- Featured in:
-
More Qc Welding Inspector Resumes
Use these Qc Welding Inspector samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Quality Control Resume Samples
Qc Welding Inspector Resume Samples
No results found
0-5 years of experience
I arranged, coordinated, and audited NDE requirements and did visual inspections of welds.
- I used P&IDs, blue prints, plot graphs and piping isometrics to walk down piping systems and red lined isometrics and other drawings.
- I created work packages and test packages which included weld maps and flange bolt up maps.
- I performed daily inspections of welders, welding rods, and rod temperature. I also was instructed to witness hydro tests on different piping systems.
- I kept up with welder qualifications and checked flange and gasket bolt ups and torques.
- I wrote detailed welding and piping punch lists for foreman.
- I also kept track of x-rays/weld logs and all NDE logs.
0-5 years of experience
Witness Welder Qualification Test, Fit-up Inspection, monitoring Preheating and Post Weld Heat Treatment, Inspection of Dye Penetrant Test, Hardness test, Visual Inspection for welding.
- Monitoring all welding activities for various material such as Duplex, Alloy steel especially for Cracking area of Cross Over and Radiant Coil.
- Pipe spools and support fabrication.
- Pipe spools and supports installation on platform.
- To carry out the Hydrostatic testing.
0-5 years of experience
Checking the preparation of cutting, bevelling, parent material identity, and all that is not allowed according to the fabrication shop drawings.
- Welding Essential Variables: Preheating temperature, consumables and the welding monitoring as well as amperage, volts, travel speed, heat input and inter-pass temperature according to the welding procedure specification (WPS).
- Make sure pre-weld, during weld, post-weld, dimensional control against fabrication drawings.
- Carrying about Visual Inspection: It depends on code requirements and drawings.
0-5 years of experience
Work performed for Petrochemical and Refinery turnarounds and revamps
- Supervision of weld inspection, tracking and production
- Radiography film interpretation
- Coordination of non-destructive testing and heat treatment
- Compliance with company’s Quality Control Manual and ASME codes and NBIC code for “R” stamp repairs and alterations
- Fabrication of pipe and field installation
- Repairs and alterations of pressure vessels and boilers
- Welder/Pipe Fitter, Fabrication of pipe for the unloading oil stations
0-5 years of experience
Final walk downs on completed systems
- Mechanical Pump Alignments
- Verify All documentation
- Inspect Pipe to B31.3 Code
0-5 years of experience
Weld inspection
- Weld mapping
- Hydrostatic testing
- Weld testing for new welders
Rate This Article
[Qc Welding Inspector]
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
