- Featured in:
-
More Pipe Welder Resumes
Use these Pipe Welder samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Production Resume Samples
Pipe Welder Resume Samples
No results found
0-5 years of experience
Demonstrated excellent communication skills with staff, managers, and clients
- Demonstrated ability to troubleshoot creatively, solve problems effectively, and make informed decisions while successfully guiding others through constant change
- Served as a Pipe Welder with Short Arc Experience.
- Assembled structural units together such as lube oil systems.
0-5 years of experience
Completing Required paperwork to Authorize Work Start, (PSI’s-Pre-Job Safety Instructions, PXP Hotwork PCL Hotwork)
- Welding 2in/3in pipe, making sure root is nice and clean as well as the hot pass, and cap, to have a perfect weld
- Knowledgeable in Welding Rig Material and Material Used by Welder, (wire feed, Squares, Levels, etc and Reading of tape Measure)
- Rolling Out Equipment- Jack Stands, Grinders, Buffer, Connecting Extension Cords, Welding Leads, and Measuring Equipment
- Grinding, Buffing Measuring and Cutting 2″ and 6″ Pipe, “Install” 6″ Expansion Loops to pipeline, Prefabricating 6″ schedule 40 and schedule 80 Expansion loops (Grinding out Slag, Pin-Holes and Starters, Continuous housekeeping in process)
- Firewatch- Maintaining Fuel in Water Buffalo, Flagging Down Water truck Driver to fill up Water Buffalo, Continuous 100ft Radius Area Wet Down every 15-30 min with Water Buffalo hose Maintaining Welds by grinding and buffing out dingle berries, slag, under cut, cold lap, and underfill.
- Knowledgeable in translating some project blueprints
- Welding out vessels, generators, stainless steel vessels, skids inside and out to perfection, and welding out 2’/3′ pipe.
0-5 years of experience
- Performed pipe and valve repairs based on approved plans.
- Interpreted isometric and orthographic drawings to perform welding.
- Clamped, cut and assembled pipe components before welding.
- Performed welding according to specific codes.
- Evaluated installed piping systems based on specifications.
6-10 years of experience
- Learned the process and procedures of the American Welding Society
- Worked and interacted with the pipe fitters to achieve the common goal for quality
- Achieved multiple awards for excellent performance
- Constructed and modified piping systems
- Read and interpreted all drawings and schematics affiliated with the job
- Certified to weld carbon steel, copper nickel, and stainless steel in all positions (6G) and restricted (GTAW)
0-5 years of experience
Repaired pipe for water filtration plant, leakage control, Quality Control test for pipe X-Ray
- Maintain the necessary vendor certifications and continue to stay abreast of mechanical bulletins and other updates.
- Demonstrate flexibility and efficient time management, as well as the ability to prioritize workload.
- Communicate effectively with supervisors, management, employees and clients.
- Complete tasks in a timely and professional manner to achieve company and departmental objectives.
0-5 years of experience
Performed pipe repairs based on approved plans
- Executed installation procedures and systems
- Performed pre-welding tasks such as clamping, cutting and assembly
- Assembled and selected pipe welding materials and tools
0-5 years of experience
Responsible for welding stainless steel pipe and carbon steel pipe according to the welding procedure specification.
- 6G and rollout certified stainless steel and carbon steel from .5in to 40in 100% XRAY.
- Responsible for following all safety guidelines and procedures when in the jobsite and operating heavy equipment such as overhead cranes, forklifts, and man-lifts.
- Responsible for proper surface preparation of structure, piping and bases prior to paint
- Apply Zinc based and Epoxy primers on to metal surfaces prior to finish coating using
0-5 years of experience
Perform an array of welds on a daily basis including open root butt welds, socket welds, fill it welds, t-joints, structural welding, slip on flanges, jacketed piping and underground pipe.
- All welding skills apply to all positions with x-ray quality.
- Experience welding and pipefitting all types of exotic metals including carbon steel, stainless, inconel, chrome, and different types of alloy.
- Able to understand and read isometric drawings and doing layout.
- Cut, prep, bevel, and fit up pipe.
- Able to perform basic maintenance mechanic work including pulling and installing blinds from “-36”, bolt up, rigging, hot bolting, dollar plates, exchanger heads, plot edge blinds, and tower isolation.
0-5 years of experience
Fabrication/welder on high pressure pig launchers & receivers.
- Weld components in flat, vertical, or overhead positions.
- Operate safety equipment and use safe work habits.
- Lay out, position, align, and secure parts and assemblies prior to assembly, using combination squares, calipers, and rulers.
- Examine work pieces for defects and measure work pieces with templates to ensure conformance with specifications.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Every butt weld was 100% x-ray.
0-5 years of experience
- 100% X-Ray Welder on the ground in jack stands, Carbon Steel TIG and SMAW
- 100% X-Ray Welder in position welds in lifts with 100% tie-offs, and in confined spaces
- Performed routine monthly inspections and maintenance on equipment and tools
- Worked four to five 70-hour workweeks consecutively.
- During leave-time from Piedmont Mechanical, I spent time volunteering assistance to pipe-welding students at West Georgia Technical College, providing hands-on demonstrations of repairs and enhanced weld quality that meets industry standards.
0-5 years of experience
- Able to productively welding various sizes of pipe ranging from ” to 64″
- Knowledgeable and successful in the process of Tig/GTAW welding on stainless steel and natural gas piping
- Capable of welding carbon steel with 6010 root and 7018 filler and cap proficiently
- Worked with fitter to confirm measurements and drawings before fabrication and installation, filled in for fitter as needed
0-5 years of experience
Pipe Fit/Welded (Stick, Mig and Tig) steam ,braking and air systems for locomotives.
- Welded light, heavy gauge metals (stainless, inconel, aluminum, galvanized and also carbon.) Pipe and also Duct Work
- Welded using 6010, 7024 8018 rods, Mig Hardwire .35 and .45 wire
- Fabricated and Assembled locomotives from blueprints and drawings
- Ran electrical wiring and electrical components through the locomotive.
10+ years of experience
Welded stainless steel tubing in the food service industry
- Welded steam lines, refrigeration/ammonia lines
- Completed blue prints as well as read blue prints and performed pipe fitting duties
- Performed welding inspection duties
0-5 years of experience
- Heavywall Combonation pipe welder. (TIG and stick, stainless and carbon, code B31-1)
- Worked with cranes, off road equipment, threading machines, grinders and all hand tools.
- Promoted to leadman/ lead welder.
- Assisted foreman with job scope.
0-5 years of experience
Performed Stick welding and TIG welding as required in order completing assigned task
- Welding ammonia pipe for frozen storage food and dairy product
- Using 6010 for the root of the pipe and 7018 for the fill and cap of the pipe
- Using TIG welding to rooted and hot pass on carbon and some stainless steel
- the pipe size 3/4in to 12in
- help build the world largest frozen storage warehouse richland, Washington
- Welding in high level like 135ft of the ground 10 hour day 6 day of week in cold, icy, and snow weather, and also in hot weather
- certified to operating boom lift, and scissor lift complete my assigned task
- use a mirror to see in smell places to complete my assigned task
0-5 years of experience
- Worked at [company name] making hydrogen plants
- Performed x-ray gtaw pipe welds to boilermaker requirements
- Tig welded stainless and carbon steel pipe on a daily basis using variety of different diameters ranging from 1/4″up to 12″, and schedule from 10 up to 160.
- In charge of fiting up my own pipe by using an isometric blueprint
0-5 years of experience
Performed welding according to specific codes.
- Operational knowledge of hand and power tools.
- Selected materials and equipment required for pipe welding.
- Promoted safe work practices.
0-5 years of experience
- Pipe fit and weld pipe.
- Inspected, maintain, diagnose, and repaired dupp presses as well as other machinery in the plant.
- Changed out hydraulic cylinders, 480 high voltage AC/DC motors, gear boxes, and augers.
- Assist other mechanics in getting a large work order done and preventive maintenance.
- Weld harden shafts.
- Coordinate with the supervisor on work orders.
- Performed preventive maintenance on dupp presses.
- Modified and repaired hydraulic chokes and press cages.
0-5 years of experience
- Certified welder on natural gas lines
- Surpassed weld inch Quota
- Lead welder and ran crew
- Worked with Blue prints and did revisions
- Started job two months late and completed job three months before deadline.
- Perfect Safety record
0-5 years of experience
Reading and Understanding Blueprints.
- Fitting Pipe to dimensions on Blueprints. Includes Flanges, Reducers or Valves.
- Welding Pipe to Pass X-Rays.
- Ability to consistently pass X-rays or dye penetrant.
- Inspecting root inside the pipe as well as outside.
- Cutting and fixing any pipe spool that needs to be shortened or lengthened depending on how it fits in assembly.
6-10 years of experience
Reefer piping, sch 40 stainless (tig) with purge, sanitary/food grade piping on several processing vessels and plants. Carbon and stainless boiler tubes, stick and tig. Lots of copper-nickle pipe welding exp, with purge.
- I also worked for various other companies during this time while I was laid off from Industrial Resources, Inc. 3 months 7-12’s in Seward Alaska with Carl Burgland and Fluid Dynamics, redoing piping on a drydocked tug boat. Also did one month of 7-14’s at the Wheelabrator boiler in Spokane Wa, welding boiler tubes (tig) in the super heaters and generator banks.
- Various refer piping jobs with Rooster and Red-Line welding stainless (tig) with purge.
- Worked a bridge job for Harcon, Inc, in Courdelene, Id. Welded bridge pilings with
0-5 years of experience
Fit and weld pipe in the Big Lake location and on the North Slope.
- Fabbed various pipe spools ranging from any type of duplex and stainless and various types of carbon.
- Build modules for various companies on the North Slope.
- Help install explosion proof building on North Star Island.
0-5 years of experience
Stick weld on pipe rack extensions, all diameter pipes
- All welding positions
- Downhill / uphill welds
- Consistent root bead with 6010, 7018 and 8010G
- Reading blueprints
- Flux core MIG welder on all custom fabrication
- Custom fabricate walkway grating expansions, pump skids, pump station platforms, etc.
0-5 years of experience
- Perform electrode arc welding, flux core, oxyacetylene cutting in flat, vertical and overhead positions
- Install threaded valves, steam traps, strainers, pipe and/or fittings, and gaskets on steam distribution systems
- Adjust controls for polarity, voltage and amperage for welding equipment
- Select size and type of electrodes or welding rods for type of weld
- Weld pipes Schedule 40 and Schedule 80 from 1″ to 18″ in strictly confined spaces
- Set-up, operate, use attachments, and maintain metal machinery
- Perform safety prevention and detection
- Inspect and repair installed equipment
0-5 years of experience
- Pipewelder for Navy shipyard repair
- Welding copper nickel / stainless steel/ copper / aluminum/steel and much more steel materials.
- Walking the cup tig welding
- Stick welding / mig/ flux/ Tig with my own rig.
- Mirror welder in difficult confined spaces .
- PCP procedures and regulations prior to welding
0-5 years of experience
Construction of largest natural gas generating plant in the world.
- Combo Pipe Welder, small bore and heavy wall.
- GTAW, SMAW, 9 Chrome and chrome equivalent.
- Diesel and boiler steam lines.
- Confined space training
- Certified to operate man lift(JLG) & scissor lift
- Supervise blueprint and layout pipe rigging design
0-5 years of experience
- Welding of piping systems that had to be x-rayed to include high pressure steam, glycol and chilled water just to name a few.
- Assisting pipe fitter in the fit up of pipes to be welded
- Welding of piping supports to include structural welding.
- Assist in the installation of large pieces of equipment.
0-5 years of experience
Weld pipe according to mine specifications (uphill with 6010 and 7018)
- Bull rigging in pipes
- Welding at certain heights using man lifts and scaffolds
- Installing Victaulic pipes from 4″ to 36″
- Welding pipe supports and dummy legs
- Installing screw pipes
- 1″ socket welds for air line
- Welding uphill 6010 and 7018
- Using GTAW process
0-5 years of experience
CHS Refinery in Luarel MT than in their shop in Missouri
- Receive work order and acquire permits
- Setup work area
- Work on heat exchangers and inside pressure vessels
- Acquire PPE for alky confined space entry
- Select procedure and filler material for welds to perform
- Weld carbon, stainless, and monell
- Weld to B31.3 and section 9 and API1104 codes
- Obtain Montana state safety council card
Pipe Welder Duties and Responsibilities
In all types of work environments, pipe welders are required to perform specific tasks for any industry that employs them:
Construct and Repair Piping Systems A traditional aspect of this position is maintaining piping systems, so pipe welders install and build pipe hangers, valves, and supports.
Follow Safety Regulations Pipe welders must be aware of and adhere to all safety regulations. This includes wearing the proper protective clothing and following OSHA guidelines.
Perform Pre-Welding Preparations Prior to assembly, pipe welders clamp and cut piping and apply primers to metallic surfaces.
Examine Finished Welds Pipe welders examine finished work to ensure that it is smooth, free of defects, and high-functioning.
Repair Holes and Damage In addition to installing structures, pipe welders fill holes, seams, and indentations in metal to keep it structurally sound.
Inspect Equipment They also inspect and repair all the equipment and tools they use while performing their job.
Operate Machinery and Equipment Pipe welders operate heavy machinery and construction equipment, such as forklifts, cranes, and manlifts.
Pipe Welder Skills and Qualifications
Pipe welders are detail-oriented laborers who work with their hands to construct and maintain piping systems of all sorts. Employers seek out potential hires who have prior experience in pipe welding and construction in addition to exhibiting the following skills:
- Troubleshooting – Pipe welders examine piping systems and welding equipment for potential problems, which requires good troubleshooting skills
- Physical Strength – Because they work in a variety of environments and must perform their jobs from many positions, people in this career have the strength to lift and carry heavy equipment and the ability to work while laying down, crouching, or elevated
- Critical Thinking – Pipe welders know how to interpret blueprints, schematics, and detailed drawings to accurately assemble complex structures
- Time Management – Pipe welders work in construction environments and on projects with very strict timetables, so these professionals must have good time management skills to complete tasks quickly and without error
- Communication – As pipe welders talk frequently with other construction workers and supervisors in high risk job sites, they employ strong verbal communication skills to ensure accuracy and safety
- Mathematical Skills – This position entails adjusting the length of metal as needed, so pipe welders use math skills to calculate dimensions and trim piping with precision
Pipe Welder Education and Training
Pipe welders need to have a high school diploma or GED, and employers hire those who have former pipe welding experience and/or welding training. Some companies may require pipe welders to have a Certified Welder certification. This is a program administered by the American Welding Society, which has testing locations all over the country and the world. The exam tests applicant aptitude in welding structural steel, sheet metal, and pipelines. Additionally, companies may require applicants to have an OSHA-10 certification. This is a 10-hour course administered through OSHA that provides training in basic labor safety protocols. Some employers will also administer their own welding test to determine a potential employee’s welding proficiency.
Pipe Welder Salary and Outlook
Based on national data, the Bureau of Labor Statistics (BLS) shows that pipe welders, categorized as “Welders, Cutters, Solderers, and Brazers” earned $39,390 in 2016 as a median salary, or $18.94 per hour. Comparatively, PayScale data shows that pipe welders earn a median hourly pay wage of $23.23. Professionals in this trade traditionally receive a complete insurance benefits package that includes health, retirement, dental, vision, and life. Companies also provide overtime pay for employees who exceed 40 hours in a single work week and sometimes offer regular yearly bonuses. In 2016, the BLS states that there were more than 400,000 jobs available for professional welders, cutters, solderers, and brazers. This number is expected to increase by 6 percent through the year 2026, which reflects the current job growth average in the US.
Helpful Resources
Discover career opportunities, educational resources, and professional pipe welding tips with these resources:
National Certified Pipe Welding Bureau (NCPWB) – This website contains safety training guides and videos, news, and technical guides of all types for pipe welders.
The Pipe Fitter’s and Pipe Welder’s Handbook, Revised Edition – Professional pipe welders use this book by Thomas W. Frankland as a reference tool for problem-solving, making complex calculations, and managing difficult pipe welding tasks.
American Welding Society (AWS) – Learn where to find advanced training courses, conferences, and other professional pipe welding opportunities through the AWS website.
The Ultimate Reference & Table Charts for Pipe & Steel for Pipefitters & Welders – Many of the charts and important data tables used by pipe welders are contained in this book, which includes information about the properties of specific metals such as steel, alloy, and reinforcing rebar.
Rate This Article
Pipe Welder
Last edited by: Gabriela Barcenas, CONTENT STRATEGIST -
Gabriela Barcenas
CONTENT STRATEGISTGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
