- Featured in:
-
More Quality Control Technician Resumes
Use these Quality Control Technician samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Quality Control Resume Samples
Quality Control Technician Resume Samples
No results found
6-10 years of experience
Ensured quality of manufactured products using computerized software/hardware that controlled automated industrial machines.
- Monitored separate computer network components in multiple production environments in the manufacturing process.
- Resolved technical issues between software, hardware.
- Planned, tested, and executed parameter changes in production that increased production material by 60.1%.
- Commended for technical, analytical, and problem-solving skills; effective task prioritization.
6-10 years of experience
Documented and recorded Department of Transportation reports using Microsoft office Excel
- Measure area to be paved and monitored temperatures of asphalt trucks
- Set rolling patterns for paving train to achieve and maintain density, and monitor spread rate
- Cut density cores, checked and recorded cross slopes, and pulled rolling straight edge
- Worked closely with Verification technician
- Promoted to Quality Control Technician
- Chosen to be s Safety Committee Member. The committee established and implemented safety rules and procedures
0-5 years of experience
Performed quality control and assurance spot audits and inspections in all technical aspects at key disassembling and fielding stages on vehicle systems. MRAP vehicles, 5-Ton 900 series, wreckers and various equipment in support of the WAR FIGHTERS. Coordinated actions of other contractors assisting government personnel, and ensured effective utilization of personnel, provided professional and personal guidance in complex problem solving and decision making.
- Worked in collaboration with government contractors; attended weekly meetings; screened reports for completeness and accuracy; coordinated logistical support for various training; managed the retrofit program; and coordinated support with military customers and vehicle preparation activities.
- Monitored and provided input into improving the efficiency of installation processes and procedures.
- Conducted spot checks to verify vehicle VIN numbers, vehicle cleared of biological hazards, and explosive hazards, and ensured maximum readiness of vehicles.
- Performed initial and final inspections on sustainment trucks as well as technical inspections on all returning vehicles including Maxx Pro ISS upgrades.
- Conducted Estimated Cost of Damage (ECOD) on Sustainment vehicles including parts and man-hours research, forms completion, vehicle inspection, and repair procedures.
0-5 years of experience
Responsible for inspecting raw materials as well as intermediate and finished products, along with adjusting formulations to meet specifications. In charge of general maintenance and upkeep of the laboratory and equipment.
- Trained in ISO 9001, CLIA, GLP and GMP regulations and their applications in a laboratory setting.
- Monitored and recorded all outcomes and discrepancies of testing
- Reviewed and recommended compliance issues to meet quality specifications
- Handled biological materials for quality testing
- Trained new laboratory technician on all procedures and testing methods
- Wrote all non-conformance monthly reports using SAP
- Organized and inventoried retain samples for quality assurance processes.
0-5 years of experience
Performed welding and dimensional inspection of welded and fabricated components according to engineered drawings, company procedures and industry standards.
- Prepared non-conformance reports and ensured they were closed out satisfactorily.
- Identified root causes of production non-conformances and helped to avoid any recurrence.
- Helped with welder testing for hiring.
- Coordinated NDT activities on projects in the area of competence.
0-5 years of experience
Using a wide range of lab equipment independently tested and evaluated fluids, raw materials and finished coated products from five fullweb coaters
- Expanded and reorganized lab standard books by products. Maintained and updated these as new defects were discovered or customer requirements were changed
- Monitored product quality and reported results back to coating & converting operators
- Perfect Attendance
0-5 years of experience
Performed quality inspection of incoming components, in-process materials, and finished products in a cGMP environment.
- Conducted materials identification using FT-IR, and dimensional testing using RAM Optical, Calipers, Micrometers, and Depth/Pin Gauges.
- Assisted in Gage R&R studies and statistical process controls, validations of equipment and QC testing methods.
- Prepared reports on quality related activities; maintained laboratory notebooks in support of product development.
- Executed particulate testing on incoming components and durability testing of the products using Zwick/Roell.
6-10 years of experience
Reporting to Quality Control Manager and Director of Operations while performing various testing on production lots, raw materials, samples and returns. Entered test results into business management software and created Certificate of Analysis. Communicated with Quality Control Manager on investigations into customer complaints and helped identify root causes and identify corrective actions.
- Wrote Standard Operating Procedures for position and organized and maintained lab files.
- Maintained boxes of production and sample retains.
- Calibrated lab equipment and assisted with maintaining equipment in department.
- Followed Good Manufacturing practices (GMP) and safety procedures in plant and lab.
0-5 years of experience
Monitored quality metrics using Gainseeker Statistical Process Control Software, to ensure product was in accordance of customer specifications.
- Used statistical and quantitative methods to determine appropriate process changes to maintain control of container dimensions as well as process efficiency
- Monitored production volumes for meeting daily production quota (4 million units daily)
- Produced downtime reports for reporting to plant Superintendent.
- Documented all quality events, and required process changes.
0-5 years of experience
Performed incoming, in process and final inspection tests procedures for all products, including high profile, customer specific requirements, i.e. NASA, Seagate
- Maintains organized quality control records and inputs the quality data into database for analysis
- Complies with ISO 9001, 14001, OSHAS 18001 standards
- Knowledge of analytical testing equipments; DSC, FTIR, Instron, Viscometers, Rheometers, Hardness
- Trained to become 5S expert, through audits and visual controls lead manufacturing facility to 5S level 4
- Internal auditor for ISO 9001, 14001 and OSHAS 18001. Led facility to “best practice award” two years in a row
0-5 years of experience
Managed and developed Technical Operating Procedures
- Calculated raw material weights for costing of new and existing electrical wire products
- Prepared product specification and costing data to Sales and Marketing
- Provided Operators and QC Inspectors with critical process data for manufacturing of drawn and stranded wire
- Performed detailed inspections on various types of electrical wire and used a micrometer to measure wire insulation
- Evaluated construction integrity of copper wire and metal clad armor against accepted industry tolerances
- Inspected finished product to ensure properly tested for continuity, high voltage and verified results were within required limits per Underwriter Laboratories (UL)
0-5 years of experience
Inspected stack components of energy efficient generators with precise use of various machinery and basic visual testing
- Collaborated with engineers for special research and development projects
- Communicated material reports regularly with engineers
- Regularly calibrated and maintained lab equipment and machinery
- Released inspected production parts into inventory using Oracle application
- Conducted basic material transactions by Oracle
- Physically moved inventory into warehouse locators
- Monitored material flow from warehouse to lab for material traceability
0-5 years of experience
Conducted routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples.
- Interpreted test results, compared them to established specifications and control limits, and made recommendations on appropriateness of data for release.
- Performed visual inspections of finished products.
- Compiled laboratory test data and performed appropriate analyses.
- Completed documentation needed to support testing procedures; including data capture forms, equipment logbooks, or inventory forms.
- Calibrated, validated, or maintained laboratory equipment.
- Supplied quality control data necessary for regulatory submissions.
- Received and inspected raw materials. Investigated or reported questionable test results.
- Used a printer, facsimile, photo copier and scanner to scan documents in the computer.
0-5 years of experience
Inspected mechanical & electrical components for compliance to standards and drawing, CSA/UL requirements
- Performed in-process inspections in all areas of in-process manufacturing
- Data reporting by computer program
- Performed audits
- Developed process & modified existing ones to improve product quality
0-5 years of experience
Assisted quality control engineers with analyzing part specs using Access and Excel programs.
- Attention to detail when visually inspecting parts.
- Performed tests on engine parts to ensure they meet internal and customer specifications.
- Led daily production meetings on behalf of quality control and presented information regarding quality concerns.
- Able to quickly grasp a very complex manufacturing process in order to better perform and excel in the position.
0-5 years of experience
Used Quality Control Laboratory testing equipment and procedures.
- Monitored all performance in production and conducted quality control activities to prevent encountering any problems which would result in delays in production.
- Maintained all record keeping systems and entered data into BAAN system.
- Ensured that hazardous materials and waste were managed safely.
6-10 years of experience
Works with G.S.E mechanic on mechanical, hydraulic, pneumatic, fuel filtering system and electrical vehicle discrepancies.
- Maintains daily, weekly, quarterly and monthly reports for all fueling requirement delegated by the ATA 103 Standards for Jet Fuel Quality Control and MIL-STD-1548E.
- Liaison between Airline and Military Auditors for monthly, quarterly, and yearly audits.
- Collaborated with G.S.E. Program to resolve vehicle discrepancies, designed program for tracking and monitoring filter usage, introduced Vehicle Discrepancies Report for tracking all hours on maintenance and parts cost.
- Implemented quality control procedures for day-to-day operations within the requirements for ATA 103 Standards for Jet Fuel Quality Control.
- Yearly Hazardous Material Handling and Shipping Certification for preparation of quarterly military fuel samples, or re-certification jet fuel.
6-10 years of experience
Analyzed chemical formulations and coating solutions of photoresist materials using analytical and functional testing methods including percent solids, viscosity, GC, UV-VIS, density, film thickness, particle testing, and Karl Fischer titration.
- Worked closely with QC personnel and other departments to solve problems.
- Prioritized incoming samples and analyzed multiple samples simultaneously.
- Trained three new employees in QC procedures.
- Entered data into computer using MS Excel and prepared COAs for customers.
- Answered questions from outside auditors.
- Worked in clean room environment.
- Prepared and packaged chemical solutions and materials, following standard procedures for sale to customers in the semi-conductor industry.
0-5 years of experience
Quality Control Tech
- Responsible for 10 manufacturing lines
- Responsible for the gauging and measuring standards for all products manufactured thru the facility
- Created written documentation on an hourly basis that all products produced met customer’s standards
- Made sure all other employees were following GMP’S
- Reported directly to Quality Control Supervisor when working within the Laboratory
0-5 years of experience
- Performed inspections of packaged items verifying the reservation was suitable for shipping. Verified the overall quality of the packaging procedure. Checked for missing items, damaged items, packaging size, customer documentation, whether the package was to be wrapped, and other quality related issues defined by the quality team and management. Made approval or rejection decisions for questionable and obvious defects.
- Created audit reports based upon quality control inspections.
- Communicated results to management and those audited to ensure proper quality control procedures are followed. Assisted in training staff on quality control procedures.
- Recommended improvements to the customer reservation for quality control audits.
- Performed picking, packing, shipping, and returns processing as needed.
0-5 years of experience
Performed quality control checks on runs and samples following standard operating procedures
- Ensured reports on tested samples contained accurate genotype and phenotype data
- Worked effectively with others and ensured integrity of testing procedures and policies.
- Communicated with Client Relations, lab and management in order to achieve company turn around time policies
0-5 years of experience
- Utilized GIS technology to perform Quality Control checks to imagery based data
- Determined product specifications from existing documentation, recorded findings, and compared findings to set quality criteria for acceptance or rejection
- Analyzed data and wrote summaries to validate or show deviations from existing standards
- Recommended modifications to existing, or suggested new, standards, methods and procedures
- Updated project layer files and views databases for use of team members
0-5 years of experience
Perform Managers roles and responsibilities when the Manager is not available; perform quality briefing, take part in quality meetings assist with program and procedures corrections as required.
- Perform internal audits of DynCorp Programs and Standard Operation Procedures (SOP)
- Analyze issues in Procedures / Programs and established strategies in order to resolve deficiencies and discrepancies in the quickest time possible
- Monitor performance in Property, Human Resources, Subcontracts, and Combating Trafficking in Persons (CTIPS), Finance, Postal, and Archiving of documents, Vehicle Maintenance, Material Handling Equipment (MHE), and Movement Control Transportation (MCT).
- Conduct quality control activities to prevent encountering any problems which would result in delays in programs or procedures.
- Construct detailed reports of performed Audits and perform corrective actions required in compliance with the quality standards pursed by the quality Manager
0-5 years of experience
Supervised the production of employees and the processing of agricultural products in a manufacturing environment. Checked and assessed the quality of production. Reviewed averages and quality levels and made adjustments if quality standards were not met.
- Trained sorters on efficiency, producing improved product while following company standards.
- Monitored and examined finished boxed products, controlling volumes, box quality and order’s accuracy.
- Tallied products for the distribution and inventory process.
- Used a company outsourced Quality Assurance Lab for sampling or further testing. Collected daily samples of product and drove to facility for testing and record keeping.
- Worked with organic products of different size bags, water levels, and maintained records of Salmonella, E-coli, micro (done on organic product).
- Assisted Human Resources Department with general administration duties including the generation of new hire packets.
- Assisted in the inventory control of agricultural production, ensuring supplies were stocked by manual count.
0-5 years of experience
Conducted Daily Finished Case Inspections for final product
- Addressed appropriate personnel on quality issues.
- Conducted daily tests for paper integrity
- Collected samples of finished product for retain purposes
- Investigated complaints
- Maintained a lively and compassionate atmosphere for open communication and best quality attention.
- Other duties as directed.
0-5 years of experience
Ensure proper specification of paperboard rolls, die cut WIP from presses as well as the proper quality of finished goods
- Utilize multiple quality control testing equipment, including calibrating the testing
- Organize, and coordinate the sorting/rework of Non-conforming materials.
- Works avidly as a part of the safety committee
- Physically and Electronically monitored inventory of various goods and machines to ensure inventory accuracy
- Reconciled any material discrepancies
- Cycle counting of randomized warehouse bin locations to maintain daily inventory
0-5 years of experience
Performed installation, integration, repair, quality control and testing of professional wireless systems, earphones, headphones, and other professional audio products.
- Worked closely with quality control engineers and project managers to diagnose and repair complex malfunctions requiring extensive knowledge of a variety of electronic controls.
- Handled, utilized, and maintained inspection and testing equipment to ensure serviceability.
- Analyzed processes, test results, and procedures to improve company efficiency.
- Conducted self study to improve and maintain technical proficiency in company’s product lines.
0-5 years of experience
- Performed detail-oriented reviews of workshares created by GIS Technicians for quality/accuracy
- Created error databases in ArcMap and communicated verbally with GIS Technicians to provide feedback
- Collaborated with other Quality Control Technicians and GIS Technicians to find solutions to potential discrepancies between workshares
- Merged multiple workshares into larger databases
- Utilized a variety of tools, such as GAIT (Geospatial Analysis Integrity Tool), to ensure a polished product
- Praised for high quality work at this level, and was given opportunities to co-lead training groups
6-10 years of experience
- Perform testing on raw materials, plant solutions, and in process samples to ensure conformance to established specifications.
- Perform all analytical tasks, including calibrations, maintenance, and repair of analytical equipment.
- Assume role of supervisor in his absence.
- Input data into SAP for conformed and non-conformed material.
- Developed and enhanced existing products through independent research projects.
- Trained in polymer chemistry, especially free radical polymerizations.
- Generated monthly reports of studies and presented topics at quarterly division meetings.
- Identified and resolved problems involving product performance and quality issues.
0-5 years of experience
- Performed physical testing of finished cement and mortar products to ensure conformity and quality
- Utilized handheld photospectrometer instruments for analyzing finished grout product colors; recommending formulation changes based on color match results and pigment content
- Tested and approved use of raw materials of all incoming shipments prior to use in the products
- Authorized or held shipment of finished products based on the physical testing results and given specifications
- Collaborated with the R&D division for testing and troubleshooting of new products
- Performed data entry, equipment maintenance, calibrations, and standard laboratory upkeep
0-5 years of experience
Maintained aspects of Quality Control to ensure quality and safety of work in process and finished goods to ensure exceptional products for the customer
- Evaluated incoming raw materials to ensure specifications, quality and food safety
- Responsible for compliance with food safety regulations making certain the plant met proper sanitary conditions, including allergen control
- Performed quality checks and HACCP procedures daily
- Calibrated various equipment in the laboratory and on the production floor
- Quarantined product that lacked quality and/or safety standards by putting on hold
10+ years of experience
Performed quality checks of work in progress on printers and enveloping machines.
- Informed operators and management of quality issues.
- Helped fix out of balance situations.
- Processed recoveries and returned mail.
- Assisted inserting machine operators in running their enveloping machines.
- Developed an Access database to track recoveries.
- Developed an Access database to track daily jobs in the computer room.
- Documented quality control procedures.
- Provided information for security audits and SSAE16 audits.
0-5 years of experience
Served as a quality control technician for automotive transmission remanufacturing industry
- Assisted in quality manufacturing using measurements, data and analysis
- First article inspection of the manufacturing process and vendor supplies
- Precision tools control and calibration
- Trained production and quality inspection crews
0-5 years of experience
Oversaw the process of testing motor control panels to ensure quality prior to shipment to the customer.
- Effectively monitored the packaging and shipping control panels and parts.
- Maintained an accurate inventory of parts on site.
- Actively worked with the engineers to resolve issues that would arise.
0-5 years of experience
Generate and working from ISO and GMP documents involved in manufacture and quality control
- Perform daily maintenance and quality control of a small QC lab of automated blood counter units
- Determine suitability of manufactured reagents based on chemical and functional properties
- Implemented a treatment protocol for the disposal of potentially cyanide bearing waste
0-5 years of experience
Performed routine and non-routine chemical and physical analysis on a variety of materials for the support of production activities
- Compiled, evaluated and submitted results of tests into Laboratory Information Management System (LIMS), Sapphire and SAP
- Routinely review procedures and submitted corrections to the Lab Superintendent for updating
- Provided input in developing improvements to existing procedures and techniques
- Performed necessary mathematical calculations and interpret data for Certificate of Analysis submittal
- Created Certificate of Analysis for all finished products
- Wrote work permits
- Prepare chemical stock solutions, standards and reagents.
- Good housekeeping and maintenance of all laboratory equipment
0-5 years of experience
Maintained and controlled traffic through construction zones
- Conducted field level technician 1 tests on appropriate materials
- Submitted data promptly to supervisors and managers
- Obtained, collected and compared samples of various materials
- Prepared and mailed sample results to the Federal Inspector’s Laboratory
0-5 years of experience
- Responsible for sampling raw materials, in-line process and finished product
- Performed quality control analyses on raw and finished products according to specifications.
- Performed calibration, instrumentation and troubleshooting on Lab equipment
- Recorded and documented results
- Provided solutions to in-process batches that failed to meet customer specifications.
0-5 years of experience
Testing and approval of all incoming raw materials.
- Coordinated collection of finish good samples and ensure delivery to customer.
- Performed quality testing on finished products
- Responsible for placing nonconformance products on hold and resolve quality issue.
- Conducted inspections of final packaging.
- Responsible for maintaining laboratory supplies.
- Trained new employees on lab procedures and test methods.
0-5 years of experience
Perform bench work analysis according to SOPs including protein, ash, chloride, lipids, pH
- Test all incoming raw material and outgoing, finished product to ensure standards are met
- Pinpoint variations within analytical results, record variances, suggest probable cause, and propose solutions
- Contribute to the Safe Feed Safe Food and HACCP certification process
- Write, review, and update documentation including SOPs (Mojonier Protein Analysis, Batch Solvent Extraction, Dry Ashing, Solids Method) and SDS notebooks
- Streamline processes to increase productivity throughout the day
0-5 years of experience
Computer Assembly including Notebooks, Desktops and Servers. Average 150 systems per month.
- System Diagnosis/Repair, warranty repair
- Customer tech support/Customer Service
- Test the functionality and physical appearance of every system built in our facility.
- Developed software to automate operation system setup and deployment to reduce load time and increase consistency.
0-5 years of experience
Responsible for the quality of machined parts during all phases of manufacturing
- Responsible for all quality paperwork and filing
- Supply customers with proper documentation on delivered part( Aerospace / Military)
- Use of measuring equipment ( height stands, CMM, Laser scanner)
- Able to work in different areas when needed (receiving inspection, 1st piece inspection, final inspection)
- Work closely with engineers and staff to achieve desired outcome.
0-5 years of experience
Testing and approval of all incoming raw materials.
- Coordinated collection of finish good samples and ensure delivery to customer.
- Performed quality testing on finished products
- Responsible for placing nonconformance products on hold and resolve quality issue.
- Conducted inspections of final packaging.
- Responsible for maintain laboratory supplies.
0-5 years of experience
Used laboratory and sensory techniques to ensure the quality of various raw materials and flavor ingredients, so that the ingredients can be shipped to various companies for beverage production.
- Used LIMS data entry to generate certificates of analysis and enter data for each product and material tested.
- Worked with QA staff and the production team to solve and correct deviations from each product and raw material’s specification range.
- Used ATP and Allergen charm unit swabs to check cleanliness of production machinery.
- Trained in SQF and certified HAACP principles to enforce knowledge of food safety.
- Calibrated laboratory equipment and production equipment such as scales and sanitization liquids.
- Participated in HAACP checks, such as validating screening.
0-5 years of experience
Inspected aircraft and aerospace parts for an ISO 9001 and AS9100C certified company.
- Carried out quality control plans using statistical control charts.
- Responsible for ensuring conforming parts were being produced by manufacturing, and for correcting trends in production before nonconforming parts were machined.
- Experience using micrometers, calipers, dial indicators, gauge pins, height gage, optical comparator, profilometer, etc.
0-5 years of experience
- Participated in pilot runs by verifying the accuracy of the Bill of Materials, supervised the production team to ensure samples were manufactured properly, and tested samples
- Resolved production equipment issues involving metal detectors and scales
- Completed daily quality control documentation of the manufacturing operations and facility, hold and rework paperwork, and yearly mock recall reports
- Trained company employees in English and Spanish to comply with health and safety regulations, current Good Manufacturing Practices (cGMPs), and Standard Operating Procedures (SOPs)
0-5 years of experience
Ensure all testing equipment is properly maintained and reporting any equipment problems to QA Manager
- Follow established safety and operating procedures for burn tests and chemical usage in laboratory
- Evaluates data and writes reports to validate or indicate deviations from existing standards
- Report any off specification production, major quality problems and any interruptions or interferences in normal QA procedures to duty Production Supervisor
- Executes laboratory procedures, methods, and techniques
- Performs physical tests of in-process and finished products and materials to measure performance, life and material characteristics
0-5 years of experience
Set up & operate CMMs (Discover III) running PC-DMIS 2013 & MeasureMAX 6.5
- Work in conjunction with manufacturing, engineering & tool makers to ensure a zero PPM defect rate.
- Proficient in use of multiple types of inspection equipment (height gages, profilometer, vision systems & CMM)
- Maintain customer specified tolerances in microns.
- Conduct final inspections prior to shipment in accordance with the part control plan.
- Daily interaction with PLEX MRP system for product history, traceability & historical data collection, as well as product control plans & gage control.
0-5 years of experience
Monitor and sample raw materials for compliance of applicable specifications of local Building Codes and SOP for production.
- Provide Quality Control/Assurance by monitoring concrete productions and procedures for the southern ready-mix plants.
- Conduct plant inspections/audits for conformance to the SOP.
- Provide training to staff & personnel, internal & external programs.
- Observe job site testing and conduct comparison testing with independent testing agencies.
- Communicate with all parties in regards to the design mixes being utilized and admixture dosage rates to ensure high Quality dynamically.
- Assess jobsite conditions and recommend solutions to ensure efficient operations.
0-5 years of experience
- Provided quality assurance of sand to be shipped by rail, truck and bag
- Met customer specifications by grade monitoring
- Tested chemical and physical states of product for in-house storage & customer orders
- Performed data processing for customer analyses, EDI billing & records
- Reported data to shift supervisor, screen house operator & production personnel
- Operated general office equipment
Rate This Article
Quality Control Technician
Last edited by: Gabriela Barcenas, CONTENT STRATEGIST -
Gabriela Barcenas
CONTENT STRATEGISTGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
