- Featured in:
-
More Wafer Fab Operator Resumes
Use these Wafer Fab Operator samples as a guideline or visit our extensive library of customizable resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Production Resume Samples
Wafer Fab Operator Resume Samples
No results found
0-5 years of experience
- Promoted to Cell Lead in short period of time, becoming skilled in multiple areas and forming close working relationship with management, technicians, engineers, process technicians, trainers and operators.
- Trained in processes within Fab 1, Fab 2 and all Fab operations, assisting with relieving areas with overwhelming flow issues and process flow concerns.
- Partnered with management and engineers to improve workflow and refine handling process. Assisted with training employees with wafer processes in numerous cell areas.
- Obtained flexible schedule and learned quickly, working all shifts and assisting company to push product through line as needed.
- Gained experience in photo (all layers), etch, de-tape/tape, grind, back metal, irradiation, front metal, diffusion, wafer handling, lead task, process technician process, minor tool PMs and repair tools in areas dealing with metal coating process and de-tape/tape.
0-5 years of experience
- Promoted to Cell Lead in short period of time, becoming skilled in multiple areas and forming close working relationship with management, technicians, engineers, process technicians, trainers and operators.
- Trained in processes within Fab 1, Fab 2 and all Fab operations, assisting with relieving areas with overwhelming flow issues and process flow concerns.
- Partnered with management and engineers to improve workflow and refine handling process. Assisted with training employees with wafer processes in numerous cell areas.
- Obtained flexible schedule and learned quickly, working all shifts and assisting company to push product through line as needed.
- Gained experience in photo (all layers), etch, de-tape/tape, grind, back metal, irradiation, front metal, diffusion, wafer handling, lead task, process technician process, minor tool PMs and repair tools in areas dealing with metal coating process and de-tape/tape.
0-5 years of experience
- Measured oxide thickness of wafers following spec procedures and recorded information.
- Operated various machines to maintain an efficient flow of product.
- Calibrated tools and performed line clearance per document procedures.
- Resolved problems and made routine recommendations.
0-5 years of experience
- Setup, monitored, and operated automated testing equipment.
- Identified tester issues through data analysis.
- Maintained good communication with team, engineers, and supervisors.
0-5 years of experience
Look over and measure parts with precision tools in order to make sure certain parts meet pre-determined quality and cosmetic standards.
- Worked in Final inspection.
- Meet production quotas.
- Kept track of the numbers of wafers that are scrapped due to product various errors.
- Process wafers through the manufacturing process on assigned/certified operations as described in the Manufacturing Process Instructions (MPI’s)
- Adhere to all wafer Fab safety and cleanroom policies and procedures
- Support continuous improvement activities for productivity and yield enhancement
- May work with engineering and other cross functional groups
0-5 years of experience
- Worked in a cleanroom and processed wafers in the dry etch and photolithography departments.
- Checked the computer to determine what wafers needed to be processed and loaded them onto assigned tools/equipment to start the production.
- Maintained a constant work flow to process wafers that were brought in from other departments or were in the storage areas.
0-5 years of experience
- Ran CVC machine for etching and deposited wafers.
- Measured and inspected thickness using XRF and 4 points probe.
- Inspected wafers under UV light to check contamination, scratch, defect.
0-5 years of experience
- Execute quality control inspections on all completed projects
- Qualified to use SEM/FIB to check quality of projects from engineering
- Able to use LEO, Aurgia, and Hitatchi’s SEM’s
0-5 years of experience
- Knowledge of clean room procedures
- Certified in Sokudo Coater, Alignment, and Development tools
- Certified in DNS Developing tools
- Certified in SRS cleaning tool
- Certified in Nano Metric Measurement tool
0-5 years of experience
- Hired in April 2012 to perform daily wafer fab processes
- Certified in Photo Areas
- Equipments: UT (Ultra Stepper), Bake Oven, Nitel, KLA CD, TEL track, Tencor, IVS, DETEL, and Aligners
- Routine daily quals for all certified equipments
0-5 years of experience
Loaded wafers into machines to be cleaned
- Inspected wafers for defects and metal fragments
- Assembled wafers into cases for next department
- Followed procedures to properly handle wafers
0-5 years of experience
- Use computers data entry and set up daily formulas to maintain the inventory.
- Maintained computer systems for automated product processing to prepare for inventory tracking, shipping, and receiving products.
- Load and unload production equipment to verify part or process conformance to specification with approved inspection.
6-10 years of experience
Process wafers through the manufacturing process on assigned operations.
- Handling wafers, loading/unloading wafers into tools, selecting programs for the tool to run, and performing measurements to determine if process performed correctly.
- Uses microscope to evaluate visual appearance compared to target.
- Enters measurements data into the database.
- Adhere to wafer fab safety and cleanliness regulations.
0-5 years of experience
- Performed wet chemical processes.
- Operated production machinery.
- Calculated and logged technical data for statistical process control.
- Calculated numerical data
- Trained coworkers to perform various manufacturing procedures.
- Monitored product quality.
- Troubleshoot/Problem solve.
0-5 years of experience
- Sets up, operates, and coordinates work station activities in a wafer manufacturing or test area devoted to both production and process development.
- Performs production processes in accordance with documented specifications and production schedules (will require utilization of CAM/CIM systems to perform job duties).
- Monitors the manufacturing process or equipment indices using statistical methods to ensure quality.
- Recommends improvements to equipment processes using statistical techniques and other methods.
- Interacts with other team members toward the solution of problems and the fulfillment of manufacturing objectives, and participate in natural work group teams for continuous improvement.
- Communicates with other team members in the manufacturing environment.
- Performs basic equipment repair and preventative maintenance.
- Makes routine decisions affecting production material, equipment, and processes.
0-5 years of experience
- Setup lots/wafer for photo chemical resist processing
- Stage/Retrieve/Return reticles for photo tools as needed depending on recipes/specs
- (Test)- run quality a pass or fail test on wafers to determine flaws to rework
- Record/Enter data for each stage of processing
- Track in and out wafers when tool is done processing. Send on to next stage
- Qualify tools/(TEST RUN)machines for optimum performance run cycles
- Load and unload finished lots and transfer to the next area
0-5 years of experience
- Worked in a clean room manufacturing wafers under limited supervision.
- Responsible for the basic processes of production, such as: baking, aligning, inspecting, etching, and cleaning the wafers.
- Responsible for tracking the production queue and ensuring quality of final product.
0-5 years of experience
- Work flow management
- Product quality care
- Inspection of product
- Operating production equipment
- Reading and monitoring production graphs
0-5 years of experience
- Plasma stripped wafers in a clean room
- Inspected Wafers off of high tech machinery
- Ran particle check quals, and strip rate quals on Plasma strippers
- Verified probe marks on wafers
0-5 years of experience
- Responsibilities were to execute in a timely manner the correct disposition of wafer material deemed non standard or requiring special processing or assistance through communication with correct personnel which includes but not limited to manufacturing, engineering and yield enhancement personnel.
- Responsible for gauge studies on select tools as well as responsible for running experiments, tracking lots, analyzing data, identifying deviations from standards, and using a systematic problem solving approach to address issues.
- Able to use the systems for the purpose of updating specifications, whether for process and or tool dispositions as well as manufacturing operational specifications.
0-5 years of experience
- Following safety and rules
- Providing customer service to consumers
- Wearing proper protective equipment
- Handling wafer/Fabricating wafer
- Stripping wafer
- Ashing wafer
- Recording every step that is taken handling the wafer
- Cleaning machines after use
- Preparing for next shift
Rate This Article
Wafer Fab Operator
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
