- Featured in:
-
More CNC Lathe Operator Resumes
Use these CNC Lathe Operator samples as a guideline or visit our extensive library of customizable good resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Production Resume Samples
CNC Lathe Operator Resume Samples
No results found
0-5 years of experience
Followed regulations, safety guidelines, and company procedures at all times.
- Produced machined couplings by operating computer CNC.
- Produced premium connections such as [company name] XP, Buttress thread [company name] blue, Wedge thread 563 and also the API thread.
- Maintained continuity among work shifts by documenting, communicating actions and irregularities with the machine and continuing needs.
- Documented production and quality logs, recording any product made that did not meet the required specifications.
- Analyzed, measured all controls for machine factors such as speed, coolant flow and assisted to identify all malfunctions in machines and ensure timely repair.
- Identified and replaced all dull cutting tools.
- Installed and secured all tools for attachment with help of various hand tools and measuring instrument.
10+ years of experience
Worked with management to guarantee that parts being machined met all quality standards of high profile customers such as General Motors, Harley Davidson, John Deere and CAT. Performed offsets and minor editing on CNC machining equipment in addition to preventative maintenance. Responsible for maintaining in-process and end of line operations which included final inspection of parts per SPC using micrometers, calipers, surface analyzer, optical comparator as well as other automotive manufacturing metrology, then recorded data in the event files needed to be accessed at a later date for verification. Strived to reach goals such as zero defects and 100% on time deliveries. Conformed to all safety and environmental regulations set forth for manufacturing.
- Trained new and seasoned associates on machine operation, gauging, scanning and quality procedures.
- Intricate role in ensuring that shipments were completed within allotted time to minimize dock time.
- Dedicated to continuous improvement and consistent commitment to quality.
0-5 years of experience
Setup and operated Mazak Turning Center for manufacturing oil field sucker rods on an assembly line
- Change tooling and programs according to task at hand
- Ran test parts and adjusted parameters to hold tolerances to make good threads
- Edited some programming as needed to ensure good parts
- Performed 100% visual inspection as well as quality inspection using calipers, micrometers, snap, go/no go, and thread gauges throughout the day
- Crated inspected rods
- Moved crates using overhead cranes to paint tank
- Painted rods and stacked crates for shipment
- Served on safety committee for six months
6-10 years of experience
General care and maintenance of CNC Mill and lathe units including Puma, Brothers, Daewoo, Excels, and various other brands.
- Production of steel and aluminum auto parts to nominal specifications according to approved blueprints.
- Performing required gaging with air gages, calipers, snap gages, micrometers and others, as well as visually inspecting for non-conforming material or cuts.
- Light janitorial duties.
- Training of new employees.
- Ensuring adherence to strict environmental procedures and OSHA guidelines.
10+ years of experience
An experienced CNC lathe operator with excellent knowledge of Mazak CNC machines and highly knowledgeable with Mazatrol and Conversational programming. Formerly Chicago Steel Tape, (CST/Berger Corporation), acquired by Stanely Works in 2007. Then ultimately acquired by [company name] Tool Corporation in 2008. A world wide leader in the design, manufacturing and sale of a wide range of high quality tools. This subsidery of [company name], designed, produced, and shipped industrial surveying equipment all over the world, supporting a fully equipped CNC machine shop.
- Write and edit programs from blue prints and drawings
- The ability to interpret and adhere to blue print specifications and requirements.
- Set up machines, knowledgeable with all types of tools, including, but not all, turning, threading, boring and drills.
- The ability to maintain and make minor repairs to machines
- The knowledge and understanding of various machinery associated with machine shop environment, such as, drill presses, grinders, manual lathes, and mills.
- Excellent knowledge of Mazatrol controls and programming
10+ years of experience
Operated CNC vertical lathes in a safe and efficient manner to produce production parts to specifications
- Performed all aspects of turning from raw material to finished piece
- Reading blue prints
- Tool set-up
- Fixture set-up
- Quality inspection
- Trained newly hired employees and cross trained current employees with varying levels of experience
- Completed proper paperwork to maintain an effective quality assurance system for the company and maintain ISO Certification
0-5 years of experience
Measured dimensions of finished work to check quality using precision measuring instruments, templates, and fixtures
- Mounted, installed, aligned, and secured tools, using hand tools
- Lifted work pieces to machines manually or with hoists or cranes
- Inserted control instructions into machine control units to start operation
6-10 years of experience
Followed set up procedures for the Okuma CNC lathe machines
- Operated the machines and completion of orders for aircraft components and other small parts according to customer blueprints and standards.
- Worked with metals such as stainless Steel, titanium, Inconel, and aluminum
- Inspected and measured all machined parts according to prints and standards
0-5 years of experience
Perform set ups including: Selecting and installing proper chuck jaws and tools (boring bars, drills, roughers, finishers, groovers, threaders), blueprint interpretation, loading proper program into machine, verifying program will run properly
- Complete first article inspections to ensure initial part is within specified tolerances
- Adjust feed rates, spindle speeds and offsets when necessary
- Deburr and inspect parts in a timely manner to maintain proper finish and quality
- Maintain cleanliness of machine and work area and ensure proper fluid levels
- Complete work orders and file job travelers
- Provide suggestions/process changes to optimize efficiency
0-5 years of experience
Preform machine setup ups, read blueprints and edit programs.
- Load tools, change inserts as well as check and adjust tool offsets.
- Use mathematical formulas to figure speeds and feeds and to ensure product is on size.
- Use precision instruments to ensure close tolerances (to the tenths) and stencil finished products.
- Perform tasks efficiently within deadlines.
0-5 years of experience
Operate Fanuc Controlled CNC lathe
- Experience on Doosan 220, Doosan 300 lathes
- Experience using and setting precision tools such as calipers, o.d. mics, bore gage, etc.
- Experience reading blue prints, measurements fractions or decimals
- Ability to make some lights edits to program so the machine can perform.
- Ability to do set ups, knowledge of different materials and different cutting tools.
0-5 years of experience
This is a machine where it has to have correct measurements in order to have the parts coming out to satisfactory.
- Measure each part with a tool called, gage in order to satisfy the factory needs.
- Have ran several machines in this factory, believe they are all considered CNC Machines but they all perform different job assignments.
- In my short period of time I have train several new employees.
- Change the inserts, which are knifes for the machines that are used to cut the product.
0-5 years of experience
- Performed basic program modification to keep parts in tolerance
- Followed written procedure for machine operation
- Inspected finished parts for defects and used precision measuring devices to ensure tolerances were held
- Used precision measuring devices including, calipers, outside micrometers, three point bore micrometers, blade micrometers, height gages, and dial indicators
- Used computer, machine control, and set up sheets to compile information to make future set ups more efficient
- Performed preventative maintenance on machines that I operated
6-10 years of experience
Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data
- Calculates and sets controls to regulate machining factors such as spindle speed, feed, and machining time cycle
- Verifies and compensates conformance of finished work-piece to specifications
- Ability to upload and download programs to machine control
- Performs other duties that are assigned
- Able to function within a team environment
- Responsible in maintaining the required
- Specs /dimensions of the product
0-5 years of experience
Ability to use precision measuring equipment to judge quality of work such as microscopes, micrometers, air gages, electronic gages, and dial indicators
- Responsible for quality and quantity of work produced by machine. Analyze machine problems and take corrective action
- Strong communication skills
- Ability to read blueprints
- Capable of efficient set up and change over Also manual lathe and milling exp.
6-10 years of experience
Verify proper part identification, color, and quality of prior processes using ISO procedures.
- Determine if parts meets requirements for machine operation or requires rework.
- Determine if there is an existing program for part.
- If no program exists create one using CMM and CAD software.
- Load part, verify program and proceed with machining process.
- Make program edits until machine process is completed.
- Measure part dimensions and record readings on ISO production document.
- Determine whether part passes quality guidelines and either write a rework ticket or pass part and deliver to next line process.
0-5 years of experience
Set-Up, operate, maintain, edit program as needed and troubleshoot 2 CNC Funuc control lathes, perform quality checks, tool changes and offsets as needed to maintain part specs
- Incorporating a 5S program to organize the shop.
- Did all scheduling and customer relations.
- Maintained shop equipment by generating a PM program.
0-5 years of experience
Comprehend blue print and quality control instruction to verify part GDT
- Proficiently operate both single and multi spindle machines
- Responsible for part quality and CNC lathe maintenance
- Operated two CNC lathe machines meeting quality and production goals
- Utilized test equipment: optical comparator, caliper, micrometer, height stand, dial indicator, go and no gauges, thread gauges and pitch micrometer
0-5 years of experience
Precision turning, boring, and grooving.
- Set up machine to perform multiple operations.
- Indicated parts in lathe to within .001 or less.
- Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances.
- Experience with overhead cranes.
0-5 years of experience
Responsible for setting up and operating CNC lathes (Mazak & MoriSeki)
- Program machine to make parts according to blueprint
- Inspect parts according to print
- Schedule workload on machine using Pull System or Kanban
- Inspect parts using either Cordax or Zeiss measuring systems
- ISO9000, ISO9001 and PQA90 certified in machining department
0-5 years of experience
- Operated three CNC lathes simultaneously with minimal supervision.
- Made offset adjustments and/or tool changes.
- Monitor tool life.
- Fill out production sheets and all production related documents as required.
- Monitor SPC/quality document.
- Communicated with quality inspector to consistently meet customer’s quality standards.
0-5 years of experience
- Fabricated parts from various metals
- Utilized CNC Okuma Captain L-370 Lathe, Okuma 4 VA Mill, CNC Okuma L B 9 Lathe Okuma 4020 Mill, Clausing Model 5914 Horizontal Manual Lathe, Reid Model 2C Surface Grinder, Rockwell Drill Press and Amada HA 250W Automatic Saw
- Checked measurements and recalibrated computer as necessary
- Drove forklift as needed
- Checked shipping manifests to receive stock from delivery trucks
- Moved recyclable scrap into and out of storage
Rate This Article
CNC Lathe Operator
Last edited by: Gabriela Barcenas, CONTENT STRATEGIST -
Gabriela Barcenas
CONTENT STRATEGISTGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
