated in preventative maintenance activities and equipment inspections on the field.
- Performed other jobs as needed such as Water Transfer and Service Tech duties.
- Consistently recognized for outstanding performance; frequently put in additional time and effort to get the job done.
- Maintained a clean and safe environment.
- Worked with flame cutting equipment and hand welding techniques.
- Utilized tools to cut metals into frames as per designs.
- Prepared production reports and other paperwork.
0-5 years of experience
Lease Operating Duties
- Was promoted to relief operators after 4 months of employment
- Helped train 3 operators and given continuous support
- Familiar with multiple Gas Leases
0-5 years of experience
Operated winch unit for running in/out of well
- Prepared well for service operations
- Performed maintenance checks of tools and assigned equipment
- Operated various vehicles including Kenworth and Peterbilts.
- Traveled to well locations throughout Oklahoma, Texas and Kansas
- Operated all vehicles safely in compliance with DOT and company policies
6-10 years of experience
Daily interaction with management and safety personnel to insure job safety, scheduling and quality.
- Assisted with the training of new hire’s.
- Managed all job related paperwork.
- Operated equipment and tools like: wall saws, flat saws, hand saws and core drill’s.
0-5 years of experience
Worked as equipment operator facilitating pumping cement into annulus of oil and gas wells under high pressure.
- Involved in rigging up, connecting hoses, and high pressure iron to equipment, supporting pumping of Cement into the well.
- Maintained inspection reports and required log books, ensuring compliance with DOT regulations.
- Made pre and post-trip inspections, fueled, and serviced units, guaranteeing equipment maintenance.
- Assigned equipment and performed daily inspections, ensuring compliance with operational and safety requirements.
- Operated equipment in accordance with company procedures, completing all tasks safely and efficiently.
- Followed-up on proper rig up procedures, providing safe equipment operation and job performance.
- Reported operational deficiencies to supervisor and maintenance personnel, ensuring timely maintenance of equipment and preventing potential injuries.
- Performed equipment inspection and maintenance as requested, completing required paperwork and ensuring work was performed per appropriate guidelines.
0-5 years of experience
Monitor data quality and interpret MWD/LWD surveys, formation responses and drilling mechanics
- Operate and maintain MWD/LWD surface systems and down hole tools at rig site
- Interpret down hole data and liaise with directional drillers and geologists
- Generate daily and final well reports on service performance
- Experience in Eagle Ford, Barnett, and Haynesville shale formations
- Promoted to Lead within first 3 months
0-5 years of experience
Water Transfer, Heating and Chemical Treatment of water
- Maintain all workshops, ensuring all equipments are parts were organized, in working condition
- Service all mechanical equipment, parts, manifold, CAT machines, and work tanks
- Rig Up/Tear Down/Run Water Depots, Frac locations, Heater trucks, Transfer equipment
- Fuse 8″ to 10″ Polyethylene pipe
- Direct crew and trucks safely on/off locations
- Able to work 24 hour shifts, or longer in any and all weather conditions until job is complete.
0-5 years of experience
Formed Commercial Grade Gutters and Downspouts
- Operated Fork-Lift and Tractor
- Inspected and Repaired Commercial Rooftops
- Installed and Maintained Solar Panel Assemblies
0-5 years of experience
Driving Class A Vehicle. Keeping accurate records for DOT compliance, maintenance of Job Safety Analysis and other safety records, ability to write concise reports for BBSM, attention to detail, remaining current on all safety certificates as well as DOT requirements, good writing skills.
- Assist in rigging up and rigging down wireline equipment.
- Assist in tool string make up.
- Drive logging vehicle to location when required.
- Compliance with all DOT reporting requirements
- Available on a 24 hour basis to respond to customer needs and work long hours when required.
0-5 years of experience
Provide trouble shooting assistance with equipment and daily operations.
- Make sure all scheduled task are completed accurately and on time.
- Maintain consistent compliance (zero violations) in the workplace.
- Continually monitor operations to enable early detection and action of equipment problems.
0-5 years of experience
Assist main operator with many task requirements.
- Performed production, monitoring wells, and flow vac.
- Traveled between different job sites as required and stayed long periods, if necessary.
- Monitored open top fluid levels and sand content.
- Monitored all pumping wells and ensured its proper functioning
- Examined proper lubrication and functioning of pumps and mechanical equipment.
- Ensured timely reparation of equipment.
- Performed equipment and vehicle cleanliness and maintenance when required.
0-5 years of experience
Travels to international assignment locations to perform work assignments.
- Knowledge of pumping surface equipment and chemicals.
- Competent with volumetric and composition calculations.
- Comprehensive knowledge of monitoring equipment as related to fluid pumping services product line and the operation and maintenance of the equipment.
- Knowledge of communication satellites and data transferring equipment.
- Surface cementing equipment encompasses and accommodates plug-dropping heads, cementing heads, ball-dropping subs, flag subs, swivels, pump-down plugs and setting balls that efficiently handle high hook loads, torques and pump pressures.
0-5 years of experience
Adjust controls to regulate temperature, pressure, feed, or flow of liquids or gases and times of prescribed reactions, according to knowledge of equipment and processes
- Observe safety precautions to prevent fires or explosions
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained
- Control or operate equipment in which chemical changes or reactions take place during the processing of industrial or consumer products
- Measure, weigh, and mix chemical ingredients, according to specifications
0-5 years of experience
Rig-in and rig-out cement equipment at service locations
- Monitor machine operations to detect malfunctions; report or resolve problems
- Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/report
- Operation of the following: cement pumping and mixing equipment, centrifugal pumps, bulk cement blending, and storage systems, and manifold equipment
- Handles bulk cement and various oilfield chemicals
- Frequent bending, twisting, and standing
- Exposure to working outdoors in all weather conditions (hot, cold, dust, dirt, noise)
0-5 years of experience
Proficient in running most aspects of a fracturing job.
- Responsible for mentoring new employees and making sure they are familiar with company’s safety standards.
- Delivers fracking supplies to and from the company to the job site.
- Responsible for pre-trip inspections.
- Maintains an accurate log book.
- Stays up to date with rules and regulations for multiple states.
- Operates yard diesel powered fork lifts and smaller warehouse forklifts.
6-10 years of experience
Carries out field operation of the all section in DCU and heavy rotating machines under the guidance of General Operator.
- Regular communication with Panel Operator, inspecting and monitoring of various equipment, executing the start-up, shutdown of rotating and static equipment, furnaces, exchangers etc., hand-over equipment for maintenance and taking over from maintenance after repair.
- Reports to Shift Supervisor and receives instructions from Shift Supervisor about operation conditions.
- Works in accordance with in established operating procedures, and work instructions.
- Fills log books and log sheets.
- On assigned shift carries out a variety of duties to maintain the efficient and safe running of fractionator section. Includes starting up and shutting down plant following set procedures, commissioning equipment, by-passing control valves for maintenance and repair, checking that working conditions are safe for maintenance to be carried out and carrying out various duties related to fractionator operation and production processes.
- Lubricating pumps, adjust fan coolers according to operation requirements, add chemicals, takes routine samples for laboratory and the other routine activities.
0-5 years of experience
Responsible for setting appointments and scheduling meetings with potential clients.
- Responsible for maintaining and updating business portfolio.
- Build and maintain business relationships.
- Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies.
- Use of Microsoft Word, Windows, Excel, Office, Outlook, Powerpoint, Quickbooks, Access.
0-5 years of experience
Perform routine preventive maintenance to ensure proper operation of tools and equipment
- Follow industry standards and procedures to maintain a safe working environment
- Collaborated with work crews to ensure smooth work flow and efficient operations
- Promote shop safety by working in a safe manner
- Obtained extensive knowledge of wireline tools and operational procedures
- Quality control procedures for electric wireline tools and equipment
- Obtained all applicable certifications and licenses required to operate in the oilfield
- Attended weekly safety meetings to ensure a safe working mentality
10+ years of experience
Control activities of several processing units operated in conjunction on console.
- Patrols unit to verify safe and efficient operating conditions
- Determines malfunctioning units by observing control instruments, such as meters and gauges, or by automatic warning signals.
- Inspect equipment to determine location and nature of malfunction, such as leaks, breakages, and faulty valves.
- Work closely with interdepartmental staff and management to understand and prioritize business goals.
- Analyze day to day operations to recognize safety concerns and make conclusions/recommendations.
- Read temperature and pressure gauges and flowmeters, record readings, and compile operating records.
- Participated in several operational projects including major turnaround events
0-5 years of experience
Drive tractor trailer combinations to location in all weather conditions at all hours.
- Rig up equipment in a safe and efficient manner.
- Communicate with my coworkers as well as rig employees to complete operation in a safe manner
- Rig down equipment when project is completed.
- Follow company and rig rules and policies.
6-10 years of experience
Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered, and time required.
- MWD Lead Gamma and D&I hand, measurement while drilling
- Operate or adjust equipment or apparatus used to obtain geological data.
- Set up or direct set-up of instruments used to collect geological data.
- Record readings in order to compile data used in prospecting for oil or gas.
- Create photographic recordings of information, using equipment.
- Diagnose or repair malfunctioning instruments or equipment, using manufacturers’ manuals and hand tools.
- Set up and operate MWD (measurement while drilling) tool to drill and land drilling string
0-5 years of experience
Maintained effective communication with field Managers
- Documented incident reports
- Preformed site inspections
- Maintained logbooks and inspection reports
- Preformed daily inspections to ensure compliance with operational and safety requirements
- Reported all operational deficiencies
- Performed equipment inspection and completed paperwork
- Ensured equipment was operated within accordance with company safety procedures
- Practice safe driving procedures when traveling to and from locations
- Participates in rigging up and connecting equipment
- Completed pre and post trip inspections plus fuels and services the units
0-5 years of experience
- Performed general field operators duties assigned by Baker Hughes.
- Keep up daily logs that had to be turned after each work day.
- Drove all equipment to each location and rigged up and fraced.
- Experienced Chem add operator for over 1 year.
- Experienced Sand runner and Acid operator for over 2 years.
0-5 years of experience
- Collaborate with water transfer companies and Schlumberger, Halliburton or Baker-Hughes FRAC teams to meet contract-specific guidelines while also following EPA and OSHA regulations.
- Navigate (lead field crew) to remote sites to supply ~$150K worth of biocide per well for 70 to 120 hours per week.
- Control, monitor and maintain chemical mixture ratios and concentration levels in the water sent into oil wells during the hydraulic fracturing process to kill sulfate-producing bacteria; lengthening the well’s lifespan.
- Troubleshoot and fix problems that arise with DIONIX water treatment equipment.
- Provide customer service to oil producer/contractor.
- Train technicians and new employees.
- Hydraulic fracturing water treatment/Chemical mixing
0-5 years of experience
Operate Company Service Truck
- Safety Committee member
- Perform work to meet customer’s safety and quality expectations
- Trained in the use of electric, gas, diesel, pneumatic, and hydraulic equipment (core drill, flat saw, hand saw, wall saw, and chain saw)
- Complete daily pre-task safety checklist
- Complete daily driver logs
0-5 years of experience
Under supervision, assists in assembly/disassembly of pumping units
- Perform installation, maintenance and inspection services on pumping units as required
- Fully knowledgeable of pumping unit components
- Fully knowledgeable of JSA process and overall awareness of field safety
- Operate a DOT vehicle fully following log book procedures and regulations.
- Mechanically inclined to perform all required services to pumping units.
0-5 years of experience
Aided in the manufacturing and production of vehicle fuel, diesel fuel, propane and Propylene
- Worked swing shift and on-call
- Completed Computer Based Trainings throughout employment
- Utilized Hi-lo to move materials
0-5 years of experience
Pressure tested tools
- Delivered jobs to on-land rigs and docks
- Loaded jobs for shipment to customers
- Demonstrated concern with customer satisfaction
- CDL Driver with air brakes endorsement
0-5 years of experience
Performed the daily operations of the business including
- Bookkeeping, customer service and field assignments.
- Functioned as primary contact for prospective clients
- Processed accounts payable and accounts receivable
- Prepared monthly billing and performed collection
- Prepared bank deposits; reconciled statements
- Composed correspondence; prepared letters and advertising materials
- Interacted with vendors and researched invoices to resolve discrepancies
- Maintained inventory control
- On-site field duty
0-5 years of experience
Operate and maintain remediation systems (including pumps and PLCs) on the P66 refinery site
- Issue safe work permits based on air quality tests and oversee contractors on remediation sites
- Operate, maintain, and calibrate instruments used for air quality control (Ultra Rae 3000, Jerome Hydrogen sulfide analyzer)
- Oversee the loading and transportation of liquids on remediation sites
- Prepare field logs and data/progress reports to demonstrate compliance with regulatory requirements
- Available for rotating call outs
- Extensive safety training
- Groundwater/Hydrocarbon sampling
- Site Safety Representative
- Conduct site safety audits/Participate in PSSR’s
0-5 years of experience
Monitor emergency frequencies to detect distress calls and respond by dispatching emergency equipment.
- Communicate with receiving operators to exchange transmission instructions.
- Operate radio equipment to communicate with ships, aircraft, mining crews, offshore oil rigs, logging camps and other remote operations.
- Broadcast weather reports and warnings.
- Maintain station logs of messages transmitted and received for activities such as flight testing and fire locations
- Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.
- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
- Bolt equipment into place, using hand or power tools.
- Test operation of tower transmission components, using sweep testing tools or software.
- Run appropriate power, ground, or coaxial cables.
0-5 years of experience
Prepare tool tickets for mechanic use
- Loaded truck in compliance with tool requests
- Answered phones
- Fulfilled job request with experienced personnel
- Provided customer service for clients
- Went out on job sites with crew
0-5 years of experience
Assisted the Field Engineer in successfully preparing and executing cased-hole wireline logging or perforating operation.
- Possesses class A CDL with Hazmat and Tanker endorsements.
- Capable of working long hours with little or no supervision.
- Capable of using Forklift and Man lift.
- Capable of rigging up and rigging down for wireline perforation and logging operations.
- Capable of assembling a gun train assembly
- Capable of redressing setting tools, quick change, firing heads and teardrops.
- Capable of re-heading a cable head.
- Capable of leading a team of operators to ensure quality service delivery.
0-5 years of experience
Maintain safe working environment throughout entire plant
- Repair and maintain equipment
- Heavy equipment operator (Frontend loader, bobcat, forklift, semi)
- Basic maintenance duties
- Train new employees
- Keep running report of all duties and repairs
0-5 years of experience
Perform preventative maintenance on equipment to ensure that assigned units are in safe and proper operating condition
- Operates [company name] equipment during jobs while monitoring equipment for potential mechanical failures
- Complete all required paperwork (Pre-job/Post-job Trip Tickets, load tickets, etc.) and submit in a timely manner
- Be attentive to changing conditions during jobs that may negatively impact the environment and inform the Stimulation Supervisor
- Manage daily fluid production; gauge and record oil and water tanks; record all seal records
- Act as a mentor for newer employees to motivate and teach them proper techniques in equipment operation
- Assist in maintaining cleanliness of job sites and work areas
- Complies with all [company name] Standards and Policies while exhibiting and promoting a culture of safety and service delivery
- Participates and contributes in all safety and service delivery programs individually and/or as a team member
6-10 years of experience
- Design and supply ArcPad for employees to have access to databases and navigation on the maps.
- Increase accuracy and individual safety by surveying pipeline and valve systems by mapping and databases.
- Create databases to link with gas lines, valves, sites, and/or meters in order to reveal the data records instantly.
- Understand the flow through the pipelines for isolation, pigging, purging, pressure and flow changes.
- Operate and understand the entire aspect of compressor stations including dehydration systems.
0-5 years of experience
Perform start up and shut down of gas compressors
- Perform detailed checks of compressors, pipeline, and locations
- Troubleshoot issues with compressors, pipeline, and locations
- Resolve issue with location equipment
- Perform pigging of the pipelines
- Complete line locates
0-5 years of experience
- Assist with ‘rig up’ and ‘rig down’ procedures at wellsite.
- Assist with regular maintenance of wireline tools.
- Gained experience on how to set up and operate setting and perforating tools used in ‘hydraulic fracturing’ process. Primarily worked with Baker20 setting tool.
- Assisted in well site operations to help company achieve goal, which was to fracture and plug well.
0-5 years of experience
Programmed and monitored down-hole telemetry acquisition tools.
- Troubleshot any/all MWD tool problems or failures.
- Processed and distributed MWD surveys to directional drillers, company men, and geologists.
- Operated positive pulse, APS, and electro-magnetic MWD tools.
- Worked in a safe manner, while using proper PPE and obeying all laws and regulations.
0-5 years of experience
Run VMT’s, hydration unit and Cyclone Blender
- Help onboard mechanic
- Train new hires to rig up and work the dock
- Prepare and test all types of chemicals for jobs
- Titrate acids, check viscosity on linear gel and crosslink gels
- Repair and fix high pressure iron chicksons, and valves
0-5 years of experience
Unload inbound shipments
- Prepare and stage skids for outbound shipments
- Move products to storage locations
- Stack and store merchandise in appropriate places
- Assist with picking and packing
- Perform preventive maintenance functions on forklifts
- Perform routine quality control and inventory functions
6-10 years of experience
- Worked with contractors out in the field cutting concrete, asphalt, and block.
- Handled phone calls and set jobs for contractors, along with setting daily jobs schedule for operators.
- Prepared daily reports of job activities for pricing, collection, and end of month close outs.
- Prepared payroll, accounts receivable, and accounts payable reports for the accounting manager.
- Worked with owner and managers in establishing new credit accounts.
0-5 years of experience
- Performed daily job site operations
- Responsible for site maintenance
- Assisted with preparation of hazardous waste for disposal
0-5 years of experience
Support Store Ops with supply runs to maintain current capacities and volume
- Work with all players in the system including: Store Employees, Store Managers
- Store Ops/Leads, Mission Control, Couriers, and Customers Service
- Operate forklift to load & unload materials
- Weekly inventory cycle counts
6-10 years of experience
- Properly Greeted Customers
- Provided Full Detail Auto Care
- Provided Full Detail Power External Home Washing upon request
- Inventory Duties and Full Provided Full Account of all Supply Logs
0-5 years of experience
- Performs regular routine check and inspection of the operating area and equipment to ensure that such are properly set-up, operated and that the required operating parameters, quality, output and safety conditions are maintained.
- Implements the operating procedures and instructions required for the effective control of target parameters in the individual operating units.
- Performs the regular sampling of in-process and finished product materials and submits such for proper quality determination as basis for effective process control.
- Performs regular field instrumentation readings and recording as required for effective monitoring and tracking of process conditions and makes the corresponding adjustments to meet desired quality and output conditions.
- Participate in monthly fire fighting drills as to secure plant emergency fire situations.