- Featured in:
-
More Manufacturing Assembler Resumes
Use these Manufacturing Assembler samples as a guideline or visit our extensive library of customizable good resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Production Resume Samples
Manufacturing Assembler Resume Samples
No results found
6-10 years of experience
Handled prep, assembly, soldering, rework, and test various printed circuit boards.
- Promoted to quality inspection group and performed at 98% quality assurance level.
- Completed quality improvement course, and implemented a quality system in the work place resulting in less rework after audit of each printed circuit board.
- Audited components after assembly process with a defect-free production rate of 99% while correcting mistakes before assembly.
- Built 12-16 PCB units from start to finish with no defaults or failures in make ready for test.
0-5 years of experience
- Informed engineers of the possible cause of defects, which improved machine and process efficiency.
- Managed, established and maintained pre-test and burn-in test using defined acceptance criteria. The records provided objective evidence that the units have been tested and clearly show whether the units have passed or failed.
- Facilitated training of a prototype work system focusing on interchangeable tasks for each team member, resulting in broader skill sets, improved communication, and increased process knowledge.
0-5 years of experience
Lead a team of Assemblers installing a custom Shape Memory Alloy (SMA) Wire Assembly in the OmniPod Insulin Management System.
- Trained employees for all aspects of installation and inspection of mechanisms.
- Supported the development of manufacturing equipment at the domestic facility and at a contract automation equipment designer facility.
- Drafted validation protocols and reports for the implementation of custom manufacturing equipment.
0-5 years of experience
- Assembled probe heads for a sub assembly on test equipment and in multiple arrays of layouts.
- Ensured planarity and alignment are within specified assembly tolerances and customer specs.
- Interpreted engineering documents, deviation specs, and implementation of new processes.
- Provided technician support to trouble shoot and resolve technical problems.
0-5 years of experience
Resolved assembly problems by altering dimensions to meet specifications
- Maintained supply inventory by checking stock to determine inventory level
- Conserved resources by using equipment and supplies as needed to accomplish job results
- Tested and monitored product performance and quality
0-5 years of experience
Made and assembled catheters on three different product lines.
- Followed diagrams and written instructions to build quality products.
- Met or exceeded production goals while producing high quality work.
- Trained to work on various lines because of ability to learn new procedures quickly.
- Excelled in a production team environment, especially in training associates on proper General Manufacturing Practices (GMPs).
0-5 years of experience
Installed protective devices, such as bracing, padding, or strapping, to prevent shift
- Recorded inspection or test data, such as weights, temperature, grades, or moisture content, and quantities inspected or graded
- Cleaned parts, using cleaning solutions, air hoses, and cloths
- Recorded numbers of units handled or moved, using daily production sheets or work tickets
- Examined and inspected stock items for wear or defects, reporting any damage to supervisors
- Measured parts to determine tolerances, used precision measuring instruments such as micrometers and calipers
0-5 years of experience
Performed and assisted in the assembly of vascular closure devices (4Fr, 6/7Fr) from start to end.
Process includes: Bonding with various adhesives, heat applications, mechanical and pneumatic fixtures. Responsible for packaging and shipping final product to the sterilizer facility.
- Visually inspect and measure final assemblies in process.
- Issued TRV’s (device history records) and responsible for reviewing TRV’s of operators to ensure proper completion
- Adhere to manufacturing procedures, company policies, ISO guidelines and FDA regulations.
- Trained new employees on the “manufacturing process instructions” (MPI’s).
- Responsible for daily cycle count of material.
- Laid out and set up productions lines for CER (Controlled Environment Room).
0-5 years of experience
Performs SMT, PTH, and complete assembly of circuit board products, C02 canisters, various gun laser assemblies, taser assemblies, and cable assemblies.
- Involved in aligning laser items using cameras and various computer equipment.
- Responsible of warranty rework on circuit board assemblies and laser products.
- Tests and measures assemblies, end items, and components using calipers and micrometers and other instruments.
- Works closely with supervisors, co-workers, and technicians on product and paperwork changes and upgrades.
- Inspects work for defects, as well as final inspection.
0-5 years of experience
Ensured efficient operation of case forming, case packing, labeling and all other downstream equipment
- Performed package quality checks as required
- Complied with all standard safety practices, safety rules, and all Company rules and policies
- Maintained accurate records and logs as required
- Worked directly with maintenance personnel, other line personnel and management to problem-solve to ensure maximum production efficiencies
- Set up and/or changed over equipment to different package sizes or different case codes
- Maintained proper safety conditions of equipment including immediately correcting or reporting safety issues to supervisor
0-5 years of experience
Complete the process for final production
- Cross function environment from one machine to other
- Completed tasks to meet datelines to meet the company needs and fulfill accurately and precisely
- Completed 200 to 400 products in one service line to meet the high demands to go into the next machine
0-5 years of experience
Responsible for production of 400 – 500 radiation badges daily.
- Organize and label badges in different stages to be processed.
- Use scanner to keep accurate records for inventory of badges
- Maintain machine calibration to ensure all tests pass before reading of badges.
- Inspect badges before sending to customer
- Maintain accurate and complete log of tests performed on machine.
0-5 years of experience
- Assisted with stiffness and tensile testing of catheters for quality assurance
- Performed alphanumeric data entry/data collected from products’ testing into Excel
- Reviewed documentations for accuracy and completeness
- Scanned/copied/filed paperwork for reference purposes
- Operated eraser cut and core pulling machines
- Performed quality inspection on various types of catheters
- Trained employees in various operations
10+ years of experience
Performs a wide variety of electronic and mechanical assembly operations of Sony Vaio laptop computers and ensures product conforms to customer expectations.
- Trains new employees on notebook/laptop (VAIO) assembly processes.
- Utilizes assembly instructions/procedure, drawing, process specification using electric assembly tools.
- Ensures all specifications and procedures are followed and quality is achieved efficiently.
- Rotates throughout the entire assembly line and packaging area as needed.
- Inspects assemblies and sub assemblies to ensure compliance, that product specifications are met.
- Actively participates in the Quality Improvement System.
0-5 years of experience
Assembled mechanical and electrical components to specifications interpreted through blueprint schematics
- Checked products electrically using standard measuring tools to ensure safety and accuracy
- Evaluated products for repair and reconditioning
- Utilized various hand soldering techniques including surface mount (SMT) and through-hole on a variety of components
0-5 years of experience
- Assembled Plastic and metal components into medical devices.
- Utilized small hand tools, calibrated instruments, measurement equipment, microscopes, and test fixtures.
- Performed in-process quality inspections on sub-assemblies and finished products.
0-5 years of experience
Assemble medical devices to meet manufacturing production schedule. Certified in key operations with expertise in device assembly and packaging procedures.
- Assemble and package medical devices in the quantity required while maintaining focus on safety, quality and compliance.
- Maintain training to critical operations while training and certifying other operators.
- Report nonconformance to quality control.
- Provide management with information on line performance and issues.
0-5 years of experience
- Soldered and assembled electronic PCB’s.
- Produced backplane PCB’s using automated equipment.
- Minimal shipping and receiving responsibilities.
0-5 years of experience
Review work orders and blueprints to ensure work are performed according to specifications.
- Complete production reports to communicate team production level to management.
- Determine work assignments and procedures.
- Maintain production equipment and machinery
6-10 years of experience
- Accountable for product and process quality and required documentation in a clean room environment
- Contributed to team coordination and communication in resolving quality and production issues
- Ability to read and understand manufacturing procedures including assembly prints and engineering drawings
- Apply computer applications when necessary to perform assembly functions
- Assisted Engineering in the development and implementation of new products
0-5 years of experience
Handles micro parts under the microscope with accuracy and precision
- Perform pebax tubing/threading by threading bifilar wires into microtube using fine needles
- Perform in process inspection using snap gauge and tappi charts
- Perform pull test in pouches using Instron machines
- Packaging product using sealer machines
0-5 years of experience
Use machinery to wind large amounts of wire into mold
- Mix epoxy using various chemicals and dry components
- Ensure proper fill and baking of components while monitoring vacuum, pressure and temperature
- Breakout finished component from mold and prepare it for the next station
- Constant improvement of area. Responsible for several key efficiency improvements
- Fill out proper paperwork for all work and tests conducted
- Proficient in other areas of the factory as required
- Train new workers to high standards
0-5 years of experience
Assembling & soldering catheters into medical devices.
- Performed in-process quality checks on sub-assemblies and finished product.
- Utilized small hand tools, calibrated instruments, measurement equipment, microscopes and test fixtures.
- Maintain cleanroom integrity via proper gowning techniques and adherence to cleanroom environment practices (QSR/GMP) procedures.
0-5 years of experience
Piece together the different parts of manufactured product.
- Read detailed blueprints to learn how to assemble a product.
- Use hand tools or machines to complete the project.
- Use power tools such as soldering irons, power drills and install or fasten parts with bolts, screws or rivets.
0-5 years of experience
- Assemble desktop and laptop computers within a progressive build manufacturing line
- Assemble laptop computers within an individual cell line build
- Inspect computers for manufacturing defects prior to software download
- Test computers for audio visual and functionality performance using quality specifications
- Build sub-assemblies for progressive build line (LCD’s, hard/optical drives, and touch pads/fingerprint readers)
- Provide engineers with information on needed BOM changes, material updates, and part issues during builds
6-10 years of experience
- Performed electrical and mechanical assembly operations
- Repaired and reworked faulty electronic components
- Solder touch-up and rework operator
0-5 years of experience
- Assembled desktop and Laptop computers within progressive build in manufacturing line.
- Built sub-assemblies for hard/optical drives
- Media built scan parts onto work order for assurance of correct parts.
- Connect cables onto mother board, tied wrap cables together per procedures.
- Used battery operated screw driver for screwing the heat sink onto mother board.
- Prep parts by applying labels to heat sink, inserting hard drives onto case with cables.
- Screwing optical drive onto chassis.
0-5 years of experience
- Assisted workers in fabricating, assembling, installing, and processing materials for aircraft and aerospace products.
- Sorted and counted parts and materials
- Examined parts and materials for defects
- Loaded and unloaded racks, baskets, skids, dollies and conveyors
- Filed, trimmed, sawed, buffed, drilled and deburred parts, using hand tools and power tools
- Lubricated and cleaned parts, assemblies and equipment
- Placed, positioned, clamped, and held parts and materials during assembly, installation, and machining
- Structured and maintained a clean work place
0-5 years of experience
- Pull medical research materials from storage based on customer
- Track inventory in by inputting products used for each kit in business transactions system.
- Received radioactivity training to safetly handle radioactive materials.
Rate This Article
Manufacturing Assembler
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
